Gorilla glue or epoxy?

Any advice on the benefits or disadvantages of using Gorilla glue vs. epoxy? Specifically, I need to attach the various MMM resin parts (ion arm, booster frame, HGA, crank generator, etc.) to my resin shell.

I know Gorilla glue has a tendency to foam, but it’s also pretty durable. I don’t have much experience with epoxy, so any recommendations are appreciated. I’m trying to build my pack to last and take a beating (since I probably won’t be sober when I’m wearing it). Thanks!

i highly recomend a two-part epoxy. anytime i need super strength adhesive i go with that. i used it a fair bit on my pack, cuz i’m in the same boat as you [usually not sober by the end of the night]. however, my buddy used gorilla glue on his pack, and swears by it. i say use what ever you’re most comfortable with.

I say why choose? I use gorilla glue for stuff that you won’t be able to see from the outside (i.e. the construction of my spacer) and some industrial strength stuff I got at Lowe’s for stuff that you might be able to see.

Gorilla Glue Expands and sands well, so if you ever need something to fill a gap, it works wonders. However, it does take 10 hours to drive, and due to the expansion it can spread to places you don’t particularly want it. Also- it’s always a good idea to clamp what’s being glued down or weigh it down if it’s light weight and it is exceptionally easy to overuse.

Epoxy often works quicker [depending on variety] and can be stronger. However- if you’re not good at mixing things together to a specific amount, then it might be best to stick with the Gorilla Glue.

There are specific types of epoxy depending on what you are trying to glue together. Try and find a plastic to plastic type. Some plastic to plastics actually weld the parts together rather than just forming a layer of glue between the two parts.

I also support the use of a 2 part epoxy. There are a variety of choices with respect to curing times, so purchase one that your comfortable. I usually have two at all times (1-minute cure and 5 minute cure).

The 1-minute cure epoxy is also perfect for instant repairs on the go as well.

Thanks for all the good advice. Any specific brands that are recommended? I have access to Menards (like a Lowes or Home Depot) and of course Wal-Mart. Is the plastic epoxy typically sold at a hobby shop, or could I find it at the hardware store?

I use mostly 2 part epoxy,clean and simple to use.if not careful,Gorilla Glue can make for a whole lot of extra work due to the way it expands.I was horrified the first time I used it as to how much it expands although with some patience you can simulate a decent weld bead with the stuff.I get my epoxy at Meijers which is basically a Wal-mart type store.I think it’s Loctite brand ? but not positive.

Epoxy. No Question about it. Gorilla Glue is great if you clamp it together with a huge amount of force for a few hours.. Epoxy will set no matter what , clamped or not.. underwater or not.. on fire or not… it will set..

go for the 5 minute epoxy mixes, sometimes the 30 minute ones can take forever to cure (forever to me is 30 minutes when in want to handle something i just glued)

You can get any brand. Just make sure you get a 2 part epoxy. Should look like someone stuck two fat syringes together.

You know, after my experience with Gorrilla Tape’s adhesive failing and turning into a sticky goo after a couple months, I’m gonna have to say you should stay away from Gorilla-anything.

Oh and as for glue, I use Loctite Power Grab. I bought it at the suggestion of a guy at Home Depot after I asked for something which would hold well and wouldn’t have all kinds of fumes to deal with since I’d be building my stuff indoors. So far it’s served me well. I glued two pieces of PVC together for one of the lenses on my ecto goggles and after letting it set for a few hours I tried to wrench them apart with my hands and was unable to.

Thanks for the words. I used the 2 part epoxy to mold the blue acrylic strip to back of my pack, and gorilla glue with red flashlight lenses on the cyclotron. So far it seems to work out. I’ll use the epoxy on the rest of the resin parts (when they arrive…)