*A Screen Accurate Belt Gizmo*

**As I am beginning my first builds/round/Run of Belt Gizmos **(Belt Gizmo Link) **I continued my research to make sure they are as accurate as I can make them.

**

Now I’m not 100% sure no one has pointed this out before but all the threads I came across never mentioned it. **So, I guess I may be the first to say that I believe that all the Belt Gizmos made up to this point may be inaccurate. ****I know this sounds crazy but I am going off a HD picture I came across which I consider to be the best picture of the belt gizmos. **

Here is the LINK to the same picture but this link will allow you to zoom in closer to the Gizmos.

**Here is the picture: **(Hope it’s okay to post it in its true size. If not I could turn it to a thumbnail I just want to make sure the details I speak of are visible.)

*From this picture you are able to see that there are actually 11 Nixie Tubes, not 8.

**There is also 9 capacitors, not 8.

Below are images and postings showing that The Belt Gizmo looks another/different way. I have taken them from other post, if the post or image belongs to you and would like it to be taken down please let me know and I will do so with no hesitation.:

Image Belong to: “Martog”

I don’t know who the image below belong to know, if anyone does please let me know so that I am able to give them the respect deserved for it.

**What I’m wondering is: “If I plan to make my belt gizmos and I want to be screen accurate which design should I go after?” Since you can clearly see in the picture that the number of nixies and capacitors is different than perceived before.

If this has been discussed before please guide me in the right direction and I do apologize in advance if I’m posting something that has already been discussed and answered before.**

Thanks!!

Wow that is a good find. The real question now is, what model calculator is that board from, if its not a ICC-808D?

The Belt Gizmo that Ray is wearing on the movie poster (below) still has 8 nixie tubes + the letter box.

I did notice some time ago that the Belt Gizmos in the above photo do in fact have 11 nixie tubes (as well as the letter box), but they only have 8 capacitors. It’s possible that the prop department threw some extra nixies on there at the last minute to “busy” up the circuit board, but such a minute detail would never show up on film (only the high-resolution production stills). Besides, most ICC calculators from the early 70s seldom had over 10 nixie tubes.

Of course, if one is concerned with screen-accuracy, then it is perfectly acceptable to put 11 nixies on their circuit. Personally, I think that 11 tubes makes it look a bit cluttered.

:sigh:

We’ve known about that picture and the variant circuit pouches for a while. They look like stunt builds to me. Nearly every other clear shot shows them in the standard configuration.

Jairus would you happen to have any of the other screen shots that show the standard configuration, do you know if there are any other shots that show the circuit board with 11 nixie tubes or is this the only one?

I may search myself but if you don’t mind I’d really appreciate it.

This is the type of response I was looking for. I want to know what members prefer. 11 nixies does seem like a bit much but if we can find other pictures were the gizmos have 11 nixies apart from the one above it may be helpful.

Basically, keep in mind these scenes were shot in LA. These things got beat to hell in filming, there are pictures from when they were outside 55 CPW and there are red alligator clips on the board.

What I’m saying is, they change a bit from scene to scene, depending on how bad they fell apart. Unlike us, they weren’t careful with this stuff. Heck, look how bad a pack looks now compared to a pack someone built 10 years ago and took care of.

Well since the hotel scene (which is where the picture in my first post is from) is the first time they use their equipment and in the picture the belt gizmo shows 11 tubes then could it be that as filming continued they possibly lost a few and so we end up seeing 8 or 9 at times?

Here are a few more pics showing that there is 11 nixies in the hotel scene (remember to open in a new window & enlarge the pictures):

(Pictures were borrowed from a Ghostguy posting)

image

image

image

image

The following pictures I found while doing my research, take a look and let me know what you think:(remember to open in a new window & enlarge the pictures):

[spoiler]In this picture you can see there are at least 10 nixies on Ray’s gizmo possibly 11.

Here you can clearly see 10 tubes on Ernie’s gizmo.

In this picture both Egon and Ray have more than 8 tubes on there gizmo, I’m saying 12.

