Its made from Latex. Pretty flexible but still strong. Only took me about an hour. but i think it does the job. the opening is 1/2" with a 2mm lip inside (to keep the hose in)
Any feedback?
Its made from Latex. Pretty flexible but still strong. Only took me about an hour. but i think it does the job. the opening is 1/2" with a 2mm lip inside (to keep the hose in)
Any feedback?
How is it made?
I sculpted it out of clay, then made a plaster mold, then cast in tinted latex. It was the first casting, so it looks a littel rough…
Lawrence
Nice technique, You could do a few parts like that for a decent stunt pack!
Yea thats a good idea. I used latex for my ribbon cable also
Lawrence
what is it
It is the uniform hose connector for the yellow leg hose. ![]()
hahaha… thats awesome!!!
…not poking fun at you ian, as a newbie i wouldnt expect you to know what that part would be. but zack quoting that was, well… technically great comedic timing. nicely done zack
Yeah I didn’t wanna sound like I was making fun of him.
but I saw some of his other new topics AJ locked before I posted it asking for molding tutorials, slime recipes, ghost trap dimensions, will gb3 be made!
Anyway, on topic, the connector looks great! I have just been using my baby bottle top one forever.
Might use Thiago’s tutorial though one of these days! Sometimes in uniform I just zip the connector into the leg pocket instead of trying to connect it. It’s hard sometimes. The sandwiching the fabric between it method.
Thiago’s idea is great. I’m actually using his plans to build a hose connector for my uniform.
I would like to address something while we are on the subject of hose connectors. A lot of people here seem afraid to poke a hole in their uniform to secure the hose connector and do it permanently. The question I have to ask is why? Are we not creating Ghostbusters uniforms? In the movies, did the hose connector ever get removed from the khaki uniforms? Unless the flight suit will be pulling double duty as both a military spec flight suit AND a Ghostbusters uniform, bolt and sew that sucker on. It seems funny to me that after cutting off the nametag velcro, submitting the suit to dye and sewing name and logo patches on that people stop at the hose connector. That’s just my 2 cents on the matter and something that’s gotten my curiosity lately.
Thiago’s idea is great. I’m actually using his plans to build a hose connector for my uniform.
I would like to address something while we are on the subject of hose connectors. A lot of people here seem afraid to poke a hole in their uniform to secure the hose connector and do it permanently. The question I have to ask is why? Are we not creating Ghostbusters uniforms? In the movies, did the hose connector ever get removed from the khaki uniforms? Unless the flight suit will be pulling double duty as both a military spec flight suit AND a Ghostbusters uniform, bolt and sew that sucker on. It seems funny to me that after cutting off the nametag velcro, submitting the suit to dye and sewing name and logo patches on that people stop at the hose connector. That’s just my 2 cents on the matter and something that’s gotten my curiosity lately.
I think it’s mostly that sewing is reversible. Once you cut a hole in it and put the connector in, that’s it. If you decide you can’t stand it, you’re screwed.
I think it’s mostly that sewing is reversible. Once you cut a hole in it and put the connector in, that’s it. If you decide you can’t stand it, you’re screwed.
you got it right there. you better make damn sure that the connector is where you want it before you go running a bolt or screw through it. also, you get that hose caught on something and it pulls the connector. there is a better chance, i think, of you ripping the suit with putting a hole in it than there is by running thread through the the little holes around that outer ring
The hose (at least on my connector) pops straight out. It isn’t a permanent attachment. If my uniform ripped before my hose comes disconnected, I’d be a bit concerned.
The plans I’ve seen utilizing the bolt also incorporate a fender washer the same size as the connector. This helps to distribute the load around the whole connector and not just on the bolt. Of course the connector is also sewn on. This isn’t a question of tearing a simple screw head out of a hole. It’s a question of tearing 6 stitches and a hole the size of the hose connector out of the uniform. As I said, that would take quite a bit of force. If it didn’t, the uniform has more problems than just that. I’d think constantly screwing the connector on would stress the fabric and eventually wear a hole in that area or otherwise compromise the integrity of the fabric.
As for the placement argument, it’s the same as patches. You don’t fully attach the thing until you’ve test fit it. Pin it in place or run one or two strands of thread through it and put the uniform on. Once it is in a spot where you like it, THEN secure it permanently.