Help Identifying Shell Greeblie and Decal

Equipment Proton Packs
1

I can’t seem to find a clear reference photo of an these two greeblies that are intact. One appears to be a rounded philips head screw but the other is always missing on the packs from the reference photos.

Any help identifying what these were in GB1?

image

Next question since I’m having difficulties uploading photos is specific to a GB1 pack…

There is a decal on the Synchronous Generator or Cyclotron just below where the two wires connect coming from the Injector tubes. Is this decal white with red lettering saying Caution-Hot? I found it in the reference photo from the Minnesota Planet Hollywood pack. Is the GB1 pack have the same decal or is it a red decal?

2

post has been updated. Sorry for the large photo. I think I’ve given up trying to post photos on here and will stick to detailed descriptions.

Thanks for reading.

3

The detail highlighed is a cap head screw/hex bolt with a washer underneath it:

You can see the same setup here, to the right of the V-hook, and just visible on the mounting point of the Bumper:

This decal wasn’t on the Packs in the first movie:

image
image1024×768 131 KB

-there was a red one with white text instead:

image
image1126×1500 716 KB

4

Thank you so much for your help!

I had just recently noticed the same greeblie next to the V hook and forgot to mention it here. Thanks again for reminding me. And I thought I’d seen a red decal as well, but wasn’t clear which pack it was.

This is very helpful. Thanks again!

5

You’re welcome. :slight_smile: