hi can anyone give me some advice on spacers should they be used before fixing the motherboard to the alice pack if so what size ect iwould like this pack to be as accurate as poss thanks chris 
I used 1/2" spacers… readily available from any hardware store.
Somewhere there is a good diagram on how to properly attach a motherboard and pack frame together.
thanks any idea were i might find it thanks chris
A hardware store?
BTW. 1/2" is about 13mm for the spacer.
sorry didnt make myself clear i ment the diagram u mentioned
thanks that is great you have been a great help
Hey, do the spacers go on all three connection points? Or, 2 on the bottom, none on top? Or vice-versa?
ImIOn about to cross this bridge as well, but that pic is down, I can’t see it
2 on bottom, none on top.
Groovy. Got it, thanks!
thats not entirely accurate, there is a spacer on the top point at least on the gb1 packs, its half moon in shape and contours to the curve to the vertical bar
Click for bigger
Its two at the bottom and one at the top point, This is the GB2 setup. Same spacers at all points. I believe its one inch spacers not half inch.
Interesting.. But it does look pretty thin…
Is this set up visible in any of the reference pics (planet Hollywood..)