I was wondering ppls opinions on pack shells (Vac u Formed and Fiberglass/resin) VS Scratchbuilt packs… I have made a scratchbuild pack and I continue to work on it to this day… only problem is it turned out kinda sloppy (Mainly due to the fact I built most of it when I was 15). I am wanting to do simething more accurate w light and sound kits… So What do you all think is the best route for accuracy and keeping enough room inside for electronics…
I have a scratch built pack I got lights and sound no problem…
as far as accuracy… the shells are made from mold of packs that were fan made… so it depends on how much time effort and love you want to put into it..
I do agree my pack made entirely of sintra is pretty solid more so than a Vac form, I also planned out the build to include lights and sound so I have little tubes running through that work perfect… I even modded the crank knob to work as my amp Vol.
It all depends how deep your pockets are. Resin, Fiber glass shells will easily run you over $300. Also, if you buy all the parts, and gun kit. Yeah, aluminum parts are quite accurate, and looks great, again it’s really expensive. All and all, it’s up to you. The Studio Creations pack is reasonably nice, they updated their shell recently also.
Just for the record, your pack looks really nice. Better than mine, like seriously. Also, if you ever want to get rid of it…I would probably take it, lol.
I agree you should look into one of the bigi71 shells that Vincenzo330 sells. I Have seen them in person and they are awesome. I believe Nick-a-Tron makes a bumper for that specific shell and you can order a custom fit mother board from Vincenzo330 as well. That is my plan.
ummm because people can make some gorgeous packs that weight practically nothing to the wearer and spend a 3rd of what they would with a fiberglass shell. Mine was $150 with a bumper and ion arm… Pretty cheap if you ask me, and its shaping up beautifully.. Plus its not difficult or expensive to reinforce the plastic, in my case it was free.. On another note, Fiberglass isnt exactly ■■■■ proof either. It is stronger yes, but it can easily crack if your not careful.. If some drunk screwball grabs your injectors and pulls as hard as they can it wont matter what shell you use or if you used a L-bracket.. Those things are coming off..
Unless you’re going for extreme accuracy, it doesn’t really matter what you use as long as you’re happy with it, since you’re the one who’s going to be wearing it. I ordered a SC vacformed shell a few weeks ago, haven’t got it yet but I’m sure I’ll love it. I got it because it was cheap so I can afford to get a nice light kit and as many real parts as possible, and it’ll look good for Halloween and the one local convention + a few events. I plan on picking up a bigi71 shell next year, so I’m going to make everything on the vac shell removable.
Ive made only scratch built so far do to the cost of shells a 4x8 sheet of 1/4 in. good quality plywood goes a long ways and Ive only followed the plans on here. If time is an issue for you then maybe look somewhere else as scratch built takes a very long time. I took hours hell maybe days sanding putting seams and sanding agian priming and painting figuring out wire location, but in the end I was happy with what I have.
There was actually another thread that highlights this that I think you should give a look at with comparisons between scratch built/vac-form/fiberglass shells.
I say that because I have yet to seen a good looking vacuum shell. If there is one, please by all means show me. I understand they’re cheap and at the same time for someone getting a vacuum shell, I would assume, doesn’t really care for all the screen accuracy stuff. I personally spend my money that would benefit me in the long run even if I have to dish out “a few more bucks”
Having some drunk pull or grab on my shell is EXACTLY why I would never wear my pack to a Halloween party. Especially after all the work and money I’m putting into it.
i’m sure some other people have seen more then i have.. but, i havent seen too many vac-form builds to show you. I have however remembered gb_dans in the back of my mind. Its not complete but it does look mighty fine if you ask me.
Thanks for the input! Im probably going to shy away from vaccu formed… I know what its like to go to a party and someone mess your pack up… My current pack has MANY cardboard covered in Resin parts on it… anyhoo a girl pulled my thrower off the hook..the wrong direction and took the hook with it… I was so ■■■■■■
I love that pack though its a scratch build that I did when I was alot younger, but its almost solid otherwise Id just put lights in it and be happy…
Im thinking I will make a scratchbuild on most of it but get ahold of some people on here who make resin parts for things I tend to have trouble with… (Throwing chicken Im guessing I will be getting ahold of you this summer when Im ready to rock out the particle thrower if your cool with that ) I have a buddy who has a degree in electrical engineering and he said he is goonna make me something called a PIC or PIQUE or something like that to control the lights… and I have something that I havnt EVER seen before and am considering
In the game the packs overheated… so at my work (An auto parts store) we discontinued all of our streetglow neons…so I bought all of our red blue and green neon wire and am considering snaking that into the various tubing in the pack so I can have a wire “Overheat” effect… only problem is that al of the streetglow stuff is set for a 12 volt system and Im afraid my power source (a set of 8 AA batteries) wont last too long…
So this idea may or may not happen if me and my buddy cant figure this out.... (He wants to put 2 6volt motorcycle batteries in there or find a small rechargeable 12 volt system...)\
Just thought yall might like the wire overheat idea LOL…
Sorry I havnt updated in a while, Ive had a crazy work schedule… So that EL Wire runs off 9v? EPIC Soo I had a bit of a setback w my new pack… This is the mockup I did using foam poster board… I think I about have the dimensions right… So I attempted to use this mockup as my pack by fiberglassing over it… I failed miserably LOL