Quick question for those who have build both original and remake packs. Which one was easier? Also is there a parts list out there for the pack and thrower?
I love it! The things you’ve guys have been able to make already are absolutely amazing.
The classic pack is much easier to make in my opinion. Just because there is more information available on them, and because people sell either fiberglass or vacuumformed shells that you can buy. Even if you scratchbuild a classic pack, you know the exact measurements down to the millimeter due to Stefan’s plans.
The 2016 pack is made out of a bunch of project boxes, but you would have to scratchbuild the lower box, the unknown project boxes, the Faraday cage mesh, and the thrower. What makes this new pack harder in my opinion is not knowing the exact measurements, and the cost of all the materials. I think the studio purposefully made it so that you can’t mold and cast it, but that is just the conspiracy nut in me talking. ![]()
Here is a list of most of the parts which can be found on another thread (thanks to user AUSTIN for list):
-1/2’’ Copper Pipe x 6ft
-3/4’’ Copper Pipe x 4’’
-1/4’’ Copper Pipe x 2’’
-1/2’’ 45° Copper Elbow x 6
-1/2’’ 90° Copper Elbow x 3
-1/2’’ Copper Coupler x 4
-3/4’’ 90° Copper Elbow x 2
-1/4’’ 90° Copper Elbow x 4
-1/2’’ RUB Brass Ball Valve, P.N. T242D00 x 1
-Hammond Aluminum Project Enclosure, 2.3x2.17x1.02, P.N. 1550Q x 1
-Hammond Aluminum Project Enclosure, 4.4x2.3x1.6, P.N. 1590BS x 1
-Hammond Aluminum Project Enclosure, 3.5x1.38x1.02, P.N. 1550A x 1
-Rubber Boot for 2.5’’ Ashcroft DG25 Gauge, P.N. 471B190-01 x 1
-TE Connectivity Round Connector Cable Clamp, P.N. 206966-7 x 2
-TE Connectivity Round Connector Housing, P.N. 796094-2 x 2
-POINTER KNOB FOR 6MM SHAFT, 19MM DIAMETER x 1
-POINTER KNOB FOR 6MM SHAFT, BLUE FACE x 1
-0.9" KNOB FOR 6MM KNURLED SHAFT (BRONZE W/ DOT) x 2
Love these!! Great jobs and a few are absolutely fantastic. That one wand…amazing. I’d post my first attempt and then my current second work in progress but alas…not sure how.
Has anyone put together a Feig Proton Pack tutorial? I can’t wait to start my build!
Great stuff! What did you use for the black circles in the center? 3d printed?? Is anyone up for 3d printing a few of these for some of us here who don’t have a 3d printer? I’m slowly but surely piecing mine together, but that piece is a pain! Also, what did you use for your toolbox on the bottom? It looks great!!
A tutorial would be so great, but I haven’t found one yet. It sure would be helpful!
Any chance you could put together a tutorial for the wand?
Also looking forward to a tutorial. Would like to make one of these for myself this summer, but I have limited prop making experience so far.
Yeah, my friend 3d printed the center for me. I dont own a printer…I’m oldskool. As for the lid, I made that out of 1/2" MDF wood. I beveled the sides with a hand belt sander, and then I used rivets and a rivet gun to achieve that look. A few coats of primer, silver, and black followed by weathering it.
He could probably make a small fortune selling that piece… I know I’d pay! ![]()
The little box with the wires, to the left of the Gauge and Hammond… anyone have a size on that? I built one today but it feels too big…
What is everyone using as a frame?
Here is a more recent image of mine: I took it to a prop party. 
PattyTolen - for the box with the blue & red knobs, I used Hammond 1590B Aluminum (4.39L x 2.34W x 1.06 ), and had to chop it in 1/2 or so (I just eyeballed how much to cut off.)
buckrogers - I used a large piece of 1/4 inch acrylic. I used a jigsaw to cut out the shape. I then used a heat gun to give the bottom a 90 degree angle, and used it on the top to curl the two edges for the straps. Spraypaint it aluminum, no one’s the wiser.
Buckrogers, I used Dibond and basically made a large. However, you “might” be able to heat up dibond and bend it… It was just easier for me to make a little shelf. And once it’s got everything on it, you really can’t tell.
Looks great! I need to make a second tool box door… First one for some reason just doesn’t look right. And I need more bevel…
Just really hoping that by the time I get the back finished, somebody will be selling 3d panels for the wand box, haha. :love:
I am in the middle of making my reboot pack and let just say, hands down the legacy packs are the easiest. All the research has been done. You can find plans. You can buy kits. You have all the info and steps to make a decent pack at your finger tips.
Since the reboot pack has been shown, there has just been some vague numbers sent to us by Feig and only a few confirmed parts. The rest is math and just stepping back and seeing if it matches the few resources photos that we have at our disposal.
I can say this. I am having too much fun with building this reboot pack. It sorta brings me back to when I built my first pack, but I am having so much fun learning the “secrets” of the reboot pack. Let’s just hope that the movie doesn’t fail in the most worst way.

I agree…I think it’s the challenge of figuring things out that I enjoy the most. ![]()
Jason, how you doing on grips? Any updates??
I got super busy and have not had time to redo my molds…not sure if I’ll get them done for at least another week or so. ![]()
So what is everyone using for their mother boards. I’m torn, because I ordered one from Joe, but no signs of it, or him. But if I wait fornit, I won’t have a new pack for opening! Any good suggestions for a solid replacement? Do the know the proper size the motherboard is supposed to be?