I gleaned this method from the Studiocreations website, one that you are probably aware of. This is my very first attempt at vacuum forming. It’s taken me awhile thanks to the wonderful job I have (cough cough sputter), but here is my progress thus far:
It’s about 85-90% screen accurate thus far. By the way, in case any of you are wondering, PAM is the best wooden mold release this side of the mississippi. There is tape on the pack in the pictures because I was in the process of letting the glue dry on various components. I have the HGA made and ready, as well as most of the proton gun. I’m in the process of figuring out that whole pesky electronics thing. As I type these words, a solderless bread board sits in front of me, on which is a circuit that I worked out all by meself (ok, marsupial helped) that contains a little amber LED blinking away happily at the rate of about .67 hz . Now all I need is to wait for the several 4017 decade counters to come in the mail, and I’m back in business. Marsupial, your help was monumental!
More pics to follow.
Brian
PS. I think I should clarify that you observant folks might have noticed that the ion arm in the pics above is VERY short/truncated. I did this ON PURPOSE, because as a previous proton pack owner I can attest to the frequent BASHING of the ion arm on various doorframes/people as one makes ones way around a crowded area. So I limited the size of the ion arm in order to make the proton pack more “party friendly”, so to speak. If you want to crucify me and call me names, fine. I care not.
haha she was an innocent bystander I was standing next to waiting to go into the bar. I think I just turned to the right and I hear “ahh” I was like “sorry” Even before wearing it out I was like “damn this thing sticks out to next week.” Luckily it was only cardboard..
In the movie world, it’s easy because everyone takes one look at this dangerous looking piece of machinery and stands clear, in the real world however everyone wants to look/touch or in the case of a bar, bump into everything.
Once again, very cool and very practical smart mold!
Some of you asked to see my vacuum forming setup, so here are some more pictures from the beginning of this project (oct 3rd ish)
I constructed the bucks out of wood from home depot (various kinds). I designed it in three pieces: upper half, lower half, and a third buck for the gun body, ion arm, bumper ‘faceplate’, and shield thingy…forget it’s name…stuff I didn’t want to make every time:
Here are a bunch of the shells I pulled from these molds…
Here’s an earlier WIP shot:
Oh, I forgot to mention…to even get this project off the ground I had to snag an oven (my preexisting one was way too small) off of craigslist, and then bring it home. Then I had to basically rewire my garage because there was no available 210 volt outlet to be had. So I was up in my garage ceiling running a huge wire from point a to point b. It was…irksome. Got me over my fear of heights though.
Hehe, thanks. I actually had the frame from the last proton pack I made way back in 1999, and it happened to be pretty much the exact size. This is going to sound weird, but i really am a fan of the “universal studios” style asthetic, the professional-yet-not-accurate-made-in-an-orlando-prop-shop look. I think this is because of my love for the theme parks of Orlando…anyway, I digress.
This is my set-up:
I have a large piece of plywood resting on top of 2 saw horses. A small 3/4’’ hole in the middle of the plywood, between the 2 horses. Underneath, a steel pipe is connected to a circular fitting, which is in turn connected to a reducer ■■■■■■ for, you guessed it, a shop vac. Mine is 5.5 horsepower, and it’s plenty.
On top of the plywood, I have foam weatherstripping from home depot laid out in a 24’’ x 18’’ rectangle. This is the exact dimension of the interior of my oven, and as such it is the exact measurement of the frame i use to vac-form. I have two wooden frames made out of wood, connected with metal brackets. The styrene is sandwhiched between them and heated.
Some things I learned:
don’t be afraid to let the plastic really sag and get hot. The vac REALLY helps to cool the plastic, so the hotter the plastic the better.
I was using binder clips at first to hold the frames together, sandwhiching the plastic. This was bad, as the binder clips weren’t big enough and had to be forced on. The heat causes them to pop off with a loud CLANG inside the hot oven. uncool.
PAM is the secret to getting cooled plastic off the proton pack mold. I tore 4 shells before I realized that the plastic was sticking to the pourous surface of the wood. PAM organic cooking spray cured THAT problem.
Spackle is OK to vac form
The spacer really is a pain in the ■■■■ to build
Forgetting to wear gloves before you take out the frame with molten plastic to form = a lot of loud swear words, burned fingers, and a ruined lump of plastic that kind of looks like mt.rushmore
Bondo really is the best substance invented since calorie-free soda
What thickness of plastic are you using? How strong is it when it’s been formed into the pack? I figure you have to have some wood pieces to mount it with, and to provide some structure for the ion gun and the other parts that get attached.
I ordered 3 sheets of .080 gauge styrene from a website I found…I forget exactly which one, but I can find the link if you want (PM me). I actually found it to be a LOT stronger than I envisioned, but I wanted to reinforce it anyway, so I epoxied pieces of plastic to the inside “flat” areas and bondo’d the corners. The only areas that tend to get weak are where the crank generator meets the gunmount (the corner is very thin), and where the right side of the PPD meets the underside of the crank generator (this area ends up being trimmed anyway because it’s where the upper shell meets the lower shell). You just have to be careful releasing the mold from the wood. I used a crowbar like implement I found lying around, and I had to go to each of the sturdier corners (near the top of the upper mold) and gently but firmly lift each corner until finally the whole thing came loose. without PAM it’s impossible, btw, and even with it I usually end up making a little tear on a corner that will need to be bondo’d.
I mount the shells to the mother board with pieces of 2x4. The ion arm is actually very sturdy on it’s own; this is due to the truncated nature of my design. I also figured that a full size ion arm would be really hard to release. I glue it down with some goop after bondo-ing any holes etc, and it’s good to go.
I can’t wait for my 4015 timers to get here so I can finish this project…
Do you remember how much plastic is? I have a plastics place about an hour away but i forget the name but I think they want like 20 bucks a sheet or so for a 4x8. Anyway these look great any plans to sell them for a REASONABLE price?
I think Usplastic.com (that’s where I got my plastic) was around $28 a sheet…I forget the exact dimensions, but I can tell you that each sheet is enough for 6 “plates” of 24’’ x 18’’ (the interior of my oven) with extra left over for fun things like tube plugs and such.
Yeah sorry to dig up and old thread. I was looking for pics of Studio Creation’s packs. I have a 1981 DMC, its under restoration at DPI.
The pack you made is very nice. I set up my own vacuum form table and built and oven. The vacuum part worked well, however I just couldn’t get the plastic to melt (I guess would be the word) enough. I got about half a mold. I ran out of time to work out the bugs. In the winter I will mess with it again.