Ebay auction for sanyo calc just ended. Just wondering if anyone from here was the money bags who won it…
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=200225196979
Ebay auction for sanyo calc just ended. Just wondering if anyone from here was the money bags who won it…
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=200225196979
I can’t view eBay at work.. but if it was really expensive.. I doubt someone on here won it.
Those calculators are worth a lot to vintage electronics collectors.
Hardly worthwhile to take a $50-100+ calculator and strap it to your belt.
I wouldn’t bid on one on E-Bay unless I was absolutely sure of it’s internals. Even then I wouldn’t pay more than a few bucks for it. The circuit boards never lit up in the movie so a static replica alternative is just fine for me.
moreover, I feel there’s calculator collectors out there willing to overbid me anytime… what I’d be after is a broken one, so gutting it wouldn’t hurt anyone (particularly my wallet)
This said, I too think an alternative board is more then OK.
Calculator collectors? Really?
Man I guess if it was made or thought of, someone collects it.
Dosn’t really make sense to pay ridiculous amounts of money to something you’re just gonna tear up and most people arn’t even gonna recognise if it’s on your belt or not.
Screen Accuracy doesn’t come cheap.
But screen accuracy could be just a plain simple static one. Does excactly the same job at a much more reasonable price.
Since it’s the wrong calculator smart move, the internals of the that model are different or at least everyone I have opened is…
I own three of the above in question 82D calculators and trust me they are FAR from movie accurate internals… It’s the wrong model number, regardless of it’s outside similar appearance…
People need to realize and accept what I have preached in other threads about these calculators, it what the VERY early stages of microchips, technology was changing daily… And because of this the circuit boards on these early model devices were being changed constantly taking advantage of newer cheaper technology, while they retained the same shell and model number! Truth is these damn calculators retailed at almost $1000 when they were sold in the 70s, trust me everything was being done to lower cost so they could expand the market, as the only people buying $1000 calculators in the early 70s were big business or the wealthy…
Forget the model number and/or external looks of these devices, if you are going to pay a high price and bid sight unseen for one you are playing Russian Roulette with the internals…
As has been documented by fellow prop builders even the “right” model number calculator went through revisions and moved from the gas discharge tubes to LEDs as the technology evolved… So even if you got the right model number it could be wrong internally, get a different model number and the chances of it being wrong are even greater…
Again and please take it to heart unless you have the excess money to spend and don’t care what the outcome is, purchasing these calculators is simply playing Russian Roulette…
And yes you will have to fight with calculator collectors, it’s a growing hobby and the vintage rare models like this are in high demand… Look at the winning bidders feedback for March and April they are a collector…
So not only do we have to compete with other Ghostbuster prop builders we also gotta fight calculator collectors. ![]()
Welcome to prop building with found parts…
Just mention “Graflex” or “Eumig” to any Star Wars prop builder and you will get the harsh reality of vintage collectors vs prop builders and how ugly it can get… A $10 nobody wants item can shoot to a $500 everyone wants item in literally one day…
Sadly this brings up the issue where a lot of sources and information is not released to the masses (public) as history has shown that in almost all cases when goodwill sharing of information is shared it simply artificially inflates the price (sometimes ludicrously) regardless of the good intent…
Point in case I paid almost $300 for my first Eumig camera when it was discovered, and sold it for what I paid to another prop builder just to unload it… And then replaced it 6 months later for a 99 cent opening bid, uncontested, once the smoke cleared from the initial discovery… The feeding frenzy to obtain items sometimes gets out of hand, even with the damn Iona shoe polishers, they are hardly rare but sometimes they go for huge amounts on Ebay while I have personally purchased them for that 99 cent opening bid with no contest on Ebay and/or a few dollars at the Goodwill store…
I might also mention that the 1959 Cadillac used to make the Ectomobiles is highly valued by those people who buy hearses to just drive around, and who would probably keel over in horror if you mention that you are just buying it to make an Ectomobile.
…
That’s why I want to use a truck for mine.
