Hi, This is LeonardD. I have a new a.l.i.c.e pack frame with straps, but can’t figure out a good way to put holes in the frame, without breaking it, and then attach it to the main pack. Can someone tell me the best way to do so?
hey, LeonardD
The frame gets attached to the motherboard. There is a crossbar made of spring steel that goes across the middle. I have several frames, and it seems like the crossbar is bowed out differnetly on all of them. If the tubing of the ALICE frame is touching the motherboard, you can use aluminum wire clamps that have screws on either side. I have flattened them out with a hammer to make an almost flat piece of 1/2" wide aluminum with screw holes on either side and screwed it down over the flat cross bar section. I also drilled 1/8" holes and fed zip ties through the motherboard to tie down over the flat crossbar sections.
At the bottom of the ALICE frame are two slits with rounded ends. You can put bolts through them and secure it with a nut on the INSIDE of the pack to the motherboard. I’m doing that with Ryan’s packs this weekend (he has a nice aluminum motherboard with pre-drilled holes. Hope this helps!
i used screws … and u cant break the frame by drilling holes
@bradboos
dont u want to paint the back of the mobo black ?
it is explained in here
I used this method with the spacers (1 inch) and it worked great. I drilled one hole right above the cross beam. the other holes were already there in the alice.
this is a good post, i was wondering the same question.. and I think i like the nylon straps better, they can be cut off at will with ease at anytime
since people cannot read my post and click on a link… here.
there is a a search on this forum. a simple search for what you want will return this, that is how i found it.
Hey, LeonardD again. I appreciate the advice, now here is a new concept. What if you have already attached your alice frame to your pack, which is fully assembled, and the frame brakes then? How would you attached the new frame to the already assembled pack?
I AM TOTALLY STUMPED ON THIS! PLEASE HELP!!
Doesn’t your pack seperate from your motherboard?
More importantly, how is your ALICE frame breaking down? If it’s the straps replace them, but I’ve never heard of a frame falling apart.
If you can’t take the MB off, maybe you could try toggle bolts? I drilled two extra holes in my alice frame and used regular bolts with nuts and washers, then again my pack wasn’t permanently attached to the MB yet.
My pack is a porcalin(sorry, can’t spell word) mold pack I bought from the FOR SALE section .
It had been already assembled and shipped to me. When I opened the package and took the pack out, I noticed the alice frame had 2 holes in the outside bars of the pack, and the left side hole was completely broke in two.
I ordered another frame for it and that is why I wish to know how to attach THIS new frame, so I can do it without breaking it, since I can’t disassemble the pack. And the reason for THAT is, I live in a small redneck town, and I can’t do those kind of things at my mom’s duplex.
u could post pics so we can help
Porcelain?
Like a toilet? I’ve never heard of a pack made of porcelain but damn thats gotta be a heavy pack.
As for attaching a new alice pack to a motherboard you cant remove, I don’t know.
Hey, guys,
This is Leonard. I went ahead and drilled holes in the alice frame, brilliant idea from you guys, and it works just fine. I screwed my screws into the wooden motherboard,which sorry to say I did NOT mention before hand, sorry, and PRESTO, all better. Thank you all for your cool suggestions.
And for the one of you who asked for uploaded pics, my mom owns a camera, but I can’t upload pictures to save my eternal soul! So, like I said, all great ideas, love the help. ![]()