I didn’t see anything like this when I was looking the other day, so I’m starting my own. I only have the GK shell so far, hoping the hyperdyne kit I paid for will get here in time for Halloween, but regardless, I’ll document the process. I got the kit “a la carte” so you’ll get the added bonus of learning how to cut and assemble the wing PCBs, LEDS, and installing the servos.
Anyway, got GK’s upgraded PKE kit today:

VERY nice. Holes are all pre-drilled, kit comes pre-sanded/cleaned up, with all LED holes cut, so into the soapy water it went to finish cleaning off any mold residue:

then just let it dry fully:

Once it dried, I cleaned out and widened the screen opening, and trimmed some flash from the screen itself to get a nice fit. I also drilled two small holes in the bottom of the handle on the back piece, then bent a small piece of thick coat hanger to make a loop for hanging the PKE from my belt. Then, on to paint! I forgot to take a picture of the primer stage, but I follow irricanian’s painting advice. I got primer, silver, and black spray paint from the same company (Krylon, in this case): Two coats of primer with some light sanding in between, then one coat of silver:

I went ahead and did a second coat of silver on the parts that were staying silver, then did a coat of black on the main bits:

Here’s a shot of the painted parts on my work table:

You can see the belt clip loop I added in this pic. I leave you with a quick shot of the pieces hand assembled to check the look:

That’s all for now, I’ll update again when the hyperdyne kit gets here!!