Gday im having some trouble fitting all the lights from my crix kit into my aluminum thrower and stilling having enough room to fit a working tip. All the wires and light boards get in the road of the working tip. Any ideas that my work would be great. Im thinking of using a central locking motor from a car if I cant get the rod system to work. Also extending all the wires from the crix light kit and mounting the light board in the pack next to the crix sound board. Big job just to make the clear tip go in and out about an inch.
I have been working with a R2DEVO light kit, which includes a wand board meant to be installed in the wand. After fitting everything in, it became apparent that my barrel extension mechanism would not function either. I decided to move the board to the pack next to the pack board and sound card etc. I haven’t begun to disassemble it yet, but I did get myself some 28awg 16c ribbon cable to do the job. On his kit, this wire is used for the bar graph and the rest of the lights in the wand. The switches seem to be easy enough to reroute via a cat5 cable or 2.