Hello ladies and gents,
another little update:
-some more parts are ordered
-gbfans shop orders still on the way
-some 3d printer parts in progress
But I need your opinion…
should I replace the hat lights, the intensify button and LEDs from the Spenglers neutrona wand with the lights from the wand which was attached to the pack?
If you wanted to be more accurate I would. I did it on mine but I decided against the Spengler wand as it felt too much like a toy. You can replace the clippard with a real one too as well as the heat sink, gun track, the knobs and remove the fake grip get an insert and use real tape.
Yes I want haha. The clippard is one of the 3d printer parts that are in the work. I’m honestly, a original clippard is to expensive for me with the shipping costs to germany… The heat sink and gun track same like the clippard… maybe I’ll find one some day in germay. The fake grip are in progress, insert is another 3d printer part and some nice olive green military tape is ordered too 
It’s a lot of work… I looking here in germany on ebay and amazon for similar parts to avoid the high shipping costs. My Pack will not be 100% screen used. It will be “me” used 
It will be my pack and not from one of the heros from the movies
But thanks for inspiration and helping to make a decision Stay healthy
You too my friend!!! Can’t wait to see your progress!!!
Thanks man, I’ll update this thread as soon as possible
Can i have the link of the green tube please?
I send you a DM
Have a look at radwell.de for Clippard valves, I got them from their UK site. Still quite expensive, but a lot less than getting them shipped from the US! If you want to replace the red slo-blo lens and clear lens on top of the gun with the real parts they’re quite cheap to get online too. I got the red one here and the clear one here, they’re about 4 Euros each
Thanks!!!
PS.: The white LED requires a 250 volt supply? How?
Just strip out the bulb in there and use the one with your light kit, basically just use it as a lens
That’s make lens! Errr I mean sens :-p Thanks again!
Hello my friends,
another little update, because a few parts arrived or were finished today:
Found these two on a local online store, they are slightly larger than the original one but its fine for me and my wallet 
These two babys I found on ebay germany, they are just perfect for the green tubing on the wand and I paid less than 10€ incl. delivery!
My Dad finished the female V-Hook part today. They match PEFECTLY.
I ordered some 10mm LED in red and resistors. Also I took some old halogen bulbs, cut out the glas lens and chiseled out the lamp and ceramic and now I have 4 wonderful refelctors for the cyclotron cause I hate these multiple LED plates which are currently in the pack. I want the oldschool “bulb” look for my cyclotron.
Found on amazon. A beautiful brass rod, 6mm diameter and 1000mm long. For the Ion arm on the pack because the old one are just brass pipes…
The 3D printed grip insert for the Spenglers Neutrona Wand… Yes I have to grind it haha
**The Clippard parts don’t turned out very well… Before I bother with sanding, filling and painting, I decided that I would save money and order real clippards. The 3D prints didn’t cost me anything.
**
Thanks for your time, I’ll be back soon
Hello hello,
today another little update:
-Nice Military Oliv green Tape arrived today (it looks brown on the picture, it must be the light in my room… It has a very nice olivgreen color)
-AUX Input females for AUX Mod on the Spenglers Wand arrvied today too
-Printed some Labels today on Vinylfoil and plotted them out
Also I started to mod my Spenglers Wand, I’ll post the final results because it’s a lot of work an I don’t want to take a picture from every step haha
Stay tuned and healthy!
Hello folks,
a lot of time has passed, but I was busy with work… SORRY!
Now a little Update:
-My first package from GBFANS.com finally arrived! I LOVE THAT PIN!!!
-I modified a few things on my Spenglers Neutrona Wand: smaller black intensify button, LED caps and the orange “thing” changed, leds re-soldered (still in work) and make the coolings fins more used look and cut out the transparent plastik.
New updates soon!
Hello guys…
i finally managed to remove the shell …
What can I say … it’s a big fat mess …
Hot glue was apparently his best friend … he just fixed everything with it … but just take a look for yourself.
Also, I think the whole shell was 3d printed. Take a look at the last two pictures …
A big cleanup awaits.
I will contact you with the result.
Stay safe, Peet.
Yikes. :shock:
Hello guys,
just a small update:
I found a printing house for the waterslide decals and they printed me some of the circuit diagram decals from the N-Filter
My Dad helped me the Ion Arm brass rods to round their heads
I started to repaint my Neutrona Wand but of course is not finished yet and I also replaced some nobs and I rounded the corners from the cooling fins on the side of the Wand
Thanks for your time
Greetz Peet
Hello Guys,
please excuse the long wait. I had a lot to worry about and a move behind me and could hardly work on the pack.
the pack was created entirely with the 3d printer. I had a lot of holes to plug and fill and repair.
But I am convinced that the result will be good
I will paint soon and then there will be new photos!
My Spengler Neutrona Wand is going to be really good too Comparison pictures of the original condition and now coming too!
Best wishes
