Navy Tru-Spec to GB2 Charcoal

May wanna try PM’ing FunkPunkTwang. Pretty sure I read somewhere that he has died a big batch of GB2 suits for GBNH

I’ve done 2 navy blue tru specs using mburkit’s method and both have turned out perfect charcoal gray. I used a 5 gal bucket with about 160° water. Only difference was i had to use a darker shade of green as my local store was out of alot of rit. I was only able to buy 2 packages of color remover but to adjust i left the suit in the bucket for twice as long. Thank you for the post. I was nervous that i was gonna ruin the suit until it came out of the dryer. Thanks again!!

I’m about to walk this same road. Did you hang dry or machine dry the suit in between the dying process?

I machine dried when I was doing 6 at a time to speed up the process.

Been following this post for a few months, since I decided to order a navy Tru-Spec flight suit. Here’s the end results. I followed a bit of all the recipes found here. I’m really happy with the end results! Thanks for all the shared information! Time to add the patches now.

Before:

After:

This is one of the better detailed Navy to Charcoal Grey Suit threads I’ve seen. I ordered a Navy Blue Tru-Spec suit and will definitely give this a try. One thing I notice are streaks in some suits, could that be avoided by turning/stirring the suit in the color remover and dye mixture?

Tried this recipe on my suit from GB Fans.

Before:

image

After:

image

Would have liked it a little more charcoal.

Seen that some suggest to skip the Royal Blue and just use the Liquid Black and Kelly Green.

Any thoughts?

So if the suit is at all Nomex, is it hopeless to lighten? I got two Tru Spec suits online that’s 80% cotton and 20% Nomex, and I’m getting nowhere. Hit it in four different attempts with color remover, a total of 14 boxes. Last round was four in the washing machine because I gave up on hand-agitating.

About to dye it today. Any reason people are using royal blue/Kelly green instead of Rit charcoal grey?

Too light?

Ooooookay, so I’ve had my Tru-Spec navy suit for a long time, but always felt a bit of imposter syndrome with it. Like yeah, I like the idea of having a blue suit to be unique like each of the Real Ghostbusters, but this navy feels too close to being a wannabe charcoal GB2 suit. And I just really wanted that original charcoal suit from GB2. And in the future I’ll buy another navy one and dye it royal blue. Or hot pink. So I went ahead and bought some dyes and stuff. This has been a wild, crazy experiment.

It’s so hard to get the color, both brightness and temperature/tint, correct in pictures. So I’ve tried to use different lighting conditions and tried to alter some pictures to match in person looks.

First thing I did was got a pot of water nice and hot, and put in two packs of RIT color remover (they only had two packs at Hobby Lobby). I put the suit in there for a good three hours, and it was like nothing was coming off at all. I was ready to give up, but I put it in the washer and washed it with a couple of Tide pods and around a cup of bleach. That worked wonders! Not sure if it was the bleach or something to do with the color remover that helped. It turned into a pretty charcoal gray based suit after that. But very streaky and light.

After bleach wash:

So after this, it was time to go by the recipe posted in this thread. I first started with RIT liquid black, half a bottle. The recipe called for 45 minutes, but uhh literally 5 seconds after I dipped the suit in, it turned pure black. I kind of freaked out thinking I had made the suit completely black, but I went with it for a bit. I also dyed a white belt to go with the suit. The belt turned out to be a dark charcoal color, so a pretty good match.

I took the suit out and put it in the washer with another Tide pod, then dried it. I could see I hadn’t turned it black, but actually pretty much charcoal grey.

Surprisingly, it had turned out to be a rather light grey. Aside from wanting to do it the same way everyone else did it with the recipe, it was too streaky and blotchy and some areas looked rather unevenly dyed. Or undyed. So I continued by dying it with a table spoon of Kelly Green powder (they didn’t have liquid) and a table spoon of Royal Blue liquid dye. So essentially a 2 Royal Blue : 1 Kelly Green mixture. However the Kelly Green definitely overpowered the stew and it was pretty teal/green.

I gave it a quick wash and dry and the result was looking ok, but there was a lot of unevenness and blotchiness. Some areas definitely had green tints. I could have just said I was slimed, but I’m picky, so I threw it back in with some more Royal Blue AND some RIT liquid Charcoal Grey. Wondering if I should just do charcoal grey the next time..but I like the idea of it having some blue in the mix to give it that blue cast in some lighting.

Here are some pics of the end result, which I’m pretty happy with. It’s rather dark in person, but I think that’s what the real ones probably were like. With bright lighting it LOOKS lighter, but without flash it’s rather dark. I kind of wonder if it’s supposed to be lighter, but maybe it’ll fade after a few washes. In some lights it has a blue cast, in others it has almost kind of a tinge of brown. So I suppose that’s a sign it’s pretty neutral grey. I have no doubt the screen used ones probably really did look navy in some light.

image

Here’s a picture of the suits in the movie when they looked a pretty neutral grey.

So my main problem is the color of the velcro strips. If I were to do a second one and want it to be as close as accurate as possible, what should I change? Should I start with a khaki or a black suit?