Mounting/Storage of Proton Pack

Not sure if a topic was already created for this… If there was, I’m either blind or didn’t know what to look for on the search function… My apologies…

Anywho, wanted to ask everybody, what is your way (or what you may believe to be the best way) to store and/or mount, or even display your pack when you are not wearing it? I’ve seen things like guitar stands to door hooks, to even building a wooden closet similar to that used in the movies… What do you think is the most reliable? I don’t have room to make a closet replica, so that one is out of the question… =P

Thanks in advance!

I’d like to know this too as I would love to wall mount mine in my office

I plan on doing the closet thing with it on a guitar stand.

That was what I wanted to do as well, but I have no idea what the best way was to do it, especially considering these packs are at a minimum 20-30 lbs each…

My problem with the guitar stand was that I have two rambunctious 2 year Olds running around… not a good idea for me… LOL! =P

I use a ironing board hanger and have it hanging from my bathroom door.

What is the average weight of an average pack? I know the aluminum ones will be significantly heavier…

I really like that idea, but I’m trying not to mount it over a door… I know the “over the door” style will hold it just fine, but the “wall mounted” variety probably won’t be able to handle the weight… I don’t see a “weight” rating on the ones being sold… maybe if I find the right bolts/screws to use it should be fine… Hmmm…

Mine had to weight at least 20-25 pounds

If you set a mounting system (hook, bracket, what have you) and mount to a wall stud you should be perfectly fine.

That’s assuming that I can find a wall stud in the right place…

I know that pain. I was putting up a shelf and THOUGHT I had hit a wall stud, second bracket came right out and I haven’t been able to fix it.

I think this can be solved if we don’t use the packaged screws that come with the mount… Just go to a hardware store and find screws and dry wall anchors with the right weight limit and we should be good to go… Maybe I should try that once I get a pack (yes, I do not have one yet, but I’m planning for it…)

Same plans I’m making man. A fully lit proton pack would make a killer night light.

A nightlight, eh? That’s awesome! =D

Yeah, just switch it on at night, simple as that :stuck_out_tongue: Course if sounded one might want to disable it unless they want to use it as white noise or something.

I’m playing on building a 1/4 of the rack in the back of the Ecto.

Hmmm… Maybe I should post something in the “Wanted” thread and see if somebody can fabricate a wall mount and mass produce… Like a wall mount specifically designed for packs/ALICE frames…

I wouldn’t use wall anchors. I would definitely aim for the studs. A stud finder is a great little tool everyone should own (or borrow from a friend who does) and building code (at least in Canada) is that studs need to be every 16" on centre. The hooks might not hold the frame at 16" (I’m not near my frame to check) BUT you could use a piece of wood (not mdf) and cut a piece that can be mounted to the wall in the studs and then attach the hooks at the distance needed. Then paint the wood your wall colour, or spice it up with some caution stripes maybe.

Yep, got a stud finder, so I’m good on that, but the other problem I ran into is that most of the wall mounted ironing board hangers that I found are made of thin metal, and probably couldn’t hold something weighing 20-30 lbs…