Stantz 718's GB1 Pack Build

First time posting here but no stranger to researching many things on this site…

I’m in the process of building a STRICTLY GB1 pack.I have a deadstock LC1 ALICE frame. I purchased a shell and motherboard from this site as well as a few other starter items. I got the GB1 style ribbon clamp off ebay as well as a Dale RH-25 resistor and Clippard R701 fitting. My first questions are I seen an aluminum kit from Heavy Props and was wondering will it fit the shell I bought from GBfans? I also need to know where to get the brackets and all the correct screws I need for the GB1 pack. I also need to know how to attach the frame to the motherboard to the shell. Do I need to tap screw holes in the brackets and aluminum parts? If so what size tap? Is there a STRICTLY GB1 pack parts list floating around. I want my thrower all aluminum with a rotating grip and extendable/retractable barrel mechanism as well..all advice is welcome. Thanks and this site Rocks The Spot !

The only aluminum part that you will need to provide measurements for is the booster tube. You will need to find the proper angle and length for it to be cut to fit the gbfans shell. Everything else has flat mounting points so they generally will fit all shells if they are the proper measurements.

The thick brackets and 3/16 wide ■■■■■■ pop rivets can be purchased from Ejgunth87 here on GBfans. You could alternatively check local metal suppliers for similar aluminum bracket material that you could cut into brackets yourself. My local place has a scrap bin to buy cheap aluminum scrap from, it’s a good source!

Here is the list of socket cap bolts you will need: You can buy most of them from Lowes or Home Depot (the 4-40 ones are hard to find sometimes), or online at websites like Fastenal (much cheaper but expensive shipping).

There’s a good thread in the tutorial section on how to attach your brackets to your motherboard and shell.

You will need a 1/4-20 tap and drill bit set for attaching the shell to the brackets that can be purchased from home depot for around $5

Most aluminum parts come with their mounting holes pre-drilled and tapped so you won’t have to worry about those if that is the case.

Hope some of this info helps.

-Lowberg

If I understand correctly (and anybody can chime in if I am wrong), the GBFans shell is based on the Bigi71 shell… Vincenzo330’s shell is a higher quality version of the Bigi71 shell (thus, the name Bigi330)… The aluminum parts that Heavy Props sells on eBay is the same aluminum parts that Vincenzo330 sells here… so, with that understanding, fit-wise, the Heavy Props aluminum parts will fit the GBFans shell perfectly, since they are all based on the original Bigi71 shell design…

I concur with Phil’s assessment. I have the GBfan’s shell, and Vincenzo330’s aluminum parts and they fit like a glove!

My advice would be to live in the proton pack section of the forum for a couple weeks looking at all the builds that you can. There are so many that I used when I was building that I would feel bad if I missed mentioning one, so I won’t. Just have a look through and read read read read and then read some more. Then go back and reread. This way you will see what parts to get and where to get them before you resort to ebay. Not that ebay is bad and some sellers sell on here and ebay to reach a wider group of people, but I would support someone here on the gbfans shop before ebay.

Also, look through the blacklisted sellers before buying anything as well, and the feedback threads as well.

Good luck and start and use this as your build thread with lots of photos. This way we can help easier.

I suggest you pick up a 10-32 tap and bit as well as an 1/8 NPT tap. Those are two that I used a lot. I tapped my fiberglass to hold my legris straights and elbow as well as cleaning up the threads from my metal parts after paint.

Harbor Freight has an insanely good tap and die set that only costs about $30…

Lowes also has tap sets by Irwin that include the necessary drill bits. I think it’s aound $25 for the set. It’s only taps. No die set in it.

Here are some pics of what I acquired thus far…

Fellas,

Thank you for the input and assistance. I will post all my updates on this thread…As far as purchasing from reputable members on this site I’m with it. Like many this has been something I wanted to do since I was a runt. Guys thanks again for all the guidance thus far. Im an accomplished DJ/Turntablist who is always dropping mixes..any one need a mix let me know.. Peace

Also what tubing did the GB1 packs use? Was it Clipart or Nycoil?

Clippard. But vintage clippard can be hard to find.

Here is the latest update…these just came in

I don’t need all of these if anyone is interested

in trading feel free to pm me…

So are you doing an OMNI GB1 pack, or did I miss you saying that?

I really don’t know if Im gonna go with Ray’s pack from the Sedgewick or the Zeddemore/Omni pack…waiting for my shell and motherboard from Gbfans…

Rays hero from the sedgewick had a Dale resistor not a pacific resistor if I remember correctly

They also used Legris tubing.

The Venkman Hero pack also had Nycoil 4mm tubing on the Ion Arm.

I meant nycoil…Dunno why I said legris.

Cause nycoil bought legris?

1 Like

Hey guys its been a while but just got these Legris Straights in today. Still waiting for my Shell and Motherboard to arrive from GBfans and my aluminum thrower from Heavy Props/Crix…