Silicone for molds

I have a pack, ion arm, and cyclotron bumper shell, and I want to make a mold of them to cast 2 extra packs for friends. Can anyone tell me the best mold making silicone, and how much I would need. I know with the allumilite they come in 3 sizes; 2lbs, 10lbs, and 44lbs. I am guessing I would need the 10lbs tub of silicone, but I want to be sure before I purchase it. If anyone could link me what they used that’d be even better.

Well I certainly hope you made them or else it’s very taboo to recast them…

To cast the whole pack and misc parts you are going to need at least the 5 gallon size (44lbs) and you are also going to need additional supplies (fiberglass) to create a mold jacket for the larger parts like the pack…

Alumilite silicone (45A) is fine but it’s a little stiffer then some of the others and might cause some issues… If you go with Alumilite I would get their Dow Corning HS II (20A)… Smooth On has several different flavors I would suggest Mold Max 30 for pack molds…

For smaller pieces and pieces without undercuts you can go for the harder silicones in the 40A+ range…

dude I dont see where your going to save money.. buy 2 more packs and be done with it.. people that make there own pack and want to recoup some of the cost make a mold and then sell some to get there money back..

And if you havent done it before.. and you messup.. well thats even more money down the tubes..

Not to mention recasting someone elses pack .. well its kinda frowned on.. even though I understand its not exactly for resell..

I know there is a seller on ebay that sells packshells for $200 each

your also not including the materials To CAST the packs and parts.. thats even more money..or if you do the packs outta fiberglass theres more money and learning how to do fiberglass..

I am sure someone around here can probably break it down further .. For 2 packs I just dont see the savings with the amount of pain it will be ..

anyway..good luck..whatever you decide.

It’s about $1000 give or take to make decent molds and get a few castings from them…

Certainly not profitable until you reach say 7+ castings or so…

Why so much Exoray. I have already built the pack frame, the ion arm and bumper I purchased off ebay. I really just want to cast my pack so I don’t have we don’t have to pay $600 for 3 more pack frames off ebay. If I buy the 44lbs silicone, (Do I really need that much to make the mold) besides some fiberglass for the casing what else do I need to purchase for a mold? At least once I make the mold I can sell a couple of pack frames or hell the mold itself and recoup some cost :sigh:

Because that is what it cost…

Well right there are you saying you purchased someone elses kit and want to recast it? If that is the case you will earn yourself a ban from most message forums and will be black listed by almost everyone…

If you didn’t build the parts from scratch (raw materials not a kit) then you have no moral rights to cast it, in short if it isn’t your work don’t mold/cast it…

It’s cheaper and morally correct to just buy them… See above recasting someone else’s work is like murder in this hobby…

Yes, you will use the most of that to create the molds, but since it appears you just want to recast someone else’s work, I am no longer going to elaborate on the process…

Not if you are recasting some else’s work…

Let me rephrase. The Ion arm, and bumper are not mine, and I have no issue purchasing another 2 off e-bay. I found it to be cheaper to take materials from around my dad’s workshop, and make a Pack frame, which looks like garbage do to the fact that its wood metal plastic and everything else, as well as being extremely heavy. I want to cast said pack frame ( I did use norm’s plans… hopefully that isn’t taboo) So it is lighter and looks better. So in order to do this it is going to need 44lbs of silicone, plus fiberglass correct? Or is there a cheaper way. I know the allumilite resin is expensive but it’s also extremely good. I am only asking about the silicone or what ever to cast a mold of MY pack frame, not someone else’s frame, and not the Ion arm or bumper I purchased. Geez you guys are touchy. :eyeroll:

Get used to the touchiness, people are protective of their own work because (having build a pack yourself) it takes a bunch of time and people are also protective of others they’ve become friends with. I do have to agree though, it’ll be really expensive to cast and fiberglass a pack if you don’t know what you’re doing. The people that have responded to your post aren’t trying to discourage you from casting and making multiples of your work, they’re just letting you know it’s going to be both expensive and difficult.

I’d suggest a community college course on autobody work for the fiberglassing experience. It’ll save a bunch in the long run, plus you’ll be getting valuable experience in other skills necessary in prop building; working with a filler like bondo, proper painting methods, minor welding (MIG most likely), sanding, etc.

-Tyler

thank you. I appreciate that. So I don’t get the reason for the fiberglass shell. When you make a mold of something small you just use silicone, or latex. Why do you have to encase the mold in fiberglass for a pack

When you do something small you don’t have to worry (so much) about the mold warping. The larger the item, the more silicone you’re using, the heavier it’s going to be the need to have it reinforced somehow is increased. At least I think, I haven’t done any large molding myself so all of this is half-remembered pieces of articles and posts dating back years.

If you want a good example of stuff where the mold was warped check out http://www.newmoonprops.com their stuff is supposed to be horrible. From recasts to warped pieces to bubbles in the resin to badly mixed resin… everything you don’t want to do is found there.

-Tyler

Ditto on molding being expensive. I messed up (like a lot of people do) the first few times in doing a fiberglass pull, but in the end it is worth it. To me anyways.