1st Proton Pack - Completed DEC 2012 Merry Xmas

Hey all, where to start…

Well I’ve been over on the UK Ghostbusters site for around 2 months now, I’m a big Ghostbusters fan and grew up with the films and the cartoon. Firstly I always said since I was a kid I’d have a Proton Pack I’m 29 years old and thought “right let’s get this done before I’m 30” along with that in mind, this Halloween I’m arranging a charity party, to raise money for Alzheimer and Dementia research. My grandad passed away 2 years ago with both and now my grandma on the opposite side of the family has been diagnosed with early dementia. It’■■■■■ my dad quite hard with a kind of here we go again feeling, so a pack build with myself has kept him occupied in recent weeks,

So i’m ready to be a Ghostbuster, I did a quick google search only to come across all you crazy guys that have took it to a whole different level and I’m nothing short of amazed and impressed, and hopeful I can create something half decent to the film packs.

Paul (The Rookie)

The first piece to arrive was my Alice Frame it turned out to be an LC-2 with an LC-1 medium pack :slight_smile: It’s marked on the pads and has the distinct 1" offset on the horizontal bar. Something I thought was gonna cost me heavy coming from the US has been one of my cheapest buys at £22 here in the UK, I couldn’t be happier.

For people after Alice Frames be sure if you do a search on EBAY to check all the recommended search fields at the top of the page as I found this under Camping Equipment with no mention of the ALICE frame just that it was a US backpack for sale.

image

1 Like

The build has been underway for the best part of a month maybe a little bit longer so here’s how it all began.

I ordered a great shell from a UK seller over at UK Ghostbuster called Quagmire, unfortunately it arrived as I was heading of to work one day and I didn’t have time to open it. After a teasingly long day I got home, tore straight into the box, into the garage onto my feeble excise of a work bench.

This shell looks awesome, so please with her and can’t thank Quagmire enough worth every penny and an awesome guy to deal with.

The Quagmire Shell

First thing I did was to remove the side fins for the HGA to fit. I noticed some people have a a little bit of the fins over the edge but I choose to remove them completely and round the tops off. I still have the removed bits which I’ll probably shorten, glue and fill after test fitting the HGA.

Worth mentioning this stage was very daunting for me, I’ve got very little if any experience at all with modelling, tools and prop building but I bit the bullet and dove in. With a bit of cutting and sanding it all came out good.

Fins

So Quagmire is very kind and provides the ion arm box with his shells unfortunately for me it was slightly too small to fit my JT ion arm cap. What to do, what to do?

Ion Arm

3 bits of diabond cut to size and epoxyed on little bit of filler and sanding smooth and jobs a good un. No filler or sanding shown in these photos though :wink:

Ion Arm Modified

Next up myself and my dad cut and drilled the injector tubes, booster tube, drilled some holes for some of the cap head screws and dry fitted some of the parts nothing is screwed down here except the booster tube to the shell every thing else is just lying in place just so I could get more excited about building this pack :slight_smile:

Cutting and Dry Fitting

That was after about 5 days of work,.

Completed the Ion Arm next along with my bargain resistors off the net for $6 including the postage. I’d orginally planned on using some resin ones I’d got from Nickatron but as the packs moved on I’ve found myself upgrading things resistors, dixie cup bracket for a real v-hook etc

Worth mentioning here that the pack had been sanded back, filled in places, re-sanded and primed for new paint.

Front

Side 1

Side 2

Yesterday (Wednesday) I repainted the shell with a satin matt finish attached the ion arm, booster frame and my Nickatron HGA I’d mucked up when I ordered this and got the semi-hero cast so have removed the casted socket head screws and replace them with some real one. The power cell and cyclotron lenses got stuck in next and some other bits just in place for show at the minute and testing :slight_smile:

I’ve also purchased a Nickatron gun kit it’s fair to say I’m more daunted by the thrower than the pack after it arrived :?

This brings me nicely on to tonight where I’ve managed to get the red stripe done round the N-Filter using some pinstripe tape and filled the holes with mesh painted white, quick question though does anything go inside the N-Filter? I’ve heard wire wool was possibly used?

Next up my nickatron bumper arrived this morning, I did have a bumper bought from Ebay and a trusted seller known to these forums and the UK his work is top notch but unfortunately it didn’t quite fit my shell. After work today I wasted little time in getting it lined up, drilled and screwed into place, tomorrow I’ll sand it down get some more primer and get it painted up, it fits like a glove.

Things seem to be falling into place nicely and this site and and the UK one has been fantastic during my research and build tips for the pack :slight_smile:

Thanks for checking it out so far.

Paul

Envy!

I’m finishing the collection of parts at the mo and can’t wait to get started. You lucky sod you :slight_smile:

Check here:

http://www.gbfans.com/image.php?url=/images/equipment/reference/33/251.jpg

Looks like wire wool or maybe some silver/grey filter material

Lawrence

just a question, do u still have the bumper that didnt fit ur shell ? coz im scratchbuilding mine atm (50% done atm) and buying a cheap bumper would save scratchbuilding 1 :slight_smile:

if u dont have it thats ok i’ll eventually build 1

Yeah sure I’ve still got it I was going to offer it up for sale on the UKGB forums over the weekend. I’ll post some pics up there of it and an asking price once I’ve worked out postage :slight_smile:

I’d be interested so I’ll keep eyes open over there

Great looking build! Glad I could help out :slight_smile:

So I’ve got a couple of days off work, today and tomorrow hoping to get a few bits done on the pack and maybe start the thrower construction.

I’ve went for a cheap option with the shockmount after scowering the various forums for tips on making one. I came across a method of using pipe with curtain rings threaded onto it which I preferred over the stacked washer option but then decided to combine the two losing the pipe for smaller washers in the centre of very thin curtain rings.

All the bits totaling £2.67

image

Shockmount

image

image

Bit of brass paint and shoe polish to dirty it up and I’m quite happy with the outcome, probably a piece that in the future will be upgraded but for now it’ll do :slight_smile:

great idea on the shock mount what size curtain rings did u use

It’s great took my a while to amass the pieces too and I’ve found myself still going during the build upgrading resin parts for real ones for example on the resistors, I think this will continue even after the pack is done :-?

I’ll send a pack with your bumper and other bits free of charge as I’ve got a pack left over. PM’d you on UKGB.

Would you consider making one for sale?

Sent from my T-Mobile G2 using Ghostbusters Fans on Android

So the packs been well underway the last few weeks and is pretty much finished with the exception of needing to rust the mounting screws, and cut the hole for the hose. I’ve got a full CRIX light and sound kit with an 7w amp ready to be all wired up and 9 days left before the Halloween party to do this and complete the thrower, full week off next week though it’s going to be tight!

Few shots of the progress in the last few weeks.

15/10/12

15/10/12

16/10/12

Cut my own aluminum motherboard which was a daunting task but really successful and mounted the ALICE Frame.

16/10/12

Couple of shots of the pack and started the thrower tonight. Few little jobs left on the pack…

Rust the mounting screws and washers

Change the foil gearbox label for a matt one (more accurate?)

Add the dry rub transfer for the little red circuit on the n-filter

Cut and shape the space for the hose connection

24/10/12

24/10/12

The daunting electronics task will be underway after completion of the thrower in the next few days.

9 days and counting :?

Clark

Nice build! One suggestion though, Cut the Foam padding on the ALICE frame down a little on each end, it should be about 1" past the straps on each side. Also use black gaffer tape instead of silver, makes it a little less eyecatching and accurate :slight_smile:

Cheers Nick I’ll get this done in the next few days need to pick up some black tape.