Well, I finally got around to making a more accurate hose connector AND molding it up AND casting it in urethane rubber. After seeing the shots Cyland posted of the screen used connectors I figured i’d just scratch build one and cast it in real rubber.
Here are some progress pics of my build and the semi-final master to be molded. There are a few details i’m not happy with i’m going to fix, then into it’s little lego castle it goes to be molded up!!
Used a 3/4" PVC coupler and cut it to the size I needed…
Bought 1 1/2" and 5/8" rubber table fet to cut to size:
…coupler piece cut to size and 3/4" “plug”
…this actually worked out really well because of the little part that sticks out a bit on the real piece…if the original piece IS a valve stem seal, the little space is where a spring would go…or in the GBs case, a zip tie:
The main body:
5/8" foot cut to size and the cut to size PVC coupler put together for the top piece, fits inside the main body:
Needed a 1/4" round base, didn’t have anything that thick, SO, glued two 1/8" styrene sheets together, and cut the shape on my bandsaw…
All the parts together, unglued:
Pre-primed piece, everything glued and filled…
…size reference:
Primed, but i’m still going to go over a few details and make it better for molding…
…and tomorrow, the molding…and yes, my mold box is made of legos, nice idea and so far it’s worked out pretty good!
…finished product should come out this weekend…I will cast it in urethane rubber…all materials are Smooth-On, I have a distributor local to me, about 15 mins from my house! ![]()
…to be continued!
-Thiago
PS These will be for sale for anyone interested, PM me if so.

