The MIGHTY Microcontroller (light & sound kit) - LAST CALL!

Hey guys,

If you’ve been following my thread in the Proton Pack forum, you’ll be aware that I’ve been working on something big!

The MIGHTY Microcontroller!

The MIGHTY Microcontroller is perfect for your proton pack! And your trap. And your giga meter. And anything else you can come up with!

It’s a light and sound and servo controller all in one. It can control lasers and vibration motors, and even high-intensity automotive LED bulbs for strobe effects. And it can do this while playing sound effects or music. It has a built in 2W amp, so it’s about as loud as a pair of typical desktop computer speakers. Perfect for a trap or other handheld prop, though you might want to use an external amp for your pack itself. Speaking of which, it can run off 6-12V, so you can use whatever battery you like.

The sounds are stored on a MicroSD card, which also holds simple scripts in a language similar to basic which you can use to customize its behavior. You can also read switches and potentiometers connecting up to 12 of them to trigger animations and such.

The boards are $100, and the expansion modules which allow you to drive more LEDs, vibration motors, automotive LED bulbs, and lasers are only $15-$20 each. This makes it competitive with other light and sound kits out there when you consider that you won’t need an external sound module or one of those boards to make said sound modules interface properly with an external amp.

If you’re worried about having to code it yourself, don’t be. Not only is the scripting language extremely simple to use, but I’ll also be offering some pre-made scripts to show you how everything works, and these will include one for the Proton Pack and possibly the trap and other props as well.

This project has been a grueling two and a half months in the making, but with the design phase complete, I’m now taking pre-orders via a Kickstarter I’ve set up so I can get the boards manufactured. These will be professionally made and assembled rather than put together by hand by me, which is why I need to have a lot of them produced all at once. This is also what has allowed me to offer them at such a low price.

You can check out all the details, and place an order here:

http://www.kickstarter.com/projects/shawnswift/the-mightytm-microcontroller

Like all Kickstarter campaigns, you can pledge however much you like, and select a reward level equal to or less than that pledge if you wish. This is also an all-or-nothing deal, so if I don’t get enough pre-orders for the Kickstarter to be fully funded then you won’t be charged a dime.

Shawn Swift

Manchester, NH

[email protected]

These things were posted in the other thread, but I should probably post them here as well…

Here is some example code which would play a sound while you hold down a trigger, and play one of two sounds when you release it depending on how long it was held:

IF SWITCH[1].Pressed
   TIMER[0] = 0
   PLAY("fire.wav", LOOP)
ENDIF

IF SWITCH[1].Released
   IF TIMER[0] > 30
      PLAY("ceasefire1.wav")
   ELSE
      PLAY("ceasefire2.wav")
   ENDIF
ENDIF

And here’s some videos which will give you an idea of what this board will be capable of:

This is a board using one of the same LED driver chips I have on my board:

There are two of those on each MIGHTY, and you can add up to eight more, allowing you to drive a total of 240 LEDs.

And here’s someone using the same kind of 12V LED bulbs in their thrower which can be driven with my Boost Module:

Imagine a trap with a large square version of that going off!

This looks badass!

If your building a pack and not jumping on this you are just nuts lol

Let’s go everyone lights and sound all in one for 100 bucks!! And you don’t even have to pay right now, payments aren’t taken for another month. Not to mention user programmable to do whatever you want it to do when you want it to do it.

This is what a lot of us have been waiting for!

Let’s get this backer level up so these can become a reality!

Hey guys,

Just wanted to let you know that if you’re waiting for pay day, you won’t be charged anything until 8pm Friday May 18th. Even if you back the project now. And even if the funding goal is met before then.

That’s exactly what I was waiting for :slight_smile:

Pay day is tomorrow but I’ll go ahead and pledge tonight when I get home. :cool:

Backed! Looks pretty cool! Can’t wait to try and figure out how to install it…

What would the actual cost though be for everything you’d need? Speakers, leds, amp, sd card, battery and holder, the works? I’m guessing that still brings you to about $200 or so, if you wanted the vibration unit as well.

I know the 3w speakers in the thinkgeek sound shirt aren’t that loud at all, unless thats just the speakers themselves, and this has only 2w, so you’d need an amp as well, right?

You make a good point here but regardless of what kits you buy out there you would need an amp, speakers, batteries and at least one battery holder.

