Y.A.P.B. - Yet another Pack Built (from Germany)

Hello dear GBFans-community.

My name is Stephan and this is the thread of my GB1 proton pack built. The project started nearly 10 years ago in a universe without 3D-printing and Etsy & Co. It started with my scratch-built pack and it was abdandoned when I couldn’t find a solution for making a bumper by myself. 2 kids, new job, restoration of an 105 year old house and tons of “normal” stuff came across and the once obtained parts got covered in dust in the cellar.

The project had ROSC (return of spontaneous circulation … the EMS-personell knows what I am talking about :lol: ) when I watched GB:Legacy (Afterlife, whatever) and a guy from my main costume community (501st Legion / German Garrison) sold an Ben of Kent-Kit in our internal 501st forums.

I decided to start again and bring my wife one again to the verge of despair!! You know the story :wink:

The plan is to built a “near” GB1-pack. I don’t want a screenaccurate pack, since I think every pack has its own character. It is MY pack, not Peter’s, not Ray’s, not Spengler’s … it is MINE. Of course I do want many of the original parts, but I don’t want to copy a existing pack.

I’m writing this WIP for my own motivation. I don’t want to abandon this lovely project once again. I am just a normal guy who has a normal life and no special skills in modelmaking and I often struggle in finding the correct solution for my actual built-problems. This project keeps me away from my everyday life and make me go back to the great time of my childhood; no Covid, no job-struggles, no problems.

Maybe a few people like to read and can help me with this project while reading this. And maybe others can start their own project and I’d like to share some pictures of my built with this nice community.

So if you are interested, stay with me and feel free to critizise or just read my journey. And remember: the most important thing is, that we alls stay healthy and that we watch our children grow up safely!

Regards

Stephan

So what’s the starting point:

  • scratch built pack made of wood by using Stefan Otto’s plan here on GbFans
  • all aluminium wand by CPU64 (unfortunately withou the cool pop mechanism
  • heavy props sound/light kit and ]GBFans light and sound kit(still not sure which one to use)
  • A.L.I.C.E LC2-frame and gear
  • two R701 Clippard valves
  • the Ben of Kent kit with metal parts (don’t know what KIND of kit it is, though)

Since I like aluminium parts I ordered the aluminium parts from GBFans, but the website told me, that they are pretty busy and that it might take some time to get this stuff over the atlantic ocean.

So pending parts are:

All pictures posted here can be enlarged by clicking on them.

The Packs: Left - my scratch built (YEARS ago); Right - The Ben of Kent

image

So I started to attach the aluminium-board to the A.L.I.C.E-pack by using the spacers, that came along with the Ben of Kent kit. I used 50mm M6 screws with washers. Since I couldn’t find a solution for the top point where to attach the pack I placed it about 20 cm from the top of the motherboard and it worked out well. The lower holes are on the position Stefan Ottos plan suggest.

image

image

The next part seems to be drilling all the holes for all the hoses and valves and whatsoever. I started with the gearbox. I drilled a 6 mm hole for the crank knob right in the center of the upper gear box “field”. I took the crank knob from my old scratch pack. I guess it came from nick-a-tron years ago. I glued a 40 mm M5 thread into the center of the crank knob and it worked out well. I carefully used my Dremel and a 40 grain sanding bit to create the hole for the hose that goes into the gear box. A lot of dust and one hour later the hose slided in nicely. In order to end the hose I heated it up carefully with a heat gun and bent it in the way I needed.

image

The last step for today was the hole for the R701 Clippard valve. A 10 mm hole drilled right in the middle of its designated position an two 5 mm for the 30 mm M4 Allen-screws, that came with the Ben of Kent kit.

image

So far for the first weekend of my pack built! Have a nice week and greetings from Germany!

S.

Just so you’re aware the gbfans n-filter is 3" diameter and the BoK one is only 2.75" so you’ll need to cut the shell to make it fit. If you search for my build thread there are photos of how I did that on my BoK shell. Good luck!