HasLab has dropped a new item: 1984 style Plasma Series wand:
https://hasbropulse.com/products/ghostbusters-plasma-series-neutrona-wand-1984
AVAILABLE NOW!
Just saw that Hasbro released a 1984 version of the wand! https://hasbropulse.com/products/ghostbusters-plasma-series-neutrona-wand-1984?utm_source=Mu2gHB&utm_medium=email&utm_campaign=02012024_MVL%20XMEN%20GHB%201984%20NEUTRONA%20WAND%20Drop%20(01HNHM9QS3VYCR24AFGMEGBNW3)
Not sure if this has been posted yet, but it’s my first time seeing it
Is that a joke? You can see the wood area where the afterlife stuff has been stripped off from their previous release. Pretty sure you can see the wooden grip on the other side.
Actually I think it’s a paint app…meant to look worn. Since my afterlife wand is shot this was a pleasant surprise. Nabbed one this morning.
Yeah that came out of nowhere. Pretty low effort release, they didnt remove the rubber wire near the base of the front grip. Also has the same rough texture as the original.
Yeah, they should’ve waited for the movie to release, then release the wand with some swappable parts to either be an 84 or Frozen Empire wand.
Hope they at least fixed the issue with the wire cutting when extending/collapsing the barrel.
I mean, my afterlife wand died due to the connector messing with the connector springs I was pretty happy to see this. I mean, a nice second chance for people to grab one of these and not have to modify it too much seems like a good move. Better than nothing.
You can see the effect on the stand but I get Richardless point on this . It does give the appeaarence they just tore of the wood grip. With a little outside the box thinking you can either paint over it with black, or if one were feeling more creative use the texture to create a slime effect. The stand you could easily get away with doing a pink slime texture, maybe a green for the rifle.
WUT
sssoooooooooo can we perhaps expect an '84 pack eventually?
They should’ve released this before I broke my first one & bought another lol!
Surprised it’s not the FE version to tie into that.
The video mentions that they updated the wiring for the second version of the Spengler Wand (of which was ported over to the 1984 wand). Any idea what that update actually was?
they added heatshrink sheath covering the barrel led wires.
I would almost expect the FE gear to be part of an upcoming backing campaign. They know the wand will sell out so I’m guessing that’s why they just put it out as regular merchandise. If they decide to do an 84 pack without a backing campaign it’s going to be a shit show. Meaning scalpers will get to it before any of us.
The 84 pack will more then likely have the copper parts, yellow wiring cover, and any afterlife add ons removed. I’d be surprised if they keep the sped up cyclotron lights and sounds.A price tag of $400 and up will be more likely for the 84 pack.
So it still has the issue of the wire snapping if you extend the barrel?
Really wish they’d fix that hat light button thing.
I am hoping (like the rest of us mostly) that we get a slightly early release of “Two In The Box!”.
I ordered multiple items of all the Hasbro/Haslab items that came before. But with this I’m not convinced 
Grips are too thin. Due to the barrel tube diameter. I think the best thing is to get the Spengler wand and buy 3D printed '84 grips off Etsy. That way the grips looks more beefy and accurate.
Orange barrel tip shines through the inside of the plexiglass (no matter if you paint the outside silver or not). Also you see the battery door safety screw protrusion sticking out of the rear grip in the first image below. Though that isn’t Hasbro’s fault, just a legal requisite.
If there had been any new functionality I would have gotten a couple though. But as it is it will be a pass 
30 second shut off was an easy fix, as was settling the bargraph on the lowest decal with just the bar graph light activated and not the cylotron. Red paint on the button on the barrel is applied over the housing (should just be the button).
Such simple things to get right really Come on Hasbro.
But if you don’t wanna spend a few dollars on Etsy, this is a great alternative if you want an 1984 wand.
Though my advice would be to get a Spengler wand (even the V1’s are still for sale!) and just get Etsy grips. Those Etsy grips are really mature now as they’ve gone through many iterations.
Check the first two images… how thin the grips look, they almost look as thin as 80% Spirit pack wands. If you get chunkier 3D printed grips they wil hide that inaccurate barrel tube diameter because they cloak it (the 3D prints just snap over the existing Hasbro grips).
This is a comparison of the screen used and the Hasbro Spengler. You notice the barrel and grips are less beefy on the Hasbro. As are the dimensions of several parts. But Etsy 3D printed grips fix that problem entirely, because they snap over the existing Hasbro grips.
Here are pics of my Spenglers made to look like 1984’s with just simple 3D grips bought off Etsy for a few dollars.
But this is all just my opinion
Off topic but since it was brought up, I just gotta say.
Honestly, as negative as I often am about the direction of the GB brand I gotta say Hasbro has been killing it. That pack was worth every penny, they actually listen to fans, and make the things we would’ve killed to have as kids.
Strapping on a proton pack was a life’s dream for me & as often as I wish I was 12 years old again, for a few short minutes when putting that beauty on? I WAS 12 again.
If only Hasbro made automobiles. Put a Haslab campaign on for an Ecto 1 lol.
Honestly I’m relieved, I saw this and heard my wallet start to weep. Not interested in just a pallet swap