I have built a screen acurate ghost trap and pack. The trap I built from a combination of Stefan and Norm Gagnon’s trap blueprints (thanks guys for the excellent detail in these plans by-the-way). It is mostly basswood. I am now trying to draw up a circuit board scheme, that will control a servo to throw open the doors, light my leds in the front display, light some flashlight bulbs (powered by 3 C cell batteries hidden in a “false bottom” in the trap cartridge), trigger a sound chip also in the false bottom, and I need it to do all of this in sequence when triggered by an open/closed switch in the foot pedal. Then I would like it to do all of this in reverse sequence when the pedal is raised. I have all year to figure this out, so if anyone has any good leads on advanced circuit board design, or better yet, if anyone has tried this or something similar and has any good tips, I’d totally appreciate any feedback. Thanks.
I dreamt up a killer design for the ghost trap involving a mini-smoke machine, blue and white LED’s when the trap opens, and orange and red LED when it’s pulling a ghost in, and closing. It’s in the early stages right now, but I have a friend who designs circuit boards as a hobby(!) And we are collaborating on all the Ghostbuster gadgets. If we get anything figured out on it soon, I’ll PM you the preliminary design. From what I know about electronics, you wouldn’t need a very large board to accomplish this, especially if you have a microprocessor installed to orchestrate all these functions that you mentioned.
What about the time delay though? I don’t want them firing all at the same time when I stomp on the pedal. I want them to “go off” in sequence. And I had thought about some onboard smoke machine too. There’s some really good references here: http://www.halloweenmonsterlist.info/. These guys are frickin hardcore and have some great ideas. I’m not a novice, so please don’t be afraid to speak to me in technical terms. I can figure them out. After the trap closes I thought I’d incorperate another sound chip or circuit board that only registers the “green lights” (when the light is Green, the trap is clean), after all the pyrotechnics are done and the doors close, displaying just a green light on the front display and smoke coming out of the trap doors itself. Any ideas?
Well, we can all dream…and I hope this dream comes true for you. I might suggest that you take the smoker unit out for now. Others here have posted about the minature fogging devices, but the price tag alone would fund a third-world family of six. Here’s a reference:
http://djshopping.com/clf-9000.html
So without that aspect, for now, you most likely are looking at a multifunctional design that will incorporate lights, PWM, timing and sound. I would start looking at higher-end PIC or microprocessors. I know for a fact that PIC’s, like the PIC16F88, can probably handle all of your requirements (go here for more information and the white sheet: http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1335&dDocName=en010243)
However, doing so opens up another gigantic can of worms. Programming language is required as well as a compiler, software and a seperate board for “burning” the datum onto the PIC itself. If you truly have the ability to accomplish the effort required, then more power to you. For example, I know that it took Exoray about a year to go from concept design/theory to mass produced kit for his recent wand light kits, and he knows what he’s doing when it come to electronics. I for one am an amateur when it comes to electronics, and that same board design would probably take me three to five years to develop and master.
So I guess my advice is this: If you have an excellent understanding of electronics, have about $500+ to commit to this project, will work on it at least once a week for the next year, then you most likely will find your efforts fruitful. I’m not trying to be negative here, just pointing out the hard facts about the difficulty of the board. Because adding a sequenced light kit to a trap is one thing. Adding servoes, PWM, sound and timing–let alone a smoker–all controlled by a N.O. switch, is something completely different.
My hat’s off to you if you choose to do so.
Brock
phantom50
Wow. Negative Nelly in Sector Three!! ![]()
I can’t speak for myself. I’m the wood and nails guy. But, yes, my friend Dave is fully fluent in the language required to program the microprocessor. And he already has the tools to do it. Not saying that we’ll get the trap completed next week or anything. Baby steps…baby steps. But we are going to get to it eventually.
And I agree with you on the smoke machine. The majority of the smoke pours out of it when there’s a ghost inside and it’s being CARRIED. The smoke when it opens and closes is actually minimal.
~5B