Joeluna33 3/4 Scale RGB Pack Build by mr0072003

Ok guys, now that my Movie Pack is pretty much done I needed another project. So why not give

a nod to one of my favorite cartoons The Real Ghostbusters. My wife showed some intrest in

being a Ghost buster, so I thought the 3/4 scale made by joeluna33 would be a great pack

for the wife. She is small enough that it would look to scale for her and would not be as heavy

as a full size pack.

So first things first was to get the Shell. Love this shell and the quality is TOP NOTCH!

Here is what I got:

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2394_zps9848d67a.jpg)

First thing I did was create a motherboard. I used some MDF board that I got at OSH Hardware (about $5).

Using a Sharpie Marker i placed my shell over the MDF and traced out the shell

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2395_zpsbfae4dfd.jpg)

You can see it traced out nicely here.

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2396_zps47846002.jpg)

Using a Jig saw, I cut along the traced line.

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_1392_zps91e7151a.jpg)

Whoala you have a mother board

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2397_zps38233d0f.jpg)

Now the Brackets

I used thes Corner braces. I figured since the pack is small these would work.

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2398_zpsbfdef622.jpg)

Drill your holes with a 7/32 drill bit. The holes on the brackets were to big for my method.

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2400_zps921a642d.jpg)

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2401_zpsc811bf76.jpg)

You will want to drill 3 more holes where the dimples are. You can see the dimples clearly in the pic above.

Your Bracket should end up looking like this. Here you can see that I drilled three holes.

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2458_zps2d7b3b33.jpg)

Now lets trace the bracket on the mother hole and mark the holes.

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2461_zpsfb7a58e4.jpg)

Drill Holes with the same 7/32 drill bit.

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2462_zps0abc66ad.jpg)

Using 3/16 5mm Pop Rivets I braced them to the motherboard.

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2463_zps221bcac0.jpg)

Did this in the best spots for me on the rest, you get the idea though. Here are some pics of that progress.

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2465_zps3d39312d.jpg)

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2466_zps79e287ed.jpg)

Now using kind123’s method of attaching mother boards, I did the same here. Here are some pics of that.

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2400_zps921a642d.jpg)

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2402_zps9f2a7b15.jpg)

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_1417_zps754aef6a.jpg)

Next up was the, what I like to call the HGA, but who knows. I used some 2inc in lenght and Diamter (i think)

PVC tube and using the left over MDF, traced out some circles and cut them using the Jig saw. Once I did that

I used JB weld, to glue them to the PVC pipe.

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2414_zpsbd880a3f.jpg)

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2415_zps56c2cb06.jpg)

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2420_zpsf4f34826.jpg)

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2422_zps8d5a1dc5.jpg)

Now to what I call the “Booster Tube”. Again I used some PVC Pipe that was to scale, sorry guys dont know

what size I used. Then got a Funnel that was the right size. get a 4 pack of 4 sizes for 1.50 at Frieght and Harbor.

Found the best size and fit it through.

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2407_zpsdb2c7da3.jpg)

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2408_zps87144154.jpg)

Cut the tip off and Hot Glue in place.

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2431_zps03d38a9e.jpg)

Useing some Bondo Filler, clean up the mess. Sand down as necessary.

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2432_zps027779d2.jpg)

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2433_zps04b7c7c7.jpg)

Now attaching the Tube to the shell. I used 2 U shape brackets and drilled holes in the PRE-DESIGNATED spots

already on the Shell :slight_smile: .

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_DBE8D68B-2D8F-451B-AA92-087230A57CE8-1960-000002091BDCF517_zps6ce3b1c0.jpg)

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2410_zps13dee255.jpg)

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2411_zpscbd3321a.jpg)

This pic was before the funnel tip was cut off. But i used 1/4 nuts in the back to hold them down.

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2413_zpse654cf86.jpg)

cosmetic

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2429_zpsc256d630.jpg)

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2439_zps0d22d795.jpg)

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2440_zps3fe7b63e.jpg)

Holes for the Tubing..attaching HGA…

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2424_zps3f959de1.jpg)

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2441_zps4db6b916.jpg)

Next I got a L tube and added that to the top part of the Tubing..

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_2C3CA9BC-BA1C-4A57-B6A4-FD9227FB9CCD-1960-0000020939818B5C_zps148af918.jpg)

using a Rubber gromet in both places to hold it in.

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2449_zps493dac6f.jpg)

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2451_zpsa19317ef.jpg)

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2453_zps53782e54.jpg)

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2455_zps66f443dc.jpg)

Lights/switches added, Tubing with Clippard barbs, Push button added to the pack

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_2467_zpsec3bc666.jpg)

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_1404_zps60e85cd2.jpg)

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_1405_zps62c0cb29.jpg)

Created my Bumper, added the Shock Mount and used some HOt Glue to Hold the Tubing in place. (Use Vasoline on the tubing when gluing the tube in the hole, this will help the tube to come out once its ready for paint.)

