Attaching wire to the SMC straights/L-fittings

Okay, so the pack’s almost finished. I purchased the SMC straights and L-fittings (with the orange plastic tip) and the plastic wire I’m using is too big to connect.

Any tips (or pictures) to attach the wire to the SMC would be appreciated. Thanks!

Get yourself some 5/32 hose! It’s for sale here in the shop!

IIRC you push the plastic thingie and put the wire in place. Once you release it, it’ll be secured. Same with the elbows.

For the elbow connector that goes from the Ion arm to the resistor I used a smaller diameter cable. I then cut a piece of the thicker cable and slipped it over.