Where can I get my patch sewn on?

I’m not about to try and do it myself, I’d rather take the suit somewhere and have it done right. Any suggestions?

Lay the patch flat against the suit on a table. Can you wrap bundles of sticks or pencils together? Replicate that same concept, only with a threaded needle, wrapping the thread around the edge of the patch and through the suit. Go slowly and keep it flat and even.

It’s not hard.

I’d really rather just take it somewhere and have it done professionally.

And the word we use for one who sews professionally is: _ _ _ _ _ _.

Plug that word into your local yellow pages and you have your answer.

they’re called tailors.

Look also for “alterations”. Many dry cleaning places also do alterations but do not call themselves tailors, as they only do minor work such as replacing a button, making a hem, and certainly they can sew on a patch.

last tailor put mine on too low…so you can do what I’m doing with the replacement. GIRLFRIENDS! :slight_smile:

Sewing is a very simple concept and one that has been around for thousands of years. Do yourself a favor and sit down for an hour or two and learn this most basic of skills. Sewing on a patch isn’t like sewing a set of clothes, there’s no need to be neat and uniform in your stitching and if you match the edge color of the patch no one will notice it anyway.

Egh, I’m not keen on hand-sewing either. :stuck_out_tongue: Another option is to use fabric glue. I used this stuff called Fabri-tac to put the patches on one of my suits. Be sure the suit is pre-shrunk first, and use a marker to mark where the patches should go. While glueing, watch how much you put at the edges, as it tends to bleed out the sides when you press the patches down. Also putting cardboard on the inside of the jumpsuit is a good idea incase the glue seeps through a bit. And lastly I did some minor sewing afterward to secure the corners better (optional). The glue can get kind of messy if you’re not careful, but I was done in a fraction of the time it would’ve taken to hand sew them on entirely.

You can actually purchase a clear thread which is what I used for sewing my no-ghost patches on since the edge color is not the same all the way around the patches I have. I know the OP does not want to tackle this himself, but for those that do want to the clear thread is another option.

My no-ghost patch is ironed on, but it doesn’t seem to be taking; I’ll have to keep the clear thread in mind.

I’ve been known to make a mess of sewing buttons on, but my name patch looks pretty close to professional. Just take your time; I used straight pins to hold it in place and it looks great.

If you can’t do it yourself, you can always ask mommy.

Like everyone else said, sewing isn’t hard. But if you take it to a tailor you’ll have to be very specific about placement and orientation, because no doubt they’ll do a shit job of it. You’ll get better results if you do it yourself, and if you mess it up, just un-pick the threads and start again.

Personally, I went to the supermarket and bought a 4-pack of cotton thread (red, black, white, blue) and some sewing needles and just stitched red thread around the logo, and black thread around the ghost’s head and hands. Looks pretty tidy.

I did my own the first time…wasn’t A-1 picture perfect, but it did the trick.

Second time, I bummed a coworker to do it for me.

If there’s a third time, I’m thinking about fabric glue (especially if I’m pressed for time).

Fabric glue is good to hold it in place while you line it up and then sew it, but I wouldn’t trust the glue to hold long with these patches.

^ This is true…I don’t know that all fabric glues are created equal, though. Some might have a better hold, but I don’t know if any are “permanent.”

I probably will sew the patches myself if I do buy another uniform, but the glue is kind of tempting.

I have seen glue specifically for iron-on patches that claims to be permanent…here: http://www.beaconadhesives.com/cgpatch.html

Haven’t actually used it myself though.

My two cents. Never use fabric glue. If you ever have to move the patch (saw, you put it too low, or on crooked), it’ll cause you a world of grief.

I just hand sewed by patches. Nothing fancy. I went to a dollar store and bought needles and thread (I used white), did a simple stitch around the border, and then just colored the visible thread with a pen (mostly the red and black parts).

As mentioned, it’s really not that hard to sew something like a patch on. Just think. In Japan, kimonos were stitched loosely so that you could easily pull them apart for cleaning or repairs. And those were day to day wear. You’d be surprised how easy hand sewing is, and how good you can make it. Just be patient and take your time with it.