GBTVG Inspired Pack WIP

I love all of the little extra widgets and goodies of the video game proton pack but I don’t really like the way it looks too cluttered and chaotic. As such, I’m planning on building a pack that incorporates some of the video game aspects (and maybe a few of my own) while still retaining as much of the lines of a classic proton pack.

I decided to start on the PPD/EDA area and work my way out from there. The two little jutting nubs that come out when you turn on the Meson Collider seemed to be a good place to start. I already have ideas for a Mk.II version that is more efficient but for now, this roughly does what I want it to based off of the materials I had available to me. I’ve never used a micro controller or servo’s before so it is a lot of new territory for me. My coding is atrocious and it doesn’t 100% do what I want it to yet. Got to fine tune it. But right now it gives the general idea.

Video at the bottom.

![image](http://www.gbfans.com/images/pb/Tafumi/Proton Pack Stuff_Upper Assembly_IMG_0520.jpg)

![image](http://www.gbfans.com/images/pb/Tafumi/Proton Pack Stuff_Upper Assembly_IMG_0519.jpg)

![image](http://www.gbfans.com/images/pb/Tafumi/Proton Pack Stuff_Upper Assembly_IMG_0518.jpg)

![image](http://www.gbfans.com/images/pb/Tafumi/Proton Pack Stuff_Upper Assembly_IMG_0517.jpg)

![image](http://www.gbfans.com/images/pb/Tafumi/Proton Pack Stuff_Upper Assembly_IMG_0516.jpg)

Still have a lot of work to do.

PS: For those wondering, I bought the desk at Office Depot for about $89. No idea if they still carry it. It also glows green, red, and has an auto cycle that goes through more colors. A small writing desk. I like it. Just a small writing desk that I build stuff on.

That is really spiff! Can’t wait to see what else you come up with!

You an me, we should talk. I started on that effect for my pack but I can’t figure out any way to make it move, let alone as awesome as yours.

I will most certainly be watching your progress!

Wow! Now thats cool!

Thanks. It’s actually silly how simple the movement mechanism is. I spent the past month or so trying to figure out how to get it to move and ended up with a pile of failed prototypes. Mostly in the realm of scissor arms and cable pulley systems. I was seriously over thinking it.

The pictures really do all the explaining that is necessary. The only thing I don’t really show too well is how the servo interfaces with the moving parts. A few more images. If you need any additional information, please let me know.

![image](http://www.gbfans.com/images/pb/Tafumi/Proton Pack Stuff_Upper Assembly_IMG_0528.jpg)

![image](http://www.gbfans.com/images/pb/Tafumi/Proton Pack Stuff_Upper Assembly_IMG_0527.jpg)

I should have done better chronicling of the build process. Will probably do that for future parts.

awesome

Yes. .It was only a matter of time . . Really outstanding . . Good job. .

Awesome so far. Been looking into servos for a pack project. :slight_smile:

I’m really looking forward to seeing the progress and finished product. Good Luck with it.

Much appreciated.

Wrapped up some work on the PPD’s exterior. Nothing worth throwing a picture up. I figure we all know what a PPD looks like. Started on the EDA side of the house now. Got an idea on how to make an extendable/retractable slime tube in the Booster.

Absolutely no idea how it is going to translate to real world physics yet. More thrilled with the prospect of figuring out how to make it work than building the pack itself. Will probably be a day or two before I have anything worth taking a picutre of. Also got to keep an eye on this Tropical Storm/Hurricane. See what it does.

Thanks again for all of the support.

Bah. Seems my idea did not translate well into the real world. I would need a much higher torque servo to get it to work and even then, it would be unstable and unreliable. Might look into actuators in the future but I do not think I can get both the PPD and Slime Tube mechanics to fit in the same body at the same time.

Oh well. Going to move on to the Battery Pack. I have a really solid idea for making the ribs fan out for the Stasis Stream. For now, all I have is this

![image](http://www.gbfans.com/images/pb/Tafumi/Proton Pack Stuff_Upper Assembly_IMG_0530.jpg)

Not much of an update for the amount of time it took.

i wish there was an update for this.