Mounting/Storage of Proton Pack

I would look into garage tool hooks. Should be sturdier.

Jonny Ruckus would have the Modt experience here with that with his wall o’ packs

Hey Phil,

One option is to make an IBA Hanger. (Hanger for Interceptor Body Armor, what is used in the military. They can be over 40 pounds.) You can take this and modify it a bit so it hangs on the wall.

One suggestion is have a strong board (say a 2x4) going horizontally so it hits two studs. The trick of this is have the board setup so its center is where you want the pack. Then add a small block of 2x4 ontop of it in the center. Have it be about a foot long. Then another 1x4 ontop of that. Have that about two feet long. This way you can slip the straps into the gaps and let it rest there.

From 2x4 to stud use 3inch screws, three at each stud. From 2x4 to 2x4 use 2.5 inch screws, four or five of them. From 1x4 to 2x4, use 2.5 inch screws, again four or five of them.

All measurements are estimates, take a look and see what would work best for your pack.

I would also suggest to put it all together first, then sand it, and stain or paint it.

Also, this is VERY important, countersink the holes. This will help keep screws from sticking out and prevent the wood from cracking.

Enjoy.

All great ideas, guys, definitely looking into them…

Note to self, pick up at least an inexpensive stud finder.

Any lowes or home depot carry garrage tool hangers. Upwards of 80lb load tests. They are called tornado hooks or something. Thats what I have my two packs hanging on

There are two nice size tool hangers I use in on my back fence to hold ladders, those could easily old a proton pack up.

Oooohh… Just looked that up! That can definitely work! Which ones did you all use?

This one?

…or this one?

Ive used both but I like the top one better

I use the lower one, fits the neck pad perfectly. I use two mounted on a old plaster wall and they hang like a champ. Couldn’t recommend them more!

Took me a little while to find it but here is the thread I remember talking about it:

Personally I think Fernando’s way is the best:

I like the Omni mount idea, turned out really nice!