Nstevic01's GB1 Pack Build

A quick teaser for you guys…I still need to work up the filter element and sprayer but here is the beginnings of the mount. It will be riveted to the motherboard and will require that the filter be unscrewed to disassemble the pack.

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_P1020583.jpg)

this just became my favorite build ever. this was a ridiculously hard feat to master, but you did.

keep up the good work!

ProtonCharger likes my pack…this pleases me…

This is legendary, dude! I can’t wait to see that puppy in action. I think this is definitely the best build on a Bigi330 shell yet ==6

Just a quick thing I noticed, the wing nut you’re using for the upper ALICE frame mount might end up clashing with your ribbon cable and making it hard to close your shell. You might want to try a flush nut or something that takes up less real estate.

Also, I used the same configuration for my top spacer but I filled it around the tubing with plumbers epoxy putty :wink:

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_IMG_4735.jpg)

Nice build. Keep going dude!

Sent from my GT-I9100 using Ghostbusters Fans on Android

Thanks for all the support guys!! I will have a few updates a little later. I got the post mounted to the board, turns out it was able to be attached via the wingnut for the ALICE frame. So I drilled three small holes for nothing. Gotta fill those in. But I am now working on the tubing for the ventilation system.

The wingnut is actually low profile enough to clear the shell, I’ve worn it around the house when nobody was looking a few times. Hehehe, as for the top spacer, I was thinking about that but it compresses a bit with I put it on there. I have yet to put in on after painting it, i hope the paint doesn’t crack.

On to the updates for today’s work:

So here is the completed mock-up with the filter off:

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_P1020585.jpg)

Filter on:

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_P1020584.jpg)

I am thinking about painting the whole rig chrome, to kinda represent the polished look of the actual LN Filter I posted earlier. Let me know what you guys think.

Mounted to the motherboard:

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_P1020587.jpg)

Cover on:

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_P1020586.jpg)

With the shell:

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_P1020589.jpg)

And of course the mock-up for the venting system. I used the smallest copper tubing I could find, and will be drilling tiny holes in the “ring” which will line up with the vents on the N-Filter. I will be digging out some old R/C car servos I have in the shed and will use those for controlling the venting.

![image](http://www.gbfans.com/images/pb/nstevic01/Proton Pack Build_P1020590.jpg)

Whaaaat! Too awesome.

Please put videos up when this thing is operational! This is unreal.

This is going to be great.

Ask and you guys shall receive

Its so awesome!

Nathan all your using is a can of spray duster right …damn ..looks great …I ve got automotive shaved door handle selinoids in the shed…12v

1 Like

Yeah, duster can and the custom copper line. I have a generic 12v door lock actuator on the way, but I wasnt sure what the working load was. What is the length of travel on your solenoids? And are they capable of being held in the extended position for as long as 12v is applied?

WHAT. DID. YOU. DO… RAY???

See that might be my problem they have a fairly long stroke (over 1/2 an inch) and there rated to open a classic car latch ..25 lb +…and you dont want them to extend you want them to retract btw…but yes they will stay as long as the circuit is closed

1 Like

I should be getting the one I ordered sometime this week, in case it isnt good enough, what would you want for one of yours?

really …after the last to days of tech support …its on the house…let me dig em out this week ..my backyard is under water right now and id have to swim to my shed..LOL

1 Like

Much appreciated Skully!!

That is some truly next-level sh-t right there. Well done.