MattyCollector Neutrino Wand Mods?

Just curious on how you removed the red hat light from the matty wand?

It might be there beneath the orange cover.

THank you so much for posting this. This was a great quick fix and looks really nice. It fits perfectly snug to the wand handle and the used CPAP hose that I use on my old pack fits nicely over the tube plug. THank you sir!

1 Like

Ha in use a CPAP machine and I think all the time about how the hose would be almost perfect for on the pack…just go to paint it black

Thanks, I’m really glad that worked out for someone else as well.

Update on the Green Wire. I got some plastic nuts and basically forced the clipard barbs on them. They where the right size according to the measuring thingy at Lowes but they still didn’t want to turn. However a pair of pliers and a few tense moments and the nut there on. Then I found out they where just a tad to big for the holes left behind by the rubber green wire. Sanded the heck out of the one going in the top and finally got it to fit. Got a little impatient with the second one and took it to work where there’s a belt sander. . . .kind of took off a little to much material. However it still fits and a little bit of super glue and it’s in there good and permanent. Going to pick up some paints soon for the banjos and maybe some black to cover up the nuts and viola. Now just to wait and see if someone makes a light kit that interfaces with the wand.

More than likely the threading on the barb was NPT.

I noticed when I first got the wand that when i went to grip it with my right hand, the rubber green hose was kind of in the way. So I decided to zip-tie it. Not too tight, but just enough to keep it out of the way. Quick and easy.

Also, has anybody’s intensify switch been sticking? Mine didn’t at first, but now I kind of like it that it does so I don’t have to hold down the button. When I’m ready to stop wrangling in some ghosts, I just use my thumbnail to pull back on the little ring/lip on the button.

image

image

Only things I have found with my gun is when u first power it up the tip will extend and go back to normal then make the power up sound and turn on the slo blow light. Acts the same way as some of the pke meters do. Oh and the front barrel seems to be a tad loose. Nothing a little epoxy can’t fix tho.

From looking at some proton wand builds on here it made me wonder exactly which labels the matty wand is missing. Can anyone tell me exactly which labels are missing and where?

The wand is missing the 1,2,3 decal or dry rub transfer on the upper dial, the slo-blo decal, the small danger decal on the instrument bar, and the two decals on the bottom of the gun track.

Here are a few of the mods that I have done to my proton wand so far.

Final painted shot of the hose coupler that I made using PVC parts

![image](http://www.gbfans.com/images/pb/unreal05mustang/Mobile Uploads_image_zps8a76281b.jpg)

Another shot of the hose coupler

![image](http://www.gbfans.com/images/pb/unreal05mustang/Mobile Uploads_image_zps3393ce42.jpg)

Shot of the rear instrument bar with Slo-Blo decal and Danger decal added

![image](http://www.gbfans.com/images/pb/unreal05mustang/Mobile Uploads_image_zps4c36ade1.jpg)

Top shot of the wand with the numbers added to the upper dial

![image](http://www.gbfans.com/images/pb/unreal05mustang/Mobile Uploads_image_zps25883d6c.jpg)

Here I added the decals to the gun track

![image](http://www.gbfans.com/images/pb/unreal05mustang/Mobile Uploads_image_zps90ed14e7.jpg)

My next mod will be to paint the banjos the correct color.

Awesome.

I forgot to mention that I installed a Dixie cup bracket to the gun track. I sent my Mattel V-Hook off to CPU64 so that he could make a template and produce the other half of the hook.

Here’s the new green wire!!

image

image

Took just a little bit of superglue to make sure that everything was nice and tight. Really make the whole thing look a lot better.

Thank you sir! I can’t wait to see the hook. Mine fits on my pack but it’s still a little loose and low, so I would really love to make this look even better.

There is another member on here that is getting a male end ready for the matty v-hook. I just forget exactly who it is at the moment. Can’t wait to start adding these awesome mods to my thrower.

why do people need to make a new v-hook plate? did matty use the wrong kind or have all custom built packs been made with whatever was found at a hardware shop? sorry dumb question but I’m very curious why if we base our packs from the movies and they used a smithsonian prop from the movie why is the hook attachment different?

the V hooks differed from Pack to pack and from movie to movie. Also the Matty wand is smaller in scale compared to the screen used wands.

its smaller? WTH? then why bother making it? i didn’t know that. thanks for the info

They made it with the view of having the thrower be mountable if they ever approached the rest of the Pack.

In fairness, the hook itself looks like a fine piece… it’s just the desire by those who want to use it on a real Pack that’s been driving the need to replace some of them.

The hook on the Mattycollector wand fits the one on my pack perfectly, so I have no complaints.