I’m writing two versions of this car’s build and history. One is for Proptopia & TheEcto-1.com, the other custom tailored for GBfans.com
GBFANS
<I>*Ectomobile*</I>, bitches! <<I>*Insert latest stupid internet meme here*</I>> This ride is sick!! Me wanty? U can't has! Check out the pics, get your lolz and then go Facebook about it. Get off my lawn.
PROPTOPIA / THEECTO-1
Esteemed colleagues, thank you for taking a moment to read my lengthy post. This is my Ectomobile. To be specific, this car is co-owned by my friend Eric and myself. Some of you may look at this and think “Hold on, that’s Venkman71’s” and you’d be half right. It did indeed used to belong to Sean but not in its current incarnation. There’s a bit of a story and I know it’s a bunch of blah-blah reading to some of you but for those of you who care, this is the one and only time I’m ever really going to tell it. This car was taken right down to the frame and started over from scratch.

-
Background
The car is a 1959 Cadillac Superior hearse. For those of you new to this topic, one doesn’t simply call a car like this a “59 Caddy” and assume they’ve identified it. Cadillac would build these commercial chassis cars which are basically frames with just the engine, fenders, hood, front windshield and front doors. This commercial chassis is sold to various coach builders who, in turn, create working “professional” cars. Coach builders of this time were companies like Miller-Meteor, Sayers and Scoville, Eureka and Superior. If Cadillac built about 1,000 commercial chassis cars for this year, it’s easy to understand how each company was able to buy only 200-300 of these cars. From there these cars could be turned into a hearse, ambulance, combo, or limo. The Ectomobile was a '59 Cadillac Miller-Meteor combo. Our car is a '59 Cadillac Superior hearse.
-
Here’s a link to GBfans that shows a gallery of what it used to look like when Venkman71 took it from hearse to Ecto:
http://www.gbfans.com/fans/props/ectomobiles/53/1/
…and a pic courtesy of AJ and GBfans.
-
The Sean years
Sean bought it as a hearse and did the initial restoration about 2000, also converting it from a hearse to an ambulance. Time, money and ( the most important ingredient ) care were put into it. The end result was a pretty spiffy looking Ectomobile. The full story is here:
http://www.proptopia.com/viewtopic.php?f=1&t=7831&p=107208#p107208
For those of you who can’t access Proptopia, here’s the link to Brad’s acticle:
-
Our Project
Back in 2005 Eric and I decided to build an Ectomobile. It’s not the type of venture that either one of us would have done on our own but with two of us doing it? Sure. We were in a good financial position at the time so we set off to make it happen. After a year of looking for a car we bought this 1960 Miller-Meteor 3-way hearse. ( 3-way = the hearse table can slide out of the car to the rear or both sides. ) It took minutes to complete the sale and months to find someone who would transport a non-operating 21-foot long, 5,000 lb car from NY to CA. I’ll spare the details but it was late 2006 before we got our car.
- Once the car was finally here we spent about 2 months cleaning it. Snake skins, dead mouse corpses, and old ammonia capsules were amongst the rust-covered treasures in this vehicle. It was going to be a load of work but we were up to it. We just needed a place to work on it, and our apartment complex wasn’t the venue. After another year or more of looking we finally found a house that was close to both of our workplaces, AND had room for an RV ( because this car and our tools take up a lot of space ) AND an owner who didn’t mind us welding. Now it’s February 2008 and our project is ready to begin, right?
- The house was dilapidated to the point of injury. The owner could argue that things worked fine and that it was just an issue of the tenants being picky. I guess I have an issue with original outlets from 1959 that, when you stuck a plug into them, the plastic crumbles allowing the electrical leads to short out. Technically he was right that there were things he didn’t have to fix but then you ( as a person who doesn’t want to get injured ) end up fixing them for your own safety. The previous tenants were often bitten by rattlesnakes who lived by the front door. If you don’t want to get bit, you take a couple of weekends and trim it all back. This ended up taking months. The owners’s stance = You do your own landscaping.

