Now granted I’ve not been on the forum for long…but I don’t think I’ve seen a single build thread where the gun was made WITHOUT pre-fabricated, parts (like the resin bodies that are for sale, etc). Has anyone out there actually completed a gun without using or ordering pre-fab parts? I’d like to go in that direction, but I’m getting a little discouraged due to the number of people using pre-fab stuff.
I know I have seen wood, foam board and even cardboard gun builds not using all cast parts. Not that there’s anything wrong with them! MMM’s and throwing chickens resin parts look top notch, and would use them in the future.
I’m sure someone has but in my opinion, the simple truth is that for the gun/wand- the pre-fab parts are well worth the money. A fabulous product at a fair price. I will be using a few pre-fabricated parts (Mainly the gunbox and the cyclotron) because I think they are better than I could do myself and I don’t mind paying the price.
I’ve seen alot of people make their gunbox from scratch and get fantastic results.
I did, check out my hot pics in my profile section. made everything from scratch using everyday household items like aluminum foil and floss and muffin tops. but seriously, please check out my pack.
So what’s a clever DIY method for creating the heatsink that goes on the side of the wand? This, at face value, seems like it would be the trickiest piece to make, and it remain sturdy.
Oh yeah people do it all of the time. I’ve scratch built… to make my bucks, but unless my gun was scratch built out of 1/2 plywood or MDF I wouldn’t use it for anything but display, because just too many bad things can happen to something that so much work has gone into.
I made one out of styrene plastic (went to the hardware store and bought “warning signs”). I followed Norm’s Y2K plans (lots of scratch built ideas there). You just draw out the pattern on the plastic, score with a blade on the lines you’ve drawn on, and you can easily just bend-and-snap it apart.
The trickiest part would be cutting the “grill” out on the top. I would suggest a dremel if you want it to look good. Same goes for the holes you have to make for the toggle switches/buttons.
It was VERY easy to make (trust me I was intimidated when I started to build it) and I will probably go down the same route for this Halloween (this year was supposed to be my first year to make an accurate pack from pre-fab. parts, but with how things are going I just can’t afford it).
about 4 years ago I made one out of steel from scratch. Does that count?
The pack ended up in a scrapyard (It was heavy…engine block heavy!) and the gun ended up in my parts bin. I’d like to do another one in the future, as it was a fun build! The one I did back in the day had it’s inacuracy’s, but If I find the chance to do another one, I plan to remedy them somewhat! A halloween ago, I cut the trigger box off it and grafted it onto a real ghostbusters “Farmered” pack. Surprisingly, a pack built from 18 gauge steel isn’t heavy at all!
I’d like to do another movie pack in the future, I just don’t know when that will be!
I have a couple of pics in my props section of my profile, used MDF on my first gun then made a mould out of thicker pieces of MDF and vacuum formed 3 more. Not %100 accurate but good enough for me.
Just adding my two cents as a new guy. I just started my proton pack and my plan is to use NO prefab parts for any of it. Nothing against anyone using or offering up ready made parts, I just am trying to hold myself to the goal of entirely scratch-building my rig.
Now of course I’m not going to scratch build the ribbon cable or the ALICE pack or stuff like that, but I will be making pieces like the Clippard valves and elbows and those sorts of details from scratch, including all of the gun as well.
Again, I don’t think this is a BETTER way to make a pack, on the contrary, it’s just going to make more work for me which I could avoid. But for some reason, right or wrong, I really want to MAKE this thing, not just assemble it from pre-made parts.
Let me just say again, I don’t want to offend anyone or sound like I’m so great that I can build this thing without any help from anyone or using anyone else’s parts. This is just something I feel like I really want to try to do FROM SCRATCH. It might end in disaster, because in truth I don’t even know if I CAN make all the parts myself. But to me on this one the challenge is what’s important. Plus, I have a TON of MDF and wood and plastic and cable and wire loom kicking around my workshop and a pretty decent collection of tools so I figured hey, why not try to put some of that junk to good use?
And, just to make things harder, I plan to build my own vacu-forming rig and form my own shells, which I have never done before. SO THIS MAY BE TOTAL MADNESS ON MY PART. But I am eager to really give it my best effort.
i’m painstakingly cutting and glueing each piece for each box from 1/8"plexiglass purchased at lowes. its sturdy as hell but slow going. been working on it since '03 little at a time. as soon as my camera is repaired, i’ll post pics.
actually, i lied a little. i purchased the bumper from this site last year. its a tight fit but with a little shady engineering should work.
and my cyclotron is from a cheap 9 1/2" frying pan. the roundness from the wall to the base was perfect.
I havent actually done this, but its in my head for the next scratch build. the curve of the gun box is probably the hardest to duplicate without pre-fab. i was thinking that it may be possible to use the plastic from a “for sale” sign and curve it around a 1/2 inch piece of PVC thats attatched to the frame of your gun box. kinda hard to explain.
The way I did it was to start with a square edge (1/8" MDF) and sand the crap out of it with an electric sander til it was curved, then use bondo to smooth out the joins. Worked pretty good, and a decent result.