My girlfriend got me the deluxe bluray for my birthday.
Unfortunately the slimer statue has a slight crack in the back under slimers arm. My girlfriend was upset about this after the money she spent on it. I told her its alright and I’d fix it.
I didn’t want her to send it back. Cause..well that just be rude.
Did anyone else have this problem with their statues?
Can you post a pic of the crack. I can probably help you out. I’ve sculpting for toy , stopmotion ect for years. hopefully i can point you in the right direction.
Where did she buy it, and does she have a receipt? You can possibly contact customer service… A lot of times, they won’t ask you to send it back, but will at least give you some kind of a refund…
Yeah, its some kind of air bubble that caused the crack. I figure id paint over it to “seal it” . Im no stranger to art/painting. But i dont know the first thing about which material they used, or how they did it to cause such a crack.(shouldve payed more attention in art history)
I’m a putty type person with repairs with plastic, but I’m not saying that’s the proper way to fix it. Hopefully, some gurus see your issue if you want to attempt it still.
it was more so the fact I don’t want to gamble sending it back for possibly another damaged copy, for all I know all the slimers could be defective. I’d rather be more resourceful and just try to fix the crack.
Yeah thats a S*%t fix. That shell looks pretty thin. Only you can tell if you risk cracking it more trying to fix it. Is it hollow underneath? It looks like there fill (foam or cheap rubber usually) didn’t make it to the shell. But you can certainly fill it. Someone here mentioned putty, you could use that. If you have MAGIC SCULPT that would be great.You can smooth that down real nice and easy with water. But unless your your a sculptor or toy maker you probably dont. You can certainly order it but its not worth the little bit you need for the fix. You talking min 35 +ship.
BUT you can try a jb weld epoxy product its white and comes in a small (3") tube. Water Weld i think its called (home depot). Water weld works better than the others and its White. Cut of a piece, mix well, and fill your cracks as close/smooth as you can. Once it hardens give a sanding. ( thats a tough spot there) get it even and smooth.
PAINTING - this will be your hardest part, you have to attempt to match it.Go acrylic - youll be fine - Paint some greens on a test piece of water weld, let it dry and see the match. airbrush is best, but i don’t know if you have access to that stuff. If not, get a nice brush and try and work it. Work in layers. throw down a base, a little highlight with a dry brush (very little paint on that part) and then do your best.
To make it look wet. Thats probably got a sprayed varnish on it. you can get a liqitex gloss medium though and brush it on. It should self level. If thats not glossy enough, get a 2 part clear 5 minute epoxy, Gorilla glue makes a good one. Mix and brush it on. it’ll also self level which is good, but in the=at spot may be tough to control. Tilt that sculpture on its side maybe.
So thats a lot if you have’nt done it and you’ll spend a few bucks. So if it can be returned i would do it. I’ve done plenty of work in the toy industry and thats BS right there. There trying to save a buck. That shell should be a thicker rotocast.
sorry for the spelling, i have my 6 month old son on my lap.
ill check in a little later.let me know. and if your really willing to try and fix it. i can break you off a piece of magic sculpt and send it your way.