vacuum forming.

I am going to attempt to use this method to build some GB props. I have never done this before. But I am familiar now with how it works in theory. Does anyone have any videos and a step by step process? I would like to watch it to make sure I understand it. Also is there a site that sells the sheets? I found a few, but I didn’t know if there is a site that is preferred.

-Thanks in advance!

Darryl

Unless you’re either A: planning on making quite a few copies of an item or B: wanting to learn out to vaccumeform with the products being secondary it’s not worth your time and money to vacc your own parts.

That said check out tk560’s for some good info. Building the table info here: www.TK560.com: Vacuform Table IV, the video series seems to be missing but you can probably find it if you dig through their forums: http://www.tk560.com/phpBB2/viewforum.php?f=1

I had to rebuild a proton pack that a friend got in the mail. While it visually looks great… It has fallen apart several times.

But being that we are all Ghostbuster nuts… I have about 5 other friends, not including myself that want to make them. Plus many other items. I also have a 1981 DeLorean, which I want to make temp props for Halloween. Once the restoration is finished on the DeLorean, plus the engine upgrade… I will be looking for a caddy. Its not a question of wanting a close to perfect Ecto, it is now a need. As you can see, I have little care for cost lol. And being broke doesn’t stop that. I have a pretty good list of materials, but the sheets… I’m not sure what thickness, and size I should go after. I’m not going to make one large mold. Rather do it in sections. So I guess the largest part will be the bottom half of the pack. The cyclotron assembly.

Thanks-

Darryl

You’ll want either .125 if you have a high-vac setup or .08 if you just have a shop-vac system. Anything thinner than that won’t be strong enough and anything thicker than .125 won’t pick up the detail well.

You can check my posts here in this forum for the D-42 shells I made a few months back.

Sorry it took so long to get back. Work has been busy.

No the plastic sheets themselves, do you guys go to a certain website? In other words is there a preferred site?

The preferred source is whatever’s closest to you. I found a local plastic supplier that I can go to and not pay shipping costs.

That will be fun. I don’t know who locally would have that. In the mean time are there any websites to use?

Go to Google and look up plastic supply places in your area, I have one close to me called Regal Plastics. You can also try sign shops as well, they might have something.

Plastic is hard to find. At least good plastic. If you have a good 30hg vacuum pump and large storage tank that can hold 22+ during a pull for at least 10-15 seconds then you can use .093" possibly .125" but I haven’t tried that much. If you’re using a shop vac or similar you’re going to struggle getting good pulls with anything over .060"

The hard part is everywhere stocks white and black haircell one side plastic. This is used for many industrial processes from subway car seats to airplane overhead compartments. What it doesn’t do well is glossy smooth finishes. So far i’ve been very happy with how it turns out backpacks, but they do need to be painted.

If you want to get smooth/smooth .093 it’s special order minimum usually 1000lbs and about $2-3000 worth at one time.

[quote=“D-42”]

Maybe I’m just lucky to have a good supplier nearby but I’ve never found this to be the case. In fact I have a hard time finding he haircell. I usually buy HIPS though so it may be different for ABS. :whatever:

Yes HIPS is easy to get, but IMO far inferior to ABS. HIPS is easier to vacuumform though. The parts are much more brittle and crack easier. ABS is used to make car bumpers and dent resistant car doors. It holds up really well as a backpack. I can actually stand on the shells I’ve been making.

HIPS stands for High Impact Polystyrene. I don’t know why this idea that HIPS was brittle perpetuates throughout the 501st but it has for years and I hate it. The only reason people in the 501st have had issues with styrene is because recasters make ■■■■ copies of things with low vac systems and too-thin plastic. If you use a proper thickness there are no cracking or brittleness issues with HIPS.

I have made ghost busters shells using both HIPS and ABS only the HIPS cracks. Almost every time. I had to give it up.

Sent from my DROIDX using Tapatalk

I tired a few places today. No luck finding it local. A sign shop gave me a number to a place in New Jersey. They said I can have an order shipped there.

I’m going to see what I can find on the internet. Any suggestions?

Thanks again for all responses and advice!

-Darryl

Where are you located?

Swoyersville, right outside of Wilkes-Barre PA.

A few places that I tried to call wouldn’t pick up. Could be because its after christmas. The art stores I went to plus the sign place all said they didn’t know of anyone local.

Dude, if you were in PA you should have said so. I’m in Norristown. I use Northeast Plastic, they have a warehouse on Rt1 or a retail store on 2nd street in center city Philly.

http://www.northeastplastic.net/

There’s another place in Pottstown but I haven’t used them.

Hey that’s great thanks. I’m not very far from Pottstown.

I’m heading out tomorrow to pick up some parts to build the equipment. I found the shop vac, its a 6hp.

The basement needs to be organized, so that is number one.

Thanks again!

Darryl