- Over the next year I spent about $4,000 or more fixing up a house I only rented and didn’t even own. Sure, I’d call the owner when it was something he absolutely couldn’t get out of, but otherwise if it was on the fence then that meant it was up to me to fix or learn to live with the consequences. Over the years we have stepped on a scorpion in the kitchen with bare feet, are surrounded by rattlesnakes and a couple of months ago encountered a tarantula hawk that backed out of the house’s open door while dragging a kicking & screaming tarantula. Hopefully you can see what I was up against and might understand why I had to devote so much time into just making this house not fall apart and no one get stung.
-
About 2009 we were FINALLY ready to begin our Ectomobile project. …and we would have, had Eric not been interested in a Nite Owl suit about March 2009. (sigh) We dedicated the next 4 months to making that and let me tell you this was the most stressful project I’ve ever worked on. Arguments, injuries, deadlines, laziness, differences of opinion, lack of involvement by those to whom this project mattered most… I want those 4 months of my life back. After Con 2009 it took me until December to recuperate and want to start on the Ecto again.
-
Spring 2010 brought an interesting possibility. Over the years, Sean and I had talked about the possibility of buying his Superior but I always thought it would never happen. I was sure I could save this 1960 instead. Even though it had been discussed since about 2005 it always amounted to something we just idly bantered about. Deep down I think Sean and I both took this possibility pretty seriously.
- By March 2010, the deal we had talked about for 5 years was a done thing and Eric and I were now headed home in our newly purchased ’59 Superior to replace the 1960.
- As Eric and I soon found out, this Superior suffered from three major problems.
-
Nebraska
-
Mistah Fab
-
Jerry
-
- It was cared for by another person out of state ( Nebraska? ) who left it on the side of the road by his shop. It garnered a lot of attention and there’s no telling how much/little supervision this car was given while passersby stopped for pics and did whatever else they wanted with the car. Imagine the shop being closed at night while everyone is gone and the car being left outside 7/24. Here’s a video of some idiot 20-something enviro-do-gooders who think they’re “making the world a better place” by defacing the car with a decal.
-
- Mistah FAB. Most of you don’t need an explanation about this one. For the newbies, Mistah Fab alleges to be a rapper. He borrowed Sean’s car with the promise of caring for it ( the exact terms were stipulated, and later violated ) as well as transporting it from Nebraska back to Los Angeles. Once here to be used for their video “Ghost Ride It” the Mistah Fab crew got right down to breaking a 50-year old car. Instead of towing it on a flatbed trailer as agreed they drove it on the street. Doors were opened, doors were stood on, hinges were bent. Rappers held onto the ladder and bounced up and down, collapsing the quarter panel. Rappers stood in the roof rack, shaking side to side and bending metal. Rappers danced on the rear deck with the rear door open, breaking the wooden floor of the hearse. ( Unlike modern cars, older professional cars had a lot of wood in them. The rear floor was just wood. ) Handles were snapped off, spotlights broken, windows cracked, you get the idea.
-
- The worst damage, at least in my opinion, came from V71’s mechanic. The first time I saw the car it had a fuel line with the words “not for use with fuel” stenciled on the side. This set the tone for discoveries to be later made. Instead of 5 wires from the dash to the rear of the car I found a rats nest of 11-17 wires in places with exposed ends touching the frame and scorch marks. A fuel pump that was obviously broken and yet passed the mechanic’s inspection leaving him to say he couldn’t find the cause of the fuel feed problems. A carburetor that was said to have been “just rebuilt” and yet gushes fuel from the ruptured and crusty gasket. An oil leak that could “never be solved” but was solved in 15 minutes when Eric simply replaced the valve cover gaskets. A driver door window that constantly breaks and could also “never be solved” but turned out to be a loose screw in the inner track of the upper window receiver. Here’s a cool pic of the cardboard floor under the passenger side of the car.

- The biggest injustice as far as I can tell is that sometime between V71’s last possession of the car and our trip to see it, many parts seemed to have disappeared. A section of the grille, some of the turn signal light buckets, trim pieces here and there…. All things that I can see that once existed in previous pics of Sean’s car and now they were mysteriously gone. Let’s do the math. The car is in the hands of a man who fixes old Cadillacs where it sits at his shop, parts disappear, and he had no idea what happened to those pieces. Hmmm…. You figure it out, I sure have. I have a list so long that I’m not going to continue. Let’s just say that for a professional classic Cadillac mechanic, he made more ( and worse ) mistakes than if this car had just been taken to a local Pep Boys for repair. Here’s a good pic of a missing grille section.