Krups cofina grinder
Torin Blower (instead of collectors, its scuba divers propmakers fight against)
Torr Relays
Racal minilite microphones
Kango drill
Praco flashmaker
There’s lots of rare found items that became goldmines of vultures around the web… Some fandom have open wars on parts, a LOT worst then Star Wars or Ghostbusters.
I am the proud owner of a Graflex 3-cell original flashgun that had been modified to 4-cells. (go figure what photographers were doing in those days) I paid the big price, before replica flashguns started to sell.
I am also the proud owner of a screen-accurate-and-still-fully-functionnal krups - this one I got for a steal price thanks for someone trying to buy out. I could make 2000% profit on that one anytime if I wanted to (no joke, it sells online 20 times what I paid for, easy)
Somehow, I can’t get to rip collectors off rare items unless they are defective, particularly if I’m to fight them and pay big bucks, only to use parts of it. Its cheaper to make the replica from scratch - in the example of the calculator circuit, one could have PCBs etched and parts soldered for less then the price of the original calculator off ebay… or could simply get it for dirt cheap at a local garage sale.
Or not worry about being that screen accurate being that the pack isn’t 100% accurate anyway.
Propmaking is fun, ain’t it?
Does anybody know the model number of the calc used? as i have found a calc bt not sure if its the right one
thanks
Does anybody know the model number of the calc used? as i have found a calc bt not sure if its the right one
thanks
erm… as mentionned already, even if it is the same model number, it might not be the right one…
People need to realize and accept what I have preached in other threads about these calculators, it what the VERY early stages of microchips, technology was changing daily… And because of this* the circuit boards on these early model devices were being changed constantly taking advantage of newer cheaper technology, while they retained the same shell and model number!* Truth is these damn calculators retailed at almost $1000 when they were sold in the 70s, trust me everything was being done to lower cost so they could expand the market, as the only people buying $1000 calculators in the early 70s were big business or the wealthy…
Forget the model number and/or external looks of these devices, if you are going to pay a high price and bid sight unseen for one you are playing Russian Roulette with the internals…
Does anybody know the model number of the calc used?
IMO no, no one knows or at least has made public the correct model number AND manufacture date…
The one listed on this site under equipment is “close” but it still varies from the one seen on screen…
The one used on screen is probably a VERY early build (low serial early build date) of any of the similar Sanyo calculators sold at that time… Although that is just an educated guess…
As I have said multiple times there is no right or wrong model number, you simply have to roll the dice and hope that the one you purchase has the right guts, some model numbers have been found to have closer insides then others… The model number of the one in the auction in this thread to the best of my knowledge was a later model and no one that I am aware of has found a close board inside it… Off the top of my head I believe it’s only a two “white” chip board… Like I said I have three of the same model as the ones in this auction and they are all internally the same but not anywhere near what was seen on screen… Trust me if it was the right model number I (and others) would have paid a lot more then it went for…
Also here is a side by side comparison of updated guts, notice the area I have highlighted in the updated board, to date I don’t believe anyone has found the correct board with the proper components in that area… The one on the LEFT is the closest configuration found to my knowledge, I have the identical board…
And if anyone is curious, again the one in the auction above ICC-82D is totally the wrong calculator…
Here is a side by side of the ICC-82D with the proper board… As you can see no where near the same except for the unique white ICs…
The nixies are pretty unique…thats the first thing i look for. I can see how the circuit boards are pretty hit or miss…
-g
The more I look at it, I feel like you could do a scratch build from an old NES game cartridge. Exo, can you post a pic of the correct circuit board next to one?
-g
The more I look at it, I feel like you could do a scratch build from an old NES game cartridge. Exo, can you post a pic of the correct circuit board next to one?
Sorry don’t have any NES cartridges laying around, I have posted the dimensions for the board in another thread so you can compare…
[quote]
The nixies are pretty unique…thats the first thing i look for.
[quote]
All calculators from that time period had nixie or gas discharge tubes not real unique in themselves…