I’ve been in the game for a few years. I originally started on this site in approximately 2005-2006. Having been a Ghostbusters fan my entire life I had always had a fascination with the traps and proton packs. I built my first trap in 1986 with my father for Halloween. Probably more accurately stated, my father built my first trap in 1986 for Halloween :).
When I discovered what was possible, and how much work had been done by the community I was pretty impressed. It has taken me a long time to realize the dream and actually begin building a Proton Pack, but after a couple of false starts I’m on my way.
Right now I have two shells, an Exoray V-71 MarkX, and a Bigi330 shell purchased from noslliT here on the forum. I think it’s interesting how the bar has continued to move forward, and the various debates that go on the board here about what is more accurate vs. what is more convenient or affordable. I’ve got pictures of both shells side by side to show some comparisons in the details. While they are essentially the same, the Exoray shell appears to be overall more straight, and the angles are sharper. I’m not trying to say it’s better; on the contrary I’m saying that it looks more like it came off the assembly line at a factory versus the Bigi shell which looks more like it was cooked up by Egon in the Ghostbuster laboratory. More screen accurate perhaps, but it’s a slippery slope between screen accurate and aesthetically pleasing in my opinion. I think there’s room for both approaches, and I’m excited to try two different styles of builds with these different shells.
Exoray shell with one of my Matty Collector Ghost traps
Comparison photo, Exoray shell on the left and Bigi330 shell on the right.
Right now I am working on the Exoray shell, and it will be my first “complete” build. I say “complete” because after reading these forums I realize that no pack is ever truly safe/finished. I’m planning on setting it up Ghostbusters 2 style at the moment. Someday I would like to go in the direction of a video game pack with it, but for now the first goal is to go GB2 style. I’ve been amassing parts at a somewhat staggering rate (just ask the sellers on here, they can attest to this) for both shells. The first thing I noticed when comparing the two shells is that the Exoray is significantly thicker and heavier. When I wear one to the GB3 opening, I expect I will probably take the Exoray as it looks a bit more durable.
Rub a dub dub… Proton Pack in the tub! Cleaning up any excess mold release on the Exoray shell.
So far I have the following:
Exoray V71X shell
MMM motherboard (trimmed by hand to fit)
LC-1 style pack frame
Exoray ION arm (resin)
GB2 style real resistors; (I have excess of these, some from AJ and some from MMM)
Dale RH-50
Sage silohm 25
Dale PH-25
Clippard R701 and R331s from GBFans store
Exoray resin bumper (Extremely nice piece, almost identical to the Bigi/Nickatron)
Spectrastrip cable (Ebay)
aluminum shock mount/bellows (Ebay, but I’d REALLY like something better)
Cable clamp (MMM)
Exoray 3" N-Filter
HGA:
GBFans/AJ new run aluminum HGA (very nice)
Vincenzo aluminum booster tubes
Booster ladder frame (AJ/GBFans casting)
5/32" SMC elbows (MMM)
5/32" SMC straights (MMM)
GB2 style Clippard brass elbows and barbs (MMM)
GBFans aluminum beam line & filter tubes
Exoray booster tube (PVC)
Booster tube plug (Resin, purchased in 2007 from a now banned seller)
Crank knob (black resin, from aforementioned banned seller)
Throwing Chicken v3 kit w/ forward assembly (LOVE it)
GBFans acrylic tube
noslliT power cell and cyclotron lenses
gEkX hardware sets
pack x 1
throwing chicken wand x 1
Sound Board (AJ/GBFans)
I also just put down the $$ for GhostGuy’s Mighty Microcontroller. I may also end up picking up a Crix or Jupiter Light kit to get past the Halloween holiday if necessary.
I haven’t started the build phase for the second pack yet, but here is what I have amassed for it so far. I plan on trying to be more screen accurate with a weathered look in Ghostbusters 1 style for this pack, as opposed to the freshly manufactured Ghostbusters 2 look for the Exoray shell.
Bigi330/Vincenzo Shell
Bigi330/Vincenzo motherboard
LC-1 frame, accurate LC-1 straps from gEkX (need a kidney pad…)
Anhcon’s:
aluminum Injector tubes
aluminum Booster tube/plug
aluminum HGA
aluminum N-Filter
aluminum vac line
aluminum beam line & filler tube
Cable clamps
aluminum ppd
ION Rod (GB1 style)
Booster Ladder Frame (Nick-a-tron, thanks Mr. Tillson)
aluminum ION arm assembly (CPU64, by way of Mr. Tillson)
GB1 style real resistors installed (Thanks Mr. Tillson)
Clippard R701 and R331s from GBFans store
5/32" SMC elbows (MMM)
5/32" SMC straights (MMM)
GB1 style Clippard brass elbows and barbs (MMM)
I’m in the market for some real Legris fittings for this pack…
aluminum shock mount/bellows (Ebay, but I’d like something better…)
Bumper (Nickatron/Bigi330)
GB1 cable (GBFans/Blkmesahero)
CPU64 aluminum thrower (TRYING to get on the waiting list …)
Anhcon’s: (Ordered/paid)
Rear cylinder
Front cylinder
Gun track
V-Hook (GB1 style)
Trigger Tip/Forward Handle assembly
GB1 banjo tips
aluminum gun knobs/regulator knobs
loom locking system
b0bamatt labels from the August 2012 run
gEkX hardware sets
pack x 1
CPU64 wand x 1
Sound Board (AJ/GBFans)
GBFans Pack Blaster boards, Exoray shell with first coat of primer, and Blkmesahero GB1 ribbon cable.
Part of this is an experiment in terms of parts ordering, for instance I will actually have 3 sets of Injector tubes once my order from Franchesky comes in. It has slowed me down in the building process because I’ve been evaluating the different parts and trying to decide which ones I like best, and which ones fit each build best. Right now I am planning on using Franchesky’s parts for the GB1 build, so I have listed them accordingly above. I will be taking a metric s***load of pictures through this process to give people an idea of the difference between the various parts. I will try to document some of the mundane details that some of the experienced guys on here take for granted. I’m a total newbie when it comes to prop building, but I’m an IT “Engineer” by trade so I’m fairly good at the details.
Hopefully you guys find this interesting, I’ll have more to report soon
Cheers,
Dan