Nstevic01's GB1 Pack Build

This has been a long time in the making. Last year when we met the Tampa and Orlando guys I was inspired to begin my pack build. I spent the next 4 months tracking down each individual component and made a list. Once I got my Bonus and Tax return, I started placing orders.

After 9 Months of research, ordering, and waiting, I am now at a point where I can get started. The last main component I am missing is the thrower, I ordered one from CPU64 about 3 months ago so it should be close to being finished.

I would also like to say thank you to ALL of the seller’s listed below, you have been awesome to deal with and I appreciate the time spent answering all of my questions. You will be the ones I point to when someone wants to build a pack. A big thank you goes to AJ for providing a easy place to get some of the specialty parts, but my bank account hates you.

I am debating on placing up my excel tracking sheet which has listed all of the parts, sellers, prices, and shipping costs to give someone new an idea of what it costs to build one from the ground up. Had I have known how much I was truly going to spend sourcing everything, I might have just bought a “starter” pack for half the cost and gone from there.

Let’s just say I am now north of $2000, not including CPU64’s thrower, paint, primer, filler, etc…

Parts list to date:

Real Parts:

Replica Parts

  • Legris straits

  • Legris banjos

  • SMC elbows

Vincenzo330’s:

CPU64’s:

Anhcon’s:

jpa35’s:

  • aluminum shock mount (to hold me over until AJ’s real bellows are done)

Nickatron’s:

Multimedia Mahem’s:

  • thrower grips

  • full tubing set

GBFans’:

  • aluminum side knob set

  • bellow replica (on waiting list)

GhostGuy’s:

  • Mighty Microcontroller for lights and sounds

Crix’s:

JoeLuna33’s:

  • aluminum label set

gEkX’s:

  • hardware set

And of course the pictures, there are some missing, but this is what I have on my HD at this time. I will transfer the rest later:

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4277.jpg)

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4279.jpg)

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4280.jpg)

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4282.jpg)

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4283.jpg)

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4657.jpg)

Wow - this looks like it will be an amazing build. Good luck.

Exciting! Looking forward to seeing this progress. I’m always amazed at how much more organized some of you guys seem to be than I was when I started my build.

And hey- nice cooler :slight_smile: I worked on that.

Some progress on the pack.

I started with mounting the brackets to the mother board. I traced the shell out on what was the best centering I could do. I will have to trim a little of the board towards the bottom where it does not line up just right. Once I traced the shell, I used a micrometer to measure the thickness of the pack walls where the brackets were placed and used those numbers to place the bracket.

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4732.jpg)

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4733.jpg)

Once I got the brackets on, I worked on tapping them to be mounted. Once I had the shell lined up on the board, I used clamps to keep the shell as flush to the board as possible while tapping.

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4730.jpg)

Test fitting the shell to the board

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_47241.jpg)

I went with 3/8" bolts to mount the pack to the ALICE frame. Since I could not find spacers for the bolts, I picked up some steel tubing to make my own. I started with 1" spacers, but found out that GB1 packs used 1/2" spacers. So I had to cut new ones, pictures below are of the 1" ones.

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4729.jpg)

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4734.jpg)

Also picked up the rubber spacer that the metal one will sit inside. I will need to paint it black, but it was as close as I could find.

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4735.jpg)

ALICE frame mounted to motherboard, used wing nuts to secure on the backside.

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4736.jpg)

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4737.jpg)

More to come!

More work done tonight. Mounted the bumper, booster frame, and PPD. I never would have thought it would take so long to get everything mounted up.

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4743.jpg)

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4744.jpg)

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4746.jpg)

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4747.jpg)

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4748.jpg)

Did you buy the shock mount directly from Jason or from someone else? I have about 7 of them from Jason directly and they don’t look like that. Or did you do some kind of modding to it? Both the GB1 and GB2 versions from him don’t have a large hole like that, and don’t require a large bolt to mount. I know you said you are replacing it so it doesn’t really matter, I’m just curious.

I got it off of ebay from someone who said it was Jason’s mount. I thought it looked a little off, but at the time nobody was selling them at all. I ended up only paying $15 for it so I wasn’t too concerned about it. Like I said, it’s more of a placeholder until I get my hands on the AJ bellow.

Would you consider letting one go? :slight_smile:

Finally got some time to get the pack painted. She is fully primed and currently drying. I do not plan on weathering the pack just yet, I’d like to enjoy the fresh off the workbench for a bit. But to give myself the option for weathering, what type of silver paint is being used as an undercoat?

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4863.jpg)

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4862.jpg)

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4861.jpg)

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4864.jpg)

Still working on the painting, I’m finishing it off with satin black but I can not seem to get a perfect coat on it. There are areas that don’t look as dark as others. So a few more coats should do it.

In the mean time, I am working on a little something for the XLR/Switch panel. Since I am getting the Mighty Microcontroller for the lights and sounds, I figured I would wire up the XLR connector for USB connection and use the DC barrel plug for charging. I ordered up a Switchcraft 4 pin socket and a female 4 pin connector.

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4870.jpg)

Panel is done!! Best part is that it works!

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4888.jpg)

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4887.jpg)

Awesome!!!

Finally got the painting done, on to some assembly…

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4889.jpg)

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4891.jpg)

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4893.jpg)

Little more work tonight. I tore apart an oil filter and took the bottom plate out, then welded it inside the N-filter. I will be using this to attach and detach the N-filter. Reasoning behind this, is a “reveal” N-fitler. I’m not 100% on the internal design, but I wanted to make something that could possible represent what was meant to be there. So I will be studying Nitrogen and Liquid Nitrogen filter designs and come up with something that is visually appealing.

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_P1020579.jpg)

Started closing off the N-filter mounting area and will be working on the pole that the filter will mount on.

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_P1020578.jpg)

That’s it for now

MIND. BLOWN.

Sent from my DROID X2 using Ghostbusters Fans on Android

I have a question for you! What is the center jack, next to the Switchcraft XLR?

Standard DC power jack (Size M). It will be wired for charging the pack battery.

I did a google image search for liquid nitrogen filter, and on the third row is your picture above of the inside of the N-Filter. Looks like your off to a good start :slight_smile:

1 Like

Some very smart ideas in this thread. Very smart.

Just got back from Home Depot…should have the mock up in a couple of days.

As far as the filtration goes, this was one of the only filters I was able to find. Apparently it’s not very common to filter LN.

For those interested in specs:

While researching the properties of LN, I came across this:

So if I am understanding this correctly, in the event of pack components overheating and causing the LN to expand, there would need to be some sort of venting system in place for safety. Probably why the VG Pack has the ability to do so.

This of course gives me the excuse to rig up an emergency venting system, which will be vented through the N-Filter holes. I already have an idea of how I will do it. A guy building an R2 unit came up with the idea, and it apparently works well. The mighty microcontroller should be easy enough to program the solenoid to work with the fore-button on the barrel. Link to his blog if you want to check it out: Victor's R2D2 Building Diary: August 2007