Hasbro's Ghostbusters Plasma Series Spengler's Neutrona Wand

Does anyone plan on replacing the grips? Especially the rear grip covered in rubber ‘duct tape’?

Same goes for the bent trigger on the end of the barrel. How easy would it be to replace any other parts?

Pics and ideas would be grateful. I should have mine in-hand sometime next week.

I already plan on painting over the semi-glossy black parts with flat black paint to make it less shiny looking. :slight_smile:

I don’t plan on replacing the front grip because I quite like it. But out of curiosity, I’ve modelled something to go over it with my 3D printer. It still has another hour and a half to go and it’s only a v1.0 prototype but it’ll be interesting to see if it works ok at least in theory. I’m a real novice when it comes to 3d printing.

I’ve got no plans to remove the rubber “tape” from the back of mine but I know others that don’t like it. I was hoping that it would be clean underneath but in the latest video from Ghostbusters News he reckons he can see a gap underneath when he lifts his (mine seems too tight on to look) so I’d wait for confirmation before trying to remove yours.

My wife is planning to wrap the back and front of hers with pink cotton fabric.

Another friend of mine is just going to paint the shotgun grip black.

The bent front bit is a soft rubbery plastic that’s all one piece glued onto the end of the barrel. It probably is replaceable with some hard work but you could just cut it and straighten it with some epoxy resin the join would be hidden by the fake welds.

As you can see at 13:28, Jason shows the underneath of the screen-used prop and it clearly shows a Dixie cup hook just like on the Hasbro Plasma Series Spengler’s Neutrona Wand.

So I guess the Dixie Cup Hook is screen-accurate after all. :walterpeck:

First attempt at some sort of grip cover. 3D printed. Slightly taller than the standard grip but that’s due to 3d printing limitations. It would of course need filler on the existing grip and the join seam (and painting of course) but I think with some more length tweaks this could work quite well for those who really want the classic GB1/2 look instead of the Afterlife grip.

Damn, that was quick. First mods before most even shipped. :slight_smile:

Sorry it took so long, had to pick up my daughter from nursery :joy:

If you planning to permanently modify the front grip it seems fairly straight forward to just cut it off and epoxy a printed one. It would probably be easier than gluing extra mass on and filling it.

The issue is the rear grip. That one looks very difficult to replace and look clean.

Unfortunately it’s not as easy to cut off as you suggest, at least not without extensive reworking and rebuilding of parts.

I assume this decision was to make it easier to mould but the “shotgun grip” butts right up to both the orange hat part and also the back black part. It’s all joined as one single piece, no gaps.

Is there a reason I guys want to make it look like gb1/gb2? Did you guys miss out on the Matty wand like I did years ago? Lol

I sort of do want to as well but I don’t feel like altering it in anyway.

I made an EVA foam pack and plan on attaching this. Can anyone confirm that the extra rope thing is the only differences in Afterlife that we know of so far?

The one thing that bugs me about this wand is the barrel tip. It looks thinner and cheap since it’s white plastic

I don’t plan on making mine look like GB1/2 but I know a lot of others are. I didn’t get a Matty wand and they are upwards of £700-1000 now on the second hand market.

The main changes with the Afterlife wand. compared to the original films are as follows):

  • Bent finger grip
  • Shotgun front grip
  • A visible cable running from gun box to under grip
  • Some bad welding
  • Lots of scuffs and scratches
  • Bubbling rust under paint
  • Olive drab wrap on rear grip
  • Dixie cup bracket instead of vhook

These are all accurate to the prop used in the film as the toy manufacturer did a 3d scan to base it from.

[quote=Mercifull post_id=4938860 time=1599118922 user_id=49451]A visible cable running from gun box to under grip
[/quote]

This cable is visible on some of the GB1 throwers, it’s just less obvious as it isn’t nearly as thick:

Thanks for those pics, id never noticed it before.

Pre ordered 2 from Gamestop a week or so after the unveiling. My order been saying since the first, Preparing to Ship. This morning it went to Awaiting Product Availability. Hoping its just til the ballpark of the 16th like everywhere else is saying. :sigh:

Yeah, mine did the same thing. They had a countdown yesterday as to how many they still had in stock, now they are waiting for stock? What a scam. I canceled my order on Hasbro Pulse because Game Stop said they had them in stock. NEVER AGAIN, I’m done with Game Stop.

Bunch of Jive man. They also sent me a review this item email. Like, you know I dont have it yet Gamestop! :joy: I just want to start taking mine apart like these other fine gentlemen.

Mine still says ‘Preparing to ship’. I floated the extra $.99 for premium. I’ve still kept my second wand at Pulse.

Now, im just going to break F5 waiting for the change.

I did a little video if anyone is interested.

Great video, had to look up the meaning of “Naff” as you’ve used it a few times here lately. I already figured it wasn’t good, and now I have confirmed that. :slight_smile:

It’s killing me that all you folks across the pond have already received theirs, while ours here in the U.S. seem to have been delayed. :frowning:

Apologies for the British colloquialisms lol. You are correct, both “naff” and “pap” are not so good haha.