For this setup, what you need above and beyond the normal: a 2g sd card can be had for about $10, a second battery hold another $5-10, $10-15 in LEDs depending on what you want and probably another $10-15 in switches (part of this cost you’d have to spend on most sound kits out there because they require different switches to run both sound and lights)

I’d say about another $50 on top of the things you would normally have to purchase would be a reasonable budget.

To me I feel this is entirely worth it to have the customizability for sound, lights and what you want to do with them.

I picked up a 4/8 ohm 6x9 at autozone for less than $20

As Libtech said, with any other kit out there you’d need to buy speakers, amp, and battery separately, so it’s not fair to consider them as part of the expense when comparing this with other kits.

It’s also not fair to include the cost of the vibration motor as no kit currently being sold comes with them. But you can get a tiny vibration motor like the ones that were used in Exoray’s kit for less than $5. And you can get a big one for around $10.

The 2gig MicroSD can be had for less than $4 on Amazon and I’ve been looking to see if I can buy them in bulk to get them cheaper. Most people have a few of these laying around their house though in old MP3 players and cellphones.

I don’t know where you got your wattage rating, but if the speaker itself says 3W then that’s the wattage the speaker can handle, not the wattage the amp outputs.

Also, if you have a listen to these youtube videos, I think you’ll agree the t-shirt doesn’t sound anything like 2W:

T-shirt:

2W amps:

Keep in mind the video of the beer can amp is outdoors, which makes it sound a lot quieter due to there being no walls for the sound to reverberate off of.

Now I know what you’re thinking. You’re thinking, “That isn’t as loud as my pack.”

Well, I never said it would be. If you want loud pumping bass, you need a lot more wattage. But for most props, 2W is plenty. If you stick it in a ghost trap it’ll be way louder than the Matty one.

So yes, you’ll want to use an external amp. But that’s not something you wouldn’t have to buy with any other sound kit.

I wasn’t really attempting to point anything out at all, or compare it with other kits or resources available. I was looking for more information as to total installed cost.

As for switches, as Libtech also pointed out, folks often end up having to swap their switches out and use inaccurate ones to make the light kits and sound kits work together. So you’d have the expense of new switches anyway.

And regarding LEDs and the cables needed to connect them and the expansion modules, you can get all the LEDs and cables you need for around $25. And if you use ribbon cable rather than individual wires, you can cut that cost in half.

Also, if you’re worried about hooking up all those LEDs and switches, and the cost associated with it, it’s almost a given that I will be offering a set of switches and LEDs that are already wired up for you. I would for example like to offer boards for the bargraphs (both thrower and trap) and power cell. These boards would probably run less than $10 each. The rest of the LEDs might be $5, and the switches would be around $15.

And with the MIGHTY being only $100, this is still less than buying a light kit, sound chip, and distortion fix module. And with those you can’t connect a vibration motor, you can’t attach an LED bulb for strobe, you can’t really customize your pack, and if you’re lucky you’ll get one song on that sound chip along with your sound effects. You could fit the soundtracks and scores from both films on my board.

Okay, well give me a minute, and I’ll try to answer that.

You pretty much already have somewhat, but it would probably be good info for potential customers.

I apologize Gareee I wasn’t attempting to make it seem like you were pointing anything out at all.

I was just trying to answer your question as to the extra items you would need to purchase to get this kit up and running.

I’ll let Shawn answer your question a little more in depth.

No worries.. “intent” can always be hard to read in posts.

However, I didn’t want Shawn to think I was being critical of his kickstarter.

The MIGHTY with 3V and 12V modules runs $125.

Speaker - $10-20

Amp - $12-20

MicroSD card - $4-5

Vibration motor - $5-10

3W LED Bulb - $3-5

LEDs and cables - $15-$25

Switches - $10-15

So you’re probably looking around $75 for everything else, making your estimate of around $200 correct.

But once again, I need to stress that this list includes stuff other light kits also don’t come with and optional stuff you can’t even add to those kits like the vibration motor and strobe.

When you compare apples to apples, the MIGHTY costs about the same and sometimes less than a separate light kit and sound kit will cost you, but it’s much more configurable.

Not to mention you can’t change those other electronic controllers on the fly. You can’t swap from a Ghost Trap to a PKE Meter to a Proton Pack to a Video Game pack with the other boards. The versatility and power of these is much more.