-
Eric and I brought the car home on March 13th 2010 with V71 running shotgun. It died out once but otherwise made a sluggish trip home. Comic-Con was in 4 months and that gave us a certain goal to make it work. What we didn’t know is that in just a few weeks we would be advised by our landlord that he had lost the house to the bank. The bank notified us that they wanted us out immediately and we fought back by forcing our hand on the federal requirement for 90-day notice. This notice came at the same time our car came back from all the body work, more on that later.
-
These pics are posted mainly for those of you who think this car was just bought and brought home in cherry condition, ready to go.


- Previously we thought the Comic-Con July 2010 deadline was just a guideline. We thought if we missed it, it was no big deal because we could take until Halloween or longer if we wanted. Now it became apparent. We had 90-days to move out AND build an Ectomobile. There was little likelihood of finding a house with RV lot, AND in a good location AND with an owner that didn’t mind welding in just 90 days. It came down to “build it in the few months we had” or sell the car and give up.
F***!!!


- In the first month we did the obvious. We got quotes for body work ranging from $8000-22,000 and ended up selecting the best shop for the money. A month later we got the car back. It wasn’t “cherry” or perfect but it was pretty damned good. Could you get a car done without overspray or any residual issues? Sure, but it would cost you $22,000 for a ’59 Superior. Could you get it cheaper? Sure, but there will be overspray and shortcuts will be taken. Deal with it, right?









- So here we are with 3 months left, a notice to vacate the house, and a pressing need to build an Ectomobile based on my design which is so f***ing complicated that it’s well beyond the studio’s movie-used car. For many this would be an insurmountable goal. I don’t usually play the ego card but there was this little voice in my head said “You’re Bryan ■■■■!ng Fear, you can do anything you want except fail. Get to work.” …and so I did.



- The spotlight was installed using the wrong bracket and for that matter, was broken anyways. I used rivets and plumbers putty to splice this 1950’s spotlight head onto a 1970’s spotlight shaft, and then connect it to a 1990’s handle. I could never have done this if I hadn’t spent my 20’s working on security and cop cars installing spotlights and lightbars. Eventually I had to even drill a new port into the dash.

- Unable to find some pieces for mounting the grille I ended up fabricating my own brackets and some of the interior pieces for the door locks and mechanisms. Almost none of the locks worked.

- The rack was built and the windows tinted.



- The turn signal buckets were literally rotted out. You could put a bulb in them but there was a 50/50 chance it would receive current or short out.

- About 80% of the car’s wiring was replaced from various locations, dash to tailfins. Eric turned a wrench under that hood every night after work. We bought a 59-60 Cadillac shop manual a few years back. This was an indispensable tool. Fuel pump, spark plugs, wires, distributor,… You name it, he was in it. In any place where an old part could be replaced by something of a newer technology we did. The current distributor is some weird magnetic linear induction thing I can’t really explain. Meanwhile I installed dual batteries and an isolator, as well as running 8-ga wire from the battery to three termination points. ( On the transmission hump or “the brain”, on the bulkhead deck or “the heart” and up to the roof to meet with the rack, aka “the appendix.” ) We fried one coil and had to buy a second but other than that, things went pretty smoothly.







- Eric had a major project on his bench, one of several I’ll admit I didn’t even want to touch. It’s at a moment like this that I realize I’ve underscored his name in this story. Eric rebuilt the dash. I’m cool with wiring but only to a certain degree. I have no idea what part of a distributor coil to touch and which one will kill you. I know a speedometer spins but not how or why. I know bulbs light but nothing about the difference between bulbs in series versus in sequence. Eric removed, cleaned and rebuilt the dash. His efforts not only made the bulbs work but we also found that it was ( get ready for it ) a mere bulb on the dash that had been the cause of this car to never charge the battery of 12-14v as expected. The alternator only put out 11.5v power which equated to a slow power drain for V71 in the past. It took cleaning and rebuilding the instrument cluster to repair that. Although Eric was able to repair or replace most parts on his own, it took a professional classic car speedo repair shop to make that speedometer work again.

- Decals went on and a car-cover were custom fabricated for this car. The car cover has a custom fit 16" high box on the roof from Par 46 lights to Par 46 lights.



- Trim was replaced or fabricated, antennas were installed and wired to work, not just be a prop, vents were drilled and installed, tail-lights and lenses replaced, and the tail lights were modified to have LEDs in the normally non-lighting red reflector at the base of the rear bumper.


