I started my slime blower today *FINISHED*

Well, time to get my Ghostbusters II costume up to snuff so I am building a slime blower from scratch.

I’ve got the Alice pack frame, i’m using a 10" diameter piece of sonotube (concrete form) for the main tank. I have made some fiberglass domes for the ends. I’m using 3" PVC for the side tanks with fiberglass/bondo domes. I got some flashlights with a swivel arm for the lights. The other boxes will be scratch made from MDF wood and bondo. I have used a 6" styrofoam ball with fiberglass over it.

The biggest part of this is getting the bondo smooth, lots of sanding. I will post some pics soon.

Sounds really cool man! I’ve been hoping to figure out how to build one of these for awhile, from the looks of it, a slime blower seems like it would be easier to build then a proton pack. I could be wrong of course, either way though, keep us well updated, I know I will be watching this closely.

In a more specific matter though, what’s sonotube and how can you get it?

(I like to gather as much information on everything as possible)

Sonotube is a concrete form usually sold at building supply stores in 8’ lengths. Its about 1/4" thick cardboard like material thats wax coated on the inside. I used a plastic bowl with a 10" diameter with a ball on top to make the dome out of fiberglass then attach it to the sonotube with bondo.

I will take some pictures tomorrow to show the progress, it’s a bit of a learning process as there are no detailed plans for this unlike Stefans plans for the PP.

Well here it is, mostly done but still need a few finishing touches and the vest which I will be doing shortly. Enjoy!

![image](http://www.gbfans.com/images/pb/TD8828/Ghostbusters costume_CIMG0005.jpg)

![image](http://www.gbfans.com/images/pb/TD8828/Ghostbusters costume_CIMG0008.jpg)

![image](http://www.gbfans.com/images/pb/TD8828/Ghostbusters costume_CIMG0009.jpg)

![image](http://www.gbfans.com/images/pb/TD8828/Ghostbusters costume_CIMG0010.jpg)

![image](http://www.gbfans.com/images/pb/TD8828/Ghostbusters costume_CIMG0011.jpg)

![image](http://www.gbfans.com/images/pb/TD8828/Ghostbusters costume_CIMG0013.jpg)

![image](http://www.gbfans.com/images/pb/TD8828/Ghostbusters costume_CIMG0007.jpg)

Features:

Working spotlights

Working LED’s

Lightweight approx. 16 lbs

Stickers (Thanks TK-194)

What do you all think??

mighty impressive. First you create an awesome looking back, now this. I am jealous of. That is some mighty fine work. You too deserve a pint on me

Thanks, I’ll take that pint ! Guiness please :smiley:

I’d pat you on the back if I could, that it truely impressive. I love that you actually added the lights on the top too.

So what did you end up using for the other stuff, like the side tanks, and the 5 (or so) boxes? Looking forward to the vest.

Materials used:

Main tank- 10" Sonotube (concrete form) with fiberglasses domes on each end, covered the tank with fiberglass polyester resin so it would take the paint better. I purposly put some runs in the resin for later use (possible slime effect :wink: )

Side tanks- 3" PVC tube with fiberglassed domes on each end, I used 3" styrofoam ball forms.

Lower boxes- made from 1/4" MDF wood with poly resin over top, vanes are 1/4"x1/4" craft wood

Upper boxes- made from PVC electrical boxes and electronics project boxes from Radio shack. I used Radio shack domed lights and LED’s.

Sphere- 6" styro ball fiberglassed over and then sprayed with rubberized rocker panel guard

ALICE pack

Battery box lower- drawer organizer with MDF blocking

Lights- are Dorcy camping lights with swivel base and slide switches, I molded them into the fiberglass domes on both tanks, batteries and bulbs access is on the back and the lens screws off.

I have added a dark grey foam pad for behind the head and the “NO HANDLE” red vinyl letters

I printed off the stickers from TK-194’s post, Thanks TK-194 for making those up.

Blower gun:

3" PVC tubing with a 3" end cap and a funnel at the nozzle end. Fittings from the plumbing dept. at HD, I made up the handles from 1" Dowel and some 1/4"x1/2" steel, a Radio Shack project box and a Clippard elbow and hose. Used some eye bolts for the strap mounts and made a strap from 2" Nylon webbing with the fittings and releases. Added the cosmetic details, hose clamps,rivets, LED’s.

Hoses are sump pump poly hose, 2 1/4" diameter.

Eventually I want to put a switch on the blower gun box that turns on all the accessory lights and LED’s but the flashlights will still be manually turned on, I can do this while wearing the pack.

That’s pretty much it in a nut shell! Oh and lots of paint!

Vest is almost done, I’ll post pics of it soon

With the vest, made from oven mitt material with 1/4" hardboard and 1" nylon straps up front.

Surprisingly this weighs less than my proton pack :lol:

![image](http://www.gbfans.com/images/pb/TD8828/Ghostbusters costume_cimg2066.jpg)

:shock: How sooooooooooon?

cough just wondering.

I was a bit late on the reply… :o

Instead of starting a new thread, I thought I would just continue with this one. Most of my slime blower progress can be viewed over at proptopia I thought I would just post my progress in this thread. I hope you guys dont mind.

Here they are, I can have the vests DONE tomorrow. I just need to finish the brown strap plates, a few more odds and ends then I may just be able to get a full photo of me in one of the set ups in the next week or two. Enjoy…

Looks good Slimer7, nice work on the vests!