How are you guys attaching this piece so that you’re still able to put it on your belt with the wheels sticking out? If I put that metal clip flush against the bottom, it will be almost impossible to put on my belt clip since the wheels and wheel stocks will block it. I thought about putting a spacer between the bottom of the trap and the metal piece, but then the clip will almost be or will be the same depth as the wheels, which means it will touch the ground and won’t allow me to wheel the trap out.
Ok, thanks. I guess I’ll just play around with it and use some longer screws with some nuts to space it out and hopefully not make it so it’s as low as my wheels.
What he said but you can put the spacers on either bracket just make sure the trap one doesn’t interfere with the wheels rolling. You just need to work at it a bit. This is another reason why I leave the holster strap long on one end in case you need to make adjustments.
Yeah, I got it to work after a few trial and error attempts. I actually had 2 sets of the V clips (one came with the trap kit the other was from irricanian’s trap holster I ordered) so I took one of the extra metal pieces and made it a buffer on the trap itself. It works just well enough so that I can slide the trap on my belt now (with a bit of effort, but hey, it works and fits snug), however the rear piece of metal on the under belly of the trap JUST sticks out past the rear wheels, so it drags a bit. I’m gonna get a metal file and just shave it down a bit, shouldn’t be too hard.