- Rear decks were cut, seats were installed, glass was replaced, headliners repaired, chrome polished and SEVERAL missing car parts were replaced. I laid out interior wiring harnesses for all items being put in today and for future expansion. Various vendors were hired and brought to the house for window tinting and numerous other repairs that simply required they come to us. None of the doors had the same locks so all cylinders were pulled and brought to a locksmith for rekeying. Apparently on a car this old, this is a big deal and hard to do. Some of the doors were missing interior locking pieces and couldn’t lock so I had to have a metal shop fabricate the pawls and rods that fit into the door. These here pawls were $100 and were carved by a CAD program. I would have been happy with bent steel but (shrug) the guys at the metal fab shop figured this was the way to go. This project has been a hundred times more expensive than I ever figured.


-
Over these few months we spent about $15,000 beyond the purchase price of the car. I’m looking over the spreadsheet of receipts I documented and we’re at a minimum of $15k. Eric hasn’t entered all of his receipts onto this spreadsheet so my gut feeling is that we’ve spent a lot more than that, maybe another $2k or so.
-
Endgame
Two weeks ago I told work I’m taking off for 2 weeks to finish an Ecto and prep the house for moving. In the last two weeks I’ve been getting minutes-to-hours of sleep every night. Most people’s Ecto’s have a static rack and that’s cool, but I want to pull into parking garages or put a car cover on with ease. Come to think of it, I want to lower the rack when we’re on the freeway so that nothing gets ripped off. The rack I built has linear actuators that raise and lower everything.











- About the same time as we were cutting away the floor and installing a rear deck, our 1960 finally got hauled away. We sold it a few months ago but the new owner was unable to remove it until just now.

- On Tuesday July 20th I was entering a nervous breakdown due to nerves, exhaustion and hypoglycemic complications. I was vomiting and taking occasional naps despite an overwhelming need to complete the build. The only reason we made it to Con was because my friends Kirby and Chris came over to help me and Eric. After hydrating and forcing myself to stay awake through it all I finally snapped out of it around 6pm and got back to work on the car with my dedicated team.



Me and Keith Hargrove of Sony
-
We never got 2 very major things built. I wanted a really cool center console rack. I have all the pieces but need about 2 weeks to make it. I also wanted the sniffer tower ( aka – “guns” ) to be automated. On Tuesday the four of us knocked out some good temporary placeholders for both.
-
Intended:
[list]GUNS = Would raise up in two stages with linear actuators. Platform would support a remote controlled spotlight that would have its lens replaced by the red sniffer barrels. The barrels would each have a night-vision cam.
CONSOLE = would house roof rack controls, camera controls, lightbar slidebar switch, buttons for underbody neon FX, siren, airhorn, CB radio, Jensen CD/DVD player/XM satellite Radio, emergency band scanner, phase throttle, and 3-way audio output switcher. ( Switcher would select audio input to the speakers to come from either the siren sound board, the car stereo or he PA system. There are dual speakers in both the front and rear lightbars. )[/list]
- Current:
[list]GUNS = wood and plastic. Does nothing. They’re red and white.
CONSOLE = Roof rack controls, lightbar slideswitch, siren. That’s it. Grrrr…[/list]
- I’d like to say that this is the end of the story and that we drove off into the sunset with a perfectly good working Ecto ( minus some issues with the sniffer/guns and console rack. ) Unfortunately there were two weak points on the car we knew about and had no time to address. We were, after all, f’in swamped for the last 3 months and couldn’t get it ALL fixed. We need to repair/replace the steering linkage and the same goes for the carburetor. After 2.5 days of driving around the carb gave away and fuel came gushing out. No biggie, I mean we were just 2 miles from the storage place where this car will be hiding and had only left there a few minutes earlier. All we needed was a competent tow truck to bring us there.
(sigh)
I have pictures of the damage he caused. I have pictures indeed. I insisted that the driver from the tow company NOT use his fork-tail truck and instead call for a flatbed but he maintained that he knew what he was doing. He lifted the car and took off driving without strapping it down. He was almost to the storage place when he lost the car and it came off the forks, wrinkling the driver side fender and crushing the metal pieces that lead up to the frame. I’d love to post those here but since I’m about to enter possible litigation using these pics I suppose there’s a certain amount of restraint I should use in not going into detail at this time.
I’d like to crawl into bed for a week but as it stands, I need to return to work tomorrow. I also have until the end of this week to move into the new place. I haven’t even cleaned the garage yet let alone have it boxed up to move anywhere.


