Heavy Props Semi-Hero Pack Parts! (New MOLDS Page 2!)

[Crix]

Seller Information:

-Kristopher Marshall

-Denver, CO, USA

[email protected]

These resin parts are cast from the metal parts that I offer in this thread.

Here’s a shot of everything that’s included in the new ‘Full Resin Bundle’:

Booster Plug:

HGA:

Forgive the terrible flash, but it brings out how sharp the details are in the bolt heads.

PPD:

Beam Line and Filler Tube:

Vacuum Line:

Injector Tubes:

Ion Arm:

The resin resistors fit great!

Both the Injectors and Ion Arm molds have been improved to no longer require a seam line across the back of the part, so now both of these parts are perfect from all angles!

Gen 1 Legris Straight fittings:

These are cast with brass powder brushed into the mold, and brighten up quite a bit when rubbed with steel wool. Given some time, the surface will oxidize a bit and look more natural, so if you’re not interested in painting them, just give it a good rubbing with some fine grit steel wool, and let nature do it’s work!

Booster Frame:

Ion Arm Resistors:

All of these are solid resin cast for strength, and have appropriate dimples anywhere a hole needs to be drilled for threaded parts.

These are cast using high quality resin, which is very strong, and captures amazing details. I vacuum degas each batch of resin before pouring it, so each part comes out free of air bubbles or any other defects. The parts are easily drilled and tapped just like a piece of metal or wood. This stuff won’t chip easily, either! Once painted, these guys will look EXACTLY like their metal counterparts.

Per-part pricing is:

HGA - $20

Beam Line/Filler Tube (set) - $20

Booster Plug - $15

Booster Tube - $10

Ion Arm - $30

Injector Tubes - $30

PPD - $10

Vacuum Line - $10

Booster Frame - $15

Resistor Bundle - $8

Gen 1 Legris Straight - $10

A full set is $150, including a 15% set discount.

Shipping is calculated based on the size of the box needed, and where I’m shipping to. A full set shipped in the USA is $15, and a few small parts runs about $5 in the US generally. Feel free to PM me for a quote! I also combine shipping with the other parts I offer, just check my signature for a list!

As always, I’m happy to ship internationally, as well.

[Denike]

Will these be available as individual pieces?

Or will they only be sold as a lot?

[Crix]

I won’t have individual prices for parts until after the molds are finished and I can calculate material usage, but I can put you on the list and let you know as soon as I know!

[Crix]

First post has some pretty updates, with some even prettier parts!

[Vincenzo330]

Not to sound conceited, but seriously, have you ever seen better looking resin pack parts before? I haven’t. ==6

[Crix]

@Vincenzo330

Not to sound conceited, but seriously, have you ever seen better looking resin pack parts before? I haven’t. ==6

Pictures don’t do them justice, either.

I’ve still got most of these available, 4 HGAs, 4 Booster Plugs, 5 Beam Line/Filler Tube sets, in-hand and ready to ship!

You don’t even need to sand these guys before paint, just give them a wash and start spraying!

[Crix]

One set sold, a few more to go!

Another little update, we’ll be finishing up the last few parts and pouring silicone this weekend, so if you’re interested in ordering a full set of parts, let me know and I’ll get you taken care of.

Again, the full set of parts includes:

HGA

Injector Tubes

Ion Arm

Beam Line and Filler Tube

PPD

Vacuum Line

Booster Plug

Booster Tube

All of these parts will fit PERFECTLY on your GBFans shell, and should fit great on any other available shell as well.

[v137a]

I keep missing it if it’s in the first post. What the price for a set of parts?

[Crix]

The full set is $120 plus shipping, sorry about that!

[Crix]

I know it’s a little down to the wire, but if it’s urgent enough, it’s not too late to have a set overnighted for Halloween delivery.

[Crix]

Full set image is updated, and now available!

[Crix]

I’ve mailed out a few sets of these now, has anyone had a chance to get them attached to a shell? I’d love to see how it looks!

Also, I’ll have a few more resin parts available soon, keep an eye out!

[thebigone2087]

Haven’t attached them to my pack yet, but they are in their finishing process. Primed, and one coat of silver metallic. Will update my build thread as soon as they finish

[n0c00lgamertag]

Way too cold in Michigan for priming and painting, but here is the Crix kit in its raw glory on my GBFans shell. Nice solid pieces. I can’t wait to get them finished and attached.

[Hoot]

@n0c00lgamertag

Way too cold in Michigan for priming and painting, but here is the Crix kit in its raw glory on my GBFans shell. Nice solid pieces. I can’t wait to get them finished and attached.

Amen. Im across the ditch from Port Huron and its ■■■■■ cold.

[Crix]

Looking great! I can’t wait to see how it looks after a coat of paint.

[YHSCraig]

Got my set in today! They really look great, I can’t wait to get started.

[thebigone2087]



The parts look great!! I don’t have them all picture and I haven’t quite fit the booster plug yet, but they finished beautifully.

[Crix]

You did a great job finishing them! I’m glad to hear it went well.

I’ve still got sets available, for anyone else who’s looking. Still waiting on a free weekend with some warmth to get some garage time in, but more resin parts ARE coming! Some of them will be added to the ‘full set’, some will be add on parts, but more details on all of that will come as the parts do.

[Lewis_Tully]

Are you still doing these? Interested in a full set.