Doors+lights working,+smoking, Ghost Trap for Fan Film HELP

Hey people, im new here.

I want to build a Ghost Trap, and im a bit fuzzy on the whole thing.

Basicly i dont have a clue where to start, what to use for the body etc…

Also, doors have to open, lights have to work and it needs to smoke. (its for a fan film)

Cant be too expensive, im 15, but it has to look the real deal, i’ve already checked out the shop here, it seems everything is priced reasonably low enough for me.

But i dont know where to start!

( i realise there have been more than one in a shot, i’ll make more once this is finnished, but without lights, opening doors and smoke, which this one needs!)

Please people, any help?

EDIT: Smoke thing needs to be re-usable and a part has to slide out to work with the containment unit.

You are gonna need to make at least 2 probably 3. A smoker, some sort of a hero trap and that will be a bitch to do while still allowing the cartridge to come out. Maybe you could make the smoker cartridge come out.

The best place to start is with the trap’s body. If you want smoke, lights, etc., it will obviously need to be hollow, so building it out of thin wood would be the best option. Venkman71’s plans in the Ghost Trap section of this site are excellent and are geared towards building a trap with a working toggle switch and blinking LED, so that’s got your electronics covered. As for a trap with opening doors, somebody sells/used to sell them online. I can’t remember the site, but Googling “ghost trap servo” would be a good start. They’re quite pricey, however.

gbfreak2021 is absolutely right in saying you’ll probably need to build at least 2 traps to get all the features you’re wanting. A trap with working electronics and opening doors is do-able, but having all that and smoke is just too much for one trap. Starting again with a wooden trap and cartridge, I would suggest using smoke bombs or dry ice to get the desired effect. Put an aluminum soda can with the top cut off inside the trap cartridge and place your dry ice or smoke bombs inside the can, then stick the cartridge back into the main trap body.

Hopefully this will get you started in the right direction.

Thanks