Doug,
I’ve got my own radio, do you offer a build up service? Or a trade in trade up kina thing?
Also, does the charger/cradle work to charge a rechargeable battery? Or is it static?
Sorry if this was covered earlier!
Doug,
I’ve got my own radio, do you offer a build up service? Or a trade in trade up kina thing?
Also, does the charger/cradle work to charge a rechargeable battery? Or is it static?
Sorry if this was covered earlier!
“Extra Static” adds the noise burst prior to each person’s quote, so if there were three quotes (back and forth chatter) in a sequence you will get three noise bursts total during that sequence. Listen to the link on the first page for the “extra Static” and you can here the three noise bursts during that first sequence. If this was the “Regular” version and if the timer started that sequence, only a single noise burst at the beginning would be heard.
“Regular” only adds one “static” at the beginning of any sequence no matter how many quotes are in it, and yes this only occurs if the timer starts the sequence.
Great questions!
I don’t offer a build up of another’s radio - I am running out of free time and have too many Radios (according to my wife… :roll: ), so no trade-in services offered yet either. The mods aren’t too complicated, but you really do need to solder the connections.
I don’t even plug in or test the chargers, they just make a great desk stand that will hold the radio upright and not let it get knocked over. They do weigh a lot, so its good that USPS has flat-rate shipping boxes!
The chargers won’t charge the standard 9V batteries that the Sound Module is set up for, and are designed to support the large heavy batteries that completely fill the battery compartment and that wouldn’t leave room for easy access to the sound module. New MT-500 batteries were also expensive (~$40), so I just opted for an inexpensive easily available standard 9V.
Pm sent over the weekend. Ready to pay for a kit!!
paid… really looking forward to this..
i went with a 2 rotary switch radio with extra static
is ther any tracks on the sound modual? GB theme song etc? sorry if its been coverd iv not had time to read through the whole thread
I must have missed it - PM Sent back to you for sure this time!
All of the space in the sound module went to quotes from the movies and the game. No repeat of what is in the pack sounds, and no songs. The sound fidelity of the walkie talkie is not the greatest for music, but the quotes sound great!. I will post a list of all of the included quotes soon - guess that fell off of my to-do list. I just got too excited when the boards were ready to ship and I could let the soldering iron cool down!
When you get the module and have it all hooked up and working, if you remove both of the internal shorting jumpers and set the dial to a 4 or higher, when you turn the radio on it will go through all of the quotes in order - GB 1 movie, then GB2 movie then the game quotes. Just momentarily press the talk button after a quote finishes to immediately start the next quote so you don’t have to wait for the internal timer to start the next one. And don’t forget the specials by holding down the talk button for a longer period of time and then letting go.
paid good sir!!
Doug - just got mine in the mail, and I had it hooked up and ready to go within about ten minutes! (I already had my MT500 mostly cleaned out beforehand)
Excellent work, again - this is really an amazing thing you’ve created. So cool.
There was one thing I had to modify from your instructions - since I ripped out the guts of my radio months ago to save on weight, I had actually taken out both circuit boards, leaving it pretty bare, so I had to find another spot for the green wire. Here’s a photo from your instructions with my added notation:
The green arrow is the original spot for the green wire, but since that area was removed from mine, I was able to just solder it into the unused threading marked by the red arrow. I assumed based on your photo that it was basically just a spot to ground the main switch, and it works just fine, so if anyone else has a similarly gutted radio, this will solve the problem.
Thanks again man - nice job!
Can’t wait for mine to get here!
Doug - one thing I’d love to be able to do is wire up the power switch/volume control on the radio to the volume control you have on the board. I assume it would be a simple swap of the pots, but I want to check with you to see if you think it’s viable. I guess the only thing would be potentially bumping it and having it go through saying the numbers or doing that every time you turned it on, but it might be worth trying nonetheless. Did you mess around with that as an option at all?
I tried to keep the number of wires to a minimum, and was concerned about different potentiometers - there is such a variety of knobs and switches in these radios that I figured it would be one less variable to have to deal with. The sound module’s pots have been chosen to work well with the processor on the board. You would have to see what resistance the volume pot is and it may work as a replacement or a suppliment to the on-board pot. The Volume pot is a 10K pot - I can’t recall what was in the Radios. If it was fairly high (100K or more) you could put it in parallel with the board’s wiper to ground and then the outside knob could lower the volume over what ever the sound module set as a max.
The potentiometer needs to stay away from the battery voltage on the switch, so take care with the wiring!
Here is a list of all of the included quotes… There may be some typos, so be kind!
Wow, this thing is great! If you are on the fence about getting one… just do it. I’m a fairly skilled builder but really stink at anything that involves soldering. With the easy to follow step by step directions even I was able to get this up and running pretty quickly. Trust me, when you flick it on for the first time and hear Ray, Peter, Egon, or Winston talking to you, you will not be disappointed.
if you have any left id like to get one kit shipped to australia. I have a 2 rotary switch type mt500.
Cool - good to know. I’ll probably leave it as is, but I’ll play around with it sometime and let you guys know if there’s anything worth trying out. Thanks again!
So, I opened up my walkie last night in order to prep it for the sound kit which is coming today. I noticed that the grey wire coming off the board going to the talk switch is detached. What my question is would I need to re-solder it to the tip or can I simply solder the proper wire from the kit to it and not worry about the original cable at all?
Using Carpenteria’s photo to give you a better idea. The grey wire (just to the right of the red arrow) coming from the small brass tip (which goes to the talk switch), going to the blue wire of the sound kit is what I am talking about. Should that be re-soldered or can I go directly to the sound kit to the tip? I would think it would need to go back to the board. However, looking at Carpenteria’s connection, it looks like the sound kit completely controls the switch now?
I had removed that gray wire from my radio previously as well, and all I had to do was solder the blue wire to the remaining tip - works like a charm, and less loose wires (by a millimeter or two).
Sweet. Thanks for the quick reply. That’s what I was looking to hear. I’ll be wiring mine up to later tonight and hopefully all will go well. My setup is a little different than what everyone else has. I had an extra wire from one board to the other and had to be cut to remove the first board. The colored wires on the back are also woven together with like a plastic mesh and its gonna be tricky cutting the right ones.
pm and money sent for extra static.