Heavy Props Slime Blower Light Kit! (Round 2 now open!)

Seller Information:

-Kristopher Marshall

-Denver, CO, USA

-CrixMorshullyATgmailDOTcom

Like my kits? Want to know all the up-to-the-minute details about future kits? Like ‘Heavy Props’ on Facebook here:

http://www.facebook.com/HeavyProps

This was kind of a side project, but I’ve had a lot of messages about it!

Slime Blower Light Kit!

The slime blowers in the film had a powercell which was almost certainly taken from or made using the same circuit as the powercells on the proton packs, with some other lights added in across the prop. I aimed to replicate it as closely as possible, using the same ‘warm white’ LEDs that I use on my pack lights. This was especially important to me, since the lights on the slime blower’s powercell aren’t hidden behind a piece of acrylic, or something similar.

There are 6 additional LEDs, one for the side of the powercell’s project box, 2 for the small project box on the other side, and 3 for the gun.

Wire lengths for the additional LEDs and switch are as follows:

To the small project box: 4 feet

To the gun: ~7 feet

To the side of the main box: 3-4 inches

(measurements taken from FunkPunkTwang’s gorgeous slime blower, using the reasonable routes through the misc. tubes across the blower and rounding up by 6-8 inches to allow for some extra leeway. No trenching through your main tanks necessary!)

What’s included!

Main board

1 small LED cable

2 medium LED cables

3 long LED cables

1 long switch cable

The main board fits in the large project box with PLENTY of room to spare. You’ll need to modify the battery compartment a bit to center it properly, but there is plenty of space in the project box to fit a 9v battery. The board can safely handle up to 12v, if you decide to power it a different way, though!

Slime Blower Sound Kit!

This is the same sound kit I offered a few months back, the sound layouts are the same, and since the slime blower’s sounds are activated separately from the light animations, it saves a lot of complex wiring!

Also in the picture are the On/On switches pre-wired for your sound kit that are included free with purchase of both kits.

Pricing!

Slime Blower Light Kit - $90

Slime Blower Sound Kit - $40

Shipping:

USA: $5

Intl.: $15

BUNDLE DEAL:

Purchase both the light kit and sound kit for $120+shipping ($10 savings!) and receive two On/On toggle switches pre-wired for the sound kit free! This bundle is plug-n-play, no soldering needed!

If you have purchased my slime blower sound kit already, I’ll happily honor the discount and free switches. Just let me know when you order!

Availability!

I currently have 10 light kits ready to ship this week, sound kits are in stock as well. If there is sufficient interest, I can order more light kits. Please POST IN THIS THREAD if you are interested, and I’ll get you on the list, even if the initial 10 is full.

  1. FunkPunkTwang (Paid)

  2. brandanthecarpathian (Paid)

  3. Dr.Dion (Paid)

  4. ShodanMark (Paid)

  5. Tyrael

  6. Irricanian (Paid)

  7. JoeLuna33 (Paid)

  8. gboy6 (Paid)

  9. exo95er (Paid)

  10. skeg_man (Paid)

Interest:

Got the sound kit, time to round out the set! Won’t be able to pay till the 15th, though. :-/

I’m in for 1 set Kris (just the lights, I already have the sound board) , so do we use a yellow lens for the scrolling LED’s?

Great looking kit by the way :cool:

Thanks

I dont have the money now but I swear im on board for the NEXT run FOR SURE!!!

Crix, I’m in for both.

PM sent earlier today.

I’m interested in both, the light an the sound kit.

Sent from my PKE Glacier

Put me down for a set (lights and sound).

WOW That filled up fast!

There’s only one slot left!

I’m sending PMs to everyone now.

If you miss out on the first run here, I’ll be ordering a few more boards, so put your name down and I’ll get ya a message out when they’re on their way in!

Interestingly enough, the original packs just had the bulbs sticking directly out of the project box, no lenses or filters or anything.

Of course, now that I go looking, I can’t find the specific picture I was using for reference, but the holes are all very poorly spaced and obviously drilled by hand.

In some scenes, they definitely do look a lot more yellow than they should, I’d blame it on camera filters, personally. :slight_smile:

Damn you… Take my money!! full set… International post.. Cheers

Sent from my GT-I9000 using Ghostbusters Fans on Android

Definitely put me down for a set (lights and sound) when you do another run!

Just curious if you have shipped these yet? :slight_smile:

I would love a light/sound kit for the blower if they are still available.

All of the kits went to the post office this evening. These are all going Priority, so you should see them arriving in the next 2-3 days.

I’ll be reopening orders for these once I get the shipping notification for my next order of boards. I’ll post an update both here in this thread and on the Facebook group once I do. :slight_smile:

Just got the light kit in the mail yesterday and I LOVE IT. The bulbs are bright without being harsh and a little translucent yellow Tamiya on the power cell gives it the perfect shade seen on screen!

I was thinking the same thing with the trans yellow… Crix, did you find thoses pics you used for ref? would like to see the incandesent globes used.. b4 painting mine yellow…

Sent from my GT-I9000 using Ghostbusters Fans on Android

The photo that best shows the rear of the slime blower is here:

http://shawnswift.com/gb/GB2HD/slides/GB2-HD-Ref-100.html

There’s a ton of other great pictures through that album, but most of them obscure the bargraph a bit.

They’re definitely not as yellow as yellow LEDs would be, but in that picture, they do look a more yellow than the warm white LEDs I use are. When watching the movie though, they don’t look quite so yellow.

It was a tough decision. :slight_smile:

I am also interested in a slimeblower light and sound kit!!

The new batch of boards should be sitting in my mailbox this afternoon, once I’m caught up with Pack Gun Lights, I’ll be opening another run of these, stay tuned!