Like most of us I got my Matty trap, and want a holster for it, well while rewatching Ghostbusters SLC I thought it would be great to do a tactial looking holster. Before I started I thought I should make a turtotial out of it so others could have one too if desired. When finished it wil look like this.

First a few potential questions you might have.
How hard is this to do? It’s really easy, if you can sew a patch on your costume well enough so it doesn’t come off in the wash then thats more than good enough. (Seriously a kid could sew this thing together)
How long does it take? I did this in an evening, I also hand sewed it, chatted online with a friend, took pics and did the drawings for the tutorial, so it should take you signifigantly less time, especially if you have a sewing machine.
How much does it cost? For me it was free I had more than enough stuff laying around the house to make it, but if you had to go out and buy everything it will propbably cost about 10 dollars, that for all materials involved so the more you already have obvioulsy the cheaper it will be.
Why make a holster like this? Its secure, looks resonably good, its cheap, and if you’re like me and have anything else on your belt made of this type of material it will all match (my camera case and PKE holster). Also this setup will work for any trap, not just the matty one, so your not limited to what connectors other traps might have (V hook, dixie bracket, picture hanger ect…) This allows for a comletely unmodified trap, and I know a fair few of you are looking to have that in a holster option.
Materials:
Black strapping (get these from the camping section of walmart, you can probably get away with just one but you’ll be cutting it close so but two, and if you do the alternate method at the bottom of the post, which I recomend, you’ll definatly need two)

Buckles (these also come from the camping section of walmart, and they are super cheap. I only used one but yet again if you do the recomemnded method you will use 3, and they come in packs of 2 so get 2 packs, and you’ll have one spare for whatever)

Needle (regular sewing needle)
Thread (plain black thread)
Lighter (This lets you melt the ends of the strapping so the won’t fray after you cut them)
Safty Pin (sewing the strapping can be hard at first only because it likes to move around, but you can show it who’s the boss, Tony Danza!, no you are, just pin that sucker down)
Alright lets get this thing started, I know it can be hard to make out whats going on with all the black straping so I drew a picture to show you how it will be when asembled.

First step is to figure out how big to make the belt loop, and pin it in place. Pretty easy huh? Also a note the strapping that I am using for the vertical is wider than the normal walmart strapping, I don’t know where it came from it was just laying around, but I do believe walmart has started carrying larger strapping so if you like the look you should be able to get something comperable.
Now that its pinned lets sew that bad boy. I recomend sewing it like this.

When sewing make the square shape out of one run of thread and each leg of the X out of their own separate peices, it may be a bit more time consuming but it also means that 3 separate threads will have to break and come unstiched and that is very unlikely without you noticing first (also I’m paranoid so I double stich everything, so even if ur sewing sucks you make up for it by shear amound of thread going through the piece). Sew all of the points in the holster this way. Sorry I don’t have a pick of my sewing, the black threads blend so well with the strap that its hard to see most of them in person let alone on camera.
Next figure out how far down you want the trap to sit on ur leg and how far up the front of the trap you want it to go.

Once you figure out how long the strapping will be cut it to lenght and melt the end with a lighter to keep it from fraying. Also when mesuring be sure to measure enough strap to loop aroung the bottom horizontal strap.

Also if you don’t want to cover up your pretty bar graph you and run a double set of straps on either side of the bar graph like so.

Now that, that’s settled sew up the loop useing the box(xy) square method. Then proceed to get the first horizontal strap ready.
Sew the adjuster that came with one of the buckles to some of the strapping

and thread it through the front loop we sewed and adjust it to fit the trap, cut and burn excess strapping ( I recomend leaveing a fair bit though for adjustment purposes) Then sew it to the back side of the vertical strap.

The process is the same for the top strap except we’ll be useing the buckle itself not the adjuster. Sew on the side of the buckle that doesn’t have the adjuster built in, thread the strapping through the otherside of the buckle. sew it on to the back of the vertical strap after deciding where it should go, then cut and burn the end and you’ll be done.


Congratulations, you just made a trap holster and it should look like this when done.

And here is me wearing it.
Empty

Full

You can also add a thigh strap
Empty

Full

And either hook the pretend ribbon cable over the trap handle

Or add a small carribeaner to it


and the hook the pedal to the top horizontal strap so you can show off those sexy trap doors ![]()

Ok, and now for a different way to do it.

As you can see there is now a buckle just below the belt loop on the vertical, this allows for you to put the hoster on after you get suited up, and lets you adjust how far down your leg the trap sits, it also has a sewed in thigh strap for extra security. Also if you want you can replace the adjuster on the lower strap with another buckle ( I know you 'll have that spare one :P) so the trap is easier to remove.
So there you have it guys, thanks for reading and I hope it was helpfull, and sorry about some of the blurry pics, I’m not a good photographer. Thoughts, Ideas, Comments, Questions?