I got some plans from a topic in this forum, and now I plan on building my own Slime blower from them. Only question is, what is the best way to build one? I see a lot of PVC material, but I also thought about taking those large sheet metal tubes for Air Conditioning using that instead. The actual Slime gun I am going to be wrapping up in sheet metal out of a frame from one of those dollar story crayon banks.
But what would you guys recommend to a new beginner in the Ghostbuster Building World?
The domes are the hardest part of that build, once you have those in the correct sizes you can go from there, sheet metal will work fine. You can also use Sonotubes (cardboard concrete forms)
Unfortunately I don’t have a saw at the moment, but I am sure I can handmake the caps out of metal or something I have around my house. What do you guys use to as a holde for your slime gun? I certainly don’t wanna be holding into it all the time, so what’s an easy way to keep your gun holstered, but ready for action?
Unfortunately there is no way to holster it. In the movie however the gun is attached to two eye hooks by way of a black strap over the shoulder so you don’t have to hold it. I forget somewhere if someone found a more accurate strap .I thought someone said it was probably military. Many people use a replacement weed whacker strap that can be found at hardware stores.
I took a Styrofoam ball and cut it to size that i got from Walmart. Rap it in plastic rap and then use bondo over it. I am planning on trying this yet tonight. I will let you know how it works.
If people don’t go the dome route, you can always look for big plastic bowls, they’re probably not gonna be perfectly round but here’s another idea I have pimped around in slime blower topics..
For the smaller tanks, if you use the 4 inch sewer PVC for the tanks, I was able to cap them by gluing black toilet tank float ■■■■■ in there and covering them with bondo and sanding them smooth..
There’s how that worked out for me. Just another thought! They turned out to fit pretty nicely.
That didn’t work for me since I used cardboard tubes instead of PVC. it was close but still looked funny for me :(. I was able to use bondo and Styrofoam ■■■■■ from walmart to make the caps for mine.
So today I went out and got the PVC pipe and foam ball for the two side tanks. Which plans would you reccomend for someone who wants to do it the easiest way?
thanks john, it was really my dad’s idea. Something he found he thought would work and voila! I still can’t thank him enough. If people don’t go the plastic dome route, if you can find plastic mixing bowls big enough. The problem there I guess comes in that they’re not perfectly round like the nice domes are. Mine doesn’t look too terrible though!
slimer7’s plans are the most accurate to date and yield great results IMO. They are pretty straightforward I think too. Also speedmonkey80’s slime blower topic further on down the page here. They give a bit more specifics about the gun size.
Well, when I can find my camera, I will post some pics of what I have so far. I have the right tank complete and starting on the left one when I can get another Styrofoam ball this week. After that, they will be ready for bondo and paint
I also had a question, what did you guys use to mount everything together, and then mount it to the mobo?