Toddler proton pack build with pics 9/14/2011

Hey everybody. Since It’s been a little while since my last build, I decided to get back into things and make a kiddie pack for my 2yr old son to go with his Ghostbuster costume for Halloween this year.

The basis was the Kid’s Fireman water sprayer pack (Got it off of Amazon for 10 bucks!)

![image](http://www.gbfans.com/images/pb/knoxville_ghostbuters/Mobile Uploads_IMG_7734.jpg)

The best part is that everything else I needed for the details I had in house so my cost for this has been minimal.

![image](http://www.gbfans.com/images/pb/knoxville_ghostbuters/Mobile Uploads_IMG_4851.jpg)

Since this pack is small and somewhat rounded, I decided to leave off the ion arm and focus in stead on the gearbox, powercell and cyclotron.

The gearbox is made from a small container that used to hold 2 pacifiers. My son is too old for them now but the box as the perfect shape! for the ridges/plating on the box I used craft foam.

![image](http://www.gbfans.com/images/pb/knoxville_ghostbuters/Mobile Uploads_IMG_3915.jpg)

For the cyclotron and N-filter I used a dollar store kids ceral container and a small, empty Playdoh can. I was originally going to use a play kitchen soup can but the playdoh can ended up a better solution

![image](http://www.gbfans.com/images/pb/knoxville_ghostbuters/Mobile Uploads_IMG_6447.jpg)

Since the pack is for a 2 yr old. I made sure the boxes and cyclotron were screwed into the pack base.

![image](http://www.gbfans.com/images/pb/knoxville_ghostbuters/Mobile Uploads_IMG_0230.jpg)

My son supervising the progress

![image](http://www.gbfans.com/images/pb/knoxville_ghostbuters/Mobile Uploads_IMG_6147.jpg)

Cosmetic plating and “power cell” and N-filter attached. The powercell is simply a MiniDV case with the craft foam ridging.

![image](http://www.gbfans.com/images/pb/knoxville_ghostbuters/Mobile Uploads_IMG_2160.jpg)

I added a simple foam band for a bumper and made a crank knob from a water bottle cap and a piece of glue stick.

![image](http://www.gbfans.com/images/pb/knoxville_ghostbuters/Mobile Uploads_IMG_1151.jpg)

Here’s the first coat of paint. Not bad for an evenings work.

![image](http://www.gbfans.com/images/pb/knoxville_ghostbuters/Mobile Uploads_IMG_1295.jpg)

I’m going to add wires and labels and a ribbon cable. I also have 2 red craft foam discs that im going to tuck under the foam bumper and add a few more greeblies to the pack and the wand.

More to come!

Nice start - I always like the kid-sized builds. Are you planning on adding in electronics at all?

I though about it but I wanted to eliminate the amount of cutting in the pack base. That and this is probaly the first in a long line to come so I’ll have plenty of chances to add electonics :slight_smile: