Hi. A few month ago, I tried the chips. Everything was fine. Now I have problems with the Crix’s gunlight chip. The big led on Vent + Switch plug doesn’t work. Before, no proble. What did I do to break the chip? Doesn’t semm physically broken. The big led work fine at another plug. A working led doesn’t not work if I put in the Vent + Switch plug.
There is a clu though. The orange light is on going from the bottom to the top and to from the top to the bottom. The frist 4 lights are always there.
Is it the batteries? (the battery is not at his max)
Is it physically broken? (doesn’t seem so)
Is it the electrostatic? (What should I do to avoid this?)
What is wierd is that it worked perfectly before, and now it’s broken.,..
Hi. I just want to know about a real curious mystery here. When I install everything, I put the power switch on. Do you know what’s happening? Here it is:
My lights are on but the sound is not the power on sound. It’s the shut off sound. Same thing with the black firing button.
It’s like in your car, you stop the engine by removing the keys with every lights shut down, but you hear the start engine exactly like when you start the engine with the key.
It’s the contrary and I can’t figure it out. I followed this diagram perfectly:
I used the link battery cable that I connect from the gunlight gun to the packlight gun. The polarity was perfect.
At the end, I put the black wire of the 9v battery in the negative hole of the gunlight card and finally the red wire of the 9v battery in the positive hole of the power cell of the gunlight.
As soon as the red wire touched the red wire of the link battery cable, a fire started. The big led of the gunlight lit up and burned and at the same time, the packlight chip burned also.
I noticed it when I put directly the 9v battery into the packlight and it hasn`t do nothing.
I want to know why it has happened so that I won`t do the same mistake again.
I had Crix’s light and gun kit. I burnt at the same time the big white led and the packlight card. I would like to know why so I wan’t do the mistake again.
Here how it happened:
It’s the link cable battery that I need to use only one 9v battery for the gun and pack light kit.
I put the wire (red and black) to the gunlight battery holes.
I put the other end of the wire (red and black) to the cell holes.
I put the red and black wire from the battery in the battery holes in the gunlight. (the same place I put the link cable battery.)
As soon as I make the last connection, which was the red one. There were fire. It burnt my big white led light and the pack light gun.
Without any more info I can only speculate that the black wire is coming from the hat light/red button on the gun ear and the gold wire is from the thrower bulb. What is it you are looking for with regards to the wiring? I’ll try to help but need more info
I heard once that in the movies, the motherboards and shell didn’t have the size to perfectly fit together. I don’t know if I’m right. It is just a matter of curiosity.