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_1427_zps9a095d40.jpg)

So here is where I am now… You may notice that I have not mentioned the light on the top, as its wrong and realized that this should be a Gauge not a light with a metal peice on the bottom. If you look out our Reference pic of the RGB drawings, it looks like this, but thanks to the experts I was made aware that its a guage… so off to hunting for the right guage.

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_1426_zps78e2091e.jpg)

Looking great, love the texture on that shell :wink:

Looking good so far, the only elements I’ll remark on are that I believe the yellow tank that’s surrounded by the hose is only hemispherical, rather than a full sphere on the cross section. The other element is that if you’re able to get a hold of it, some flexible metal conduit should replicate the hose that surrounds the yellow tank (and the the hose that runs along the front half of the Proton Gun) better in terms of the visual appearance than the black split-loom.

Are you planning to give it a movie colour scheme, or try remain true to the cartoon?

looking good. I love my RGB pack alot. definately a fun build and its awesome to see another one being put together. I built my own light kit for mine and it works awesome. If you need any advice on the thrower or anything with the build i am more than happy to give ya some input.

Hahaha… Kingpin we were on the same track as far as the metal Conduit. I actually bought some of it. some thick and thin stuff, but the conduit is not flexiable enough to wrap around the HGA as it breaks before I can get a good enough bend on it. I may try playing with it later. If this does not work I will be painting the split loom to look metal like.

As for the Color… thats a big debate in my house right now. I really want to give it a real color scheme…BUT the wife really wants a theme pack (i.e HK, or some sort of Sanrio element… :whatever: But I really want to try and nail down a realiztic version of this pack!

That would be great. Your thread was one I tried looking at for research, but your links were broken.

awwww, i see your point. i did some spring cleaning to my photobucket account and did not realize the links got all messed up. Thanks for the heads up.

i readded all the pictures back to that post. You can check em out now. They are all in the last post. the second to last picture is actually a video of the lights working in the pack so you just need to click the picture to see the video.

OK guys, a little update from my work the past few days.

ALICE Suspenders attached and added.

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_209519D3-59E2-4F90-B411-DEB87B66E311-2260-000001B511D79AA1_zpsdae4926b.jpg)

Red light added to the top of the pack. I was going to use the Trap lights for this, but I felt it was too small and got lost on the pack. Went to Radio Shack and got something a little bigger.

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_1442_zpsb32de6fe.jpg)

Next up was the part that goes on the side of the pack. I have watched a few episodes recently and still not sure if its a light or not. I decided to take some liberty in making my own touch to the pack and making it a fuse holder. WDYT?

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_1443_zpsb452586a.jpg)

Finally I got rid of the light on the top right of pack and added a Guage. Cool thing about it, is that it was like $5 and it says slime on it. I will be adding some red Gel over it to get the red look later.

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_IMG_1444_zps05d11d73.jpg)

That’s looking awesome so far. I think the fuse holder was a nice choice and looks like it fits the pack perfectly.

Looking great so far.

I agree the fuse holder is a nice touch. The gage is pretty nice to. I am actually going to be changing my gage out and some point when i build a modern style RGB pack. My pack right now, the gage i have is actually connected to the batteries i use an displays the current voltage. When my plan for my Modern RGB pack is use a digital volt meter they use for the street racers. Its actually pretty nice cause its round hand its the same size. But thats later on. I am truly digging your build so far.

I bought one of these off of Joe as well to build for my son and I just received it in the mail today, I’ll keep an eye on this thread and will eventually start one of my own as I start to build mine.

Great to hear Matt, Joe’s stuff is great you will find the pack is a breez to work with!

Small update on the pack…

I have switched out the ugly Pep Boys Horn Button for a more authentic looking one while still trying to keep the generel RGB be look down. I sadly got the wrong color shipped to me from the buyer, but I can paint the color I need when I begin to paint. I also added the Red Gel over the gauge. Many put it on the bottom, but my version will have on the top. I have seen to many pics and references that when the red does show up on the packs, its either a full red or the top shows red while the bottom is black. So I opted for what you see in the pic below. You can still see the word Slime this way too :cool:

For now enjoy!

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_D693CBA8-7D64-4485-83B0-C2E471DE71B0-336-0000007B91C83946_zpsf010a4a9.jpg)

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_81643675-04C9-40FE-8C33-5A235E79A1E0-336-0000007B98B8EB7E_zps04573520.jpg)

EDIT -

Here are some close ups of the gauge with RED Gel. I did it both ways…which way looks better?

On top

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_F4CDC038-0B5D-4639-81E3-751A81596AE7-336-0000007B39607A41_zpse5d6d555.jpg)

Or Bottom!

![image](http://www.gbfans.com/images/pb/pvellos/Ghost Busters_RGB Pack_8C48E9F8-2C90-4197-8419-B78D05798848-336-0000007B346B6208_zps81aeeded.jpg)

I think the red on top looks good, I’d like to get my hands on one of those exact gages when I put my sons pack together where did you get yours from?

I got it at Pep Boys… It was near the pen gauges!

Hmmm, don’t know if we have Pep Boys in Canada. I’ll just have to keep my eyes open.

Basically any auto parts store. Search for Slime Air Pressure Gauges on the interwebs!

Cool, thanks for the assist!