Our working MT500 Radios

These Motorola MT500 radios were our first purchase after deciding to build these costumes but we only finished them in time for their last outing.

We decided early on that they would be very handy to keep in contact at events however it was quickly apparent that being 25 years old and lacking crystals and chargers this would not be a worthwhile task. So we stripped them down and gave them a through clean after which we refitted them with modern pmr radios the PTT button works and volume control turns the speaker on and off.

The rest of the settings can be accessed simply by removing the battery cover. The pivot holsters were made by us from leather (our leather skills got alot better when we came to make the belt gizmos) and the plastic part was made on a CNC Mill and holds the radio tightly.

They work well and have a long battery life. It took a while to find radios small enough to be suitable and we had to do some detailed soldering on to the pads of some surface mounted components.

We had wired them to be charged with a drop in charger but we did not get time to build it so at the moment the batteries need to be removed to be recharged.

Cool stuff.

Where are people getting the accurate antennas?

That’s frickin fantastic.

Would you mind at all giving info/details on how you did the conversion? I have three radios that are in decent working condition, but I’ve been having a bitch of a time getting them to work at 100% capacity. It’s frustrating because I can get one of them to transmit to the other, but it won’t work the other way. I would prefer to use them with their original components, but lacking that, this option would at least be acceptable.

i would like to know what radio you used I see @ctive on the name but did a search for Active found nothing maybe need to look for it as its spelled on radio…

No crystal?

Mine I got from ebay is intact. It picks up the school bus drivers talking to dispatch.

Look in the for sale section,

I could find the crystals easy enough but then I did not know if our batteries were any good (which I doubt) or if we could charge them. Even after doing all that they may have been damaged and all the time and money would have gone to waste.

Those were the antennas that came with the radios when we purchased them. The @ctive radios were purchased from www.maplin.co.uk several years ago now and are better than a lot of the cheaper alternatives on the market today. I tried to find more information about the radios when I did the conversion but google fails to find anything about them, I could not even find them on ebay. I looked at a lot of the current radios for sale but for various reasons they would not fit inside.

The @ctive radios have had a corner of the case removed so they will fit. The microphone and speaker were de-soldered and relocated to the appropriate position in the MT500 case using some of the hardware gained when the MT500 was gutted. The surface mount PTT switch was removed and the PCB was wired to the PTT switch of the MT500 (you must be very good with a soldering iron to do this part) I also attached the drop in charger connections to the drop in charger connection of the MT500 but I never made the drop in charger as it is easy to get the @ctive radios out to charge the batteries in a normal charger.

We have sold all our proton packs now, so the radios are not of much use to us, (unless anyone knows of another 80’s iconic film they we used in) if anyone is interested in buying a set of 3 radios with the conversion already done then send me a PM.

Philip

Pm on it’s way

I had forgotton I still had these. PM me if you are interested in them.