It’s easy to see here that Ray has 10 Nixies on his gizmo.

Even in this picture from Ghostbusters 2 you can see that Egon has more than 8 nixies, looks like 10 to me.

image[/spoiler]

****From what I’ve seen the only time we see the belt gizmo with 8 nixies is in the movie poster jairus showed us.

I believe most ICC calculators from the early 70s seldom had over 10 nixie tubes as well, but I also believe that the Ghostbusters weren’t using them as calculators so they possibly added nixies or something. Since the the pictures above show that 10 nixies on the gizmo show up throughout the movie.

**Then again I can always be wrong. :walterpeck:

Ok, now correct me if I’m wrong, but the first scenes they shot were in New York, then they moved the production to LA. So I’m not sure they would have lost the nixies.

In my opnion, they had a metric butt ton of old calculators, torn them open, and stuck them inside a tiny leather pouch. Not that they didn’t notice it, but I’m sure they figured no one would be looking this hard at them, so they could get away with switching between models.

This is correct, it was my impression that they lost parts to the things during filming/ in transit and used backups.

Oh, and the GB2 board doesn’t even use nixies.

Personally I think the 11 tube circuits are stunt versions. They don’t look like regular Nixies, they’ve got a white internal backing which makes me thing they’re just clear tubes with paper or something in them. It’s been pointed out to me that everything else they’re wearing is hero gear though so dunno how that works. Maybe they were having problems with parts breaking off the belt circuit due to it’s location on the body so they changed to a stunt version?

The GB2 boards simply appear to have colored plastic tubes meant to simulate nixies; this would be sturdier then using glass tubes (thus doubling as stunt belts) and adds a bit of color to the device.

On a side note, it seems that the belt gizmos in the video game have 9 nixie tubes (possibly 8 + an uncovered letter box, which would normally be a green nixie).

Okay, time for Matt’s theory!

The first scenes shot for Ghostbusters were on location in New York City for 2 weeks at the beginning of production. This is when all the exterior shots of them in full gear wear shot (random locations for the montage and crowd shots outside of 55 Central Park West). Now outside of 55 CPW, when the earthquake happens, that was done on a sound stage in LA, so it is possible there are shots of the guys in front of “55 CPW” with more then 8 nixies on their belts. As noted, the shots of them outside of 55 CPW (before and after the earthquake) has their belt gizmos falling apart, being held together with red alligator clamps. All these shots have them with, what seems to be real ICC-808D boards on them, with the 8 nixies and letter box.

Then production moved back to LA. This is when the sedgwick hotel scenes (both at the Biltmore Hotel and a sound stage for the 12th floor shots), and the roof top scenes were shot. All these scenes, the belt gizmos seem to have more then 8 nixies. So I’m going to make the assumption that the original ones fell apart in NYC and had to be repaired/replaced for the rest of shooting.

That’s how it seems to be for me atleast.

I second Matt’s theory! :cool:

I think that we should just content ourselves with putting anywhere from 8-11 nixie tubes on our belt gizmos and call it a day (let’s hope this doesn’t become the new khaki vs. grey debate).

That belt gizmo is KHAKI!

Good to know!!.. My mistake.

I agree!!

Demon’s got it mostly right on the GB2 nixies, they are plastic tubes . . but transparent. The coloring is actually ribbon cable that runs from the board to the tubes. You really got to look at HQ stuff like movie sized posters and the HD copy of GB2 to tell it, but it’s there.

I know it’s not a big picture, but you can kind of see what the belt gizmos in GB2 looked like here:

Which is from this reference gallery.

Looks like 8 plastic tubes with rainbow ribbon cable in them, to me.

They sure loved that rainbow cable in GB2. :eyeroll:

Some had as many as 12 in GB2. I can confirm that :stuck_out_tongue:

Here’s a closer look; it certainly is just rainbow ribbon cable stuffed in the tubes. Although I still prefer the GB1 belt gizmos, I can see how these would not be as prone to breaking. If you notice in the second film, none of their belt gizmos are broken, falling out of the pouch, or jury-rigged together.