Getting the Cyclotron to pop out?
Probably best bet would be Linear Actuators. At least that I can think of off the top of my head, besides a spring loaded item that you manually push back in (which could be made for cheaper).
Hmmm, won’t let me re-edit previous post. Okay that sucks.
I want to add a word of Caution. The sprinkler valve and CO2 tank system can be done, but do NOT fabricate the system without pressure-rated products. I can not stress that enough, we’re not talking about tire pressures of 30psi here. The CO2 tank is at static pressures of 650-800psi, and before the burst disk ruptures can get up to 1800psi. That’s bomb territory. Don’t treat it lightly, always keep safety in mind.
Not to scare people, I mean I carry a 68cubic inch 4500psi carbon fiber bottle under my shoulder and dive/crawl on the ground all weekend, so it’s not like if you look at it wrong it’ll explode. They are actually remarkably safe, over-designed, and if treated right can last a lifetime w/out failure. Just want people to keep in mind the reality of the product they could be working with and not cut corners.
In fact if you want to be on the over-safe side for the SHTF folks there are 3.5oz CO2 tanks out there as well. Obviously smaller, and their smaller structure tends to make them a stronger product. Like breaking a twig between your fingers. Find a piece that is 4" long, put in between your fingers and you can snap it easily. Find one 1/2" long and good luck.
Keep in mind though if you don’t have a local Paintball Field to fill these tanks places like Bass Pro Shop, Dicks Sporting Goods, Wal Mart, etc. tend to have fill stations available. But bring a scale. Trust me. Most places have people that are a little… slooooooow. Chances are they just open the valve and shut it, they never weigh it. You want to make sure of 2 things. 1) They don’t OVERfill it, because that can make it build pressure rupture easier. And 2) They don’t UNDERfill it, because you want your moneys worth and don’t want to vent it once and suddenly be empty.
ALSO another item to add since we’re not talking about 12grams but instead larger CO2 tanks. For a safe and reliable setup I suggest a Regulator. The average sprinkler valve is probably rated in the 100psi ballpark, but a CO2 tank is obviously going to be much higher than that. So a regulator is highly suggested.
These will probably cost more than the rest of the entire setup, or they can at least. Personally I suggest Palmers Pursuit Shop (link - http://www.palmer-pursuit.com/cart/index.php?main_page=product_info&cPath=8_9_28&products_id=175) for CO2, they are indestructible regulators and handle CO2 very well whereas most all others in the industry are made for Compressed Air systems. Plus they have one w/ a Female threaded ASA (air system adapter) which you’ll need one for the tank to screw into. But that doesn’t mean they won’t work with them, just that Palmer’s is more reliable and will last longer, but we’re also talking about weekly use and over the course of years in Paintball. I would imagine that these vents would be used, what, 6 times a YEAR max? Others should be fine. The key is finding ones that can regulate to a low enough pressure, I’d suggest 50psi, 100psi max.
You can find others besides Palmers, but you’ll need an ASA and some hose connections to connect the ASA to the regulator, and then another ASA to thread onto the end of the regulator (none are sealed, all are inline designs in Paintball unless they’re built into the tank) which will have a hose going to the Sprinkler Valve.
Hit up eBay if you want, good source for cheap paintball equipment. Or paintball website forums, they have a lot of used gear for sale, too.