I took my Spirit my spirit trap apart to add some 3D printed mods, now when reassembling it, I cant seem to get the green lights to come on when the doors open. If I take the trap back apart the lights work fine, so it seems that when I install the handle, the toggle button/ post are pressing down slightly on the door triggers, which is causing the electronic switch that controls the green lights not to activate. So, long story short: is there a specific method to reinstalling the handle?
There is a white tiny part that goes in the trap handle before the long shaft the sits against the trap doors swing arms (the 2 back things that activate the sound and light contact) - But remember! The trap doors have to be open when you begin putting it back together when they butt up against the gears. Set the Button trigger and close them.
Thanks. I got everything back together and working alright, but I had to put a shim under the trap door electronic switch so that it would trigger when the doors open. Easy fix, but took